[OpenWrt-Devel] [PATCH] ramips:Add support for MakerModule MicroWRT

郭传鈜 gch981213 at gmail.com
Mon Apr 6 04:33:32 EDT 2015


Sorry please don't accept the v2 patch because Sheng Kai told me that the
flash layout in his patch is totally wrong :-(

2015-04-06 14:53 GMT+08:00 John Crispin <blogic at openwrt.org>:

> Hi,
>
> comments inline
>
> On 06/04/2015 02:15, 郭传鈜 wrote:
> > First of all,this patch is not created by me.I just help him to send
> this patch:-D
> >
> > MicroWRT is an wireless router with 2 USB,1 ethernet port. It
> > has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
> > i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
> > combine with the core board. The detailed information, please refer to
> > https://www.microduino.cc/wiki/index.php?title=Main_Page
> >
> > This patch adds support for it.
> > Because there is only one port,so disabled VLAN and use eth0 as lan
> > port. and only a power LED control by power pin.
> > Signed-off-by: 盛凯 <shengkai81 at gmail.com>
> > ---
> >  .../linux/ramips/base-files/etc/board.d/02_network |   1 +
> >  target/linux/ramips/base-files/lib/ramips.sh       |   3 +
> >  .../ramips/base-files/lib/upgrade/platform.sh      |   1 +
> >  target/linux/ramips/dts/MicroWRT.dts               | 107
> +++++++++++++++++++++
> >  target/linux/ramips/image/Makefile                 |   2 +
> >  target/linux/ramips/mt7620/profiles/microwrt.mk    |  12 +++
> >  6 files changed, 126 insertions(+)
> >  create mode 100644 target/linux/ramips/dts/MicroWRT.dts
> >  create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk
> >
> > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> > index d4ec19d..2035ab0 100755
> > --- a/target/linux/ramips/base-files/etc/board.d/02_network
> > +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> > @@ -45,6 +45,7 @@ ramips_setup_interfaces()
> >
> >       3g150b | \
> >       3g300m | \
> > +     microwrt | \
>
> there is a space here
>
> >       w150m | \
> >       zte-q7 | \
> >       all0256n | \
> > diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> > index fc6eb37..d115b4f 100755
> > --- a/target/linux/ramips/base-files/lib/ramips.sh
> > +++ b/target/linux/ramips/base-files/lib/ramips.sh
> > @@ -202,6 +202,9 @@ ramips_board_detect() {
> >       *"Planex MZK-750DHP")
> >               name="mzk-750dhp"
> >               ;;
> > +        *"MakerModule MicroWRT")
> > +                name="microwrt"
> > +                ;;
>
> spaces here aswell, use tabs please
>
>
> >       *"NBG-419N")
> >               name="nbg-419n"
> >               ;;
> > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > index a5773b5..57a339e 100755
> > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> > @@ -60,6 +60,7 @@ platform_check_image() {
> >       m2m | \
> >       m3 | \
> >       m4 | \
> > +        microwrt | \
>
> spaces here aswell, use tabs please
>
> the rest looks good.
>
>         John
>
>
> >       mlw221 | \
> >       mlwg2 | \
> >       mofi3500-3gn | \
> > diff --git a/target/linux/ramips/dts/MicroWRT.dts
> b/target/linux/ramips/dts/MicroWRT.dts
> > new file mode 100644
> > index 0000000..8088ccb
> > --- /dev/null
> > +++ b/target/linux/ramips/dts/MicroWRT.dts
> > @@ -0,0 +1,107 @@
> > +/dts-v1/;
> > +
> > +/include/ "mt7620a.dtsi"
> > +
> > +/ {
> > +     compatible = "microwrt", "ralink,mt7620a-soc";
> > +     model = "MakerModule MicroWRT";
> > +
> > +     chosen {
> > +             bootargs = "console=ttyS0,115200";
> > +     };
> > +
> > +     palmbus at 10000000 {
> > +             gpio2: gpio at 660 {
> > +                     status = "okay";
> > +             };
> > +
> > +             gpio3: gpio at 688 {
> > +                     status = "okay";
> > +             };
> > +
> > +             spi at b00 {
> > +                     status = "okay";
> > +
> > +                     m25p80 at 0 {
> > +                             #address-cells = <1>;
> > +                             #size-cells = <1>;
> > +                             compatible = "w25q128";
> > +                             reg = <0 0>;
> > +                             linux,modalias = "m25p80", "w25q128";
> > +                             spi-max-frequency = <10000000>;
> > +
> > +                             partition at 0 {
> > +                                     label = "u-boot";
> > +                                     reg = <0x0 0x30000>;
> > +                                     read-only;
> > +                             };
> > +
> > +                             partition at 30000 {
> > +                                     label = "u-boot-env";
> > +                                     reg = <0x30000 0x10000>;
> > +                                     read-only;
> > +                             };
> > +
> > +                             factory: partition at 40000 {
> > +                                     label = "factory";
> > +                                     reg = <0x40000 0x10000>;
> > +                                     read-only;
> > +                             };
> > +
> > +                             partition at 50000 {
> > +                                     label = "firmware";
> > +                                     reg = <0x50000 0xfb0000>;
> > +                             };
> > +                     };
> > +             };
> > +     };
> > +
> > +     ehci at 101c0000 {
> > +             status = "okay";
> > +     };
> > +
> > +     ohci at 101c1000 {
> > +             status = "okay";
> > +     };
> > +
> > +     pcie at 10140000 {
> > +             status = "okay";
> > +     };
> > +
> > +     ethernet at 10100000 {
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&ephy_pins>;
> > +             mtd-mac-address = <&factory 0x4>;
> > +             ralink,port-map = "llllw";
> > +     };
> > +
> > +     wmac at 10180000 {
> > +             ralink,mtd-eeprom = <&factory 0>;
> > +     };
> > +
> > +     pinctrl {
> > +             state_default: pinctrl0 {
> > +                     default {
> > +                             ralink,group = "wled", "i2c", "wdt",
> "uartf";
> > +                             ralink,function = "gpio";
> > +                     };
> > +             };
> > +     };
> > +
> > +     gpio-keys-polled {
> > +             compatible = "gpio-keys-polled";
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +             poll-interval = <20>;
> > +             reset {
> > +                     label = "reset";
> > +                     gpios = <&gpio0 1 1>;
> > +                     linux,code = <0x198>;
> > +             };
> > +             wps {
> > +                     label = "wps";
> > +                     gpios = <&gpio0 2 1>;
> > +                     linux,code = <0x211>;
> > +             };
> > +     };
> > +   };
> > diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> > index 743f7b4..30d9743 100644
> > --- a/target/linux/ramips/image/Makefile
> > +++ b/target/linux/ramips/image/Makefile
> > @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
> BuildFirmware/Default16M/$(1),$(1)
> >  Image/Build/Profile/ZTE-Q7=$(call
> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
> >  Image/Build/Profile/ZBT-WA05=$(call
> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
> >  Image/Build/Profile/ArcherC20i=$(call
> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
> > +Image/Build/Profile/MicroWRT=$(call
> BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT)
> >
> >
> >  ifeq ($(SUBTARGET),mt7620)
> > @@ -895,6 +896,7 @@ define Image/Build/Profile/Default
> >       $(call Image/Build/Profile/ZTE-Q7,$(1))
> >       $(call Image/Build/Profile/ZBT-WA05,$(1))
> >       $(call Image/Build/Profile/ArcherC20i,$(1))
> > +     $(call Image/Build/Profile/MicroWRT,$(1))
> >  endef
> >  endif
> >
> > diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk
> b/target/linux/ramips/mt7620/profiles/microwrt.mk
> > new file mode 100644
> > index 0000000..e1e944b
> > --- /dev/null
> > +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk
> > @@ -0,0 +1,11 @@
> > +   define Profile/MicroWRT
> > +       NAME:=MakerModule MicroWRT
> > +       PACKAGES:=\
> > +           kmod-usb-core kmod-usb2 kmod-usb-ohci
> > +   endef
> > +
> > +   define Profile/MicroWRT/Description
> > +       Support for MicroWRT
> > +   endef
> > +   $(eval $(call Profile,MicroWRT))
> > +
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150406/76f65df9/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list