[OpenWrt-Devel] [PATCH] ramips:Add support for MakerModule MicroWRT
郭传鈜
gch981213 at gmail.com
Sun Apr 5 22:39:02 EDT 2015
Ah.... I forgot to add ' From: 盛凯 <shengkai81 at gmail.com> ' in the patch.
I think I needn't submit this patch again.but please let me know if I have
to do this:-D
2015-04-06 8:15 GMT+08:00 郭传鈜 <gch981213 at gmail.com>:
> First of all,this patch is not created by me.I just help him to send this
> patch:-D
>
> MicroWRT is an wireless router with 2 USB,1 ethernet port. It
> has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
> i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
> combine with the core board. The detailed information, please refer to
> https://www.microduino.cc/wiki/index.php?title=Main_Page
>
> This patch adds support for it.
> Because there is only one port,so disabled VLAN and use eth0 as lan
> port. and only a power LED control by power pin.
> Signed-off-by: 盛凯 <shengkai81 at gmail.com>
> ---
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/MicroWRT.dts | 107
> +++++++++++++++++++++
> target/linux/ramips/image/Makefile | 2 +
> target/linux/ramips/mt7620/profiles/microwrt.mk | 12 +++
> 6 files changed, 126 insertions(+)
> create mode 100644 target/linux/ramips/dts/MicroWRT.dts
> create mode 100644 target/linux/ramips/mt7620/profiles/microwrt.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index d4ec19d..2035ab0 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -45,6 +45,7 @@ ramips_setup_interfaces()
>
> 3g150b | \
> 3g300m | \
> + microwrt | \
> w150m | \
> zte-q7 | \
> all0256n | \
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index fc6eb37..d115b4f 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -202,6 +202,9 @@ ramips_board_detect() {
> *"Planex MZK-750DHP")
> name="mzk-750dhp"
> ;;
> + *"MakerModule MicroWRT")
> + name="microwrt"
> + ;;
> *"NBG-419N")
> name="nbg-419n"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index a5773b5..57a339e 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -60,6 +60,7 @@ platform_check_image() {
> m2m | \
> m3 | \
> m4 | \
> + microwrt | \
> mlw221 | \
> mlwg2 | \
> mofi3500-3gn | \
> diff --git a/target/linux/ramips/dts/MicroWRT.dts
> b/target/linux/ramips/dts/MicroWRT.dts
> new file mode 100644
> index 0000000..8088ccb
> --- /dev/null
> +++ b/target/linux/ramips/dts/MicroWRT.dts
> @@ -0,0 +1,107 @@
> +/dts-v1/;
> +
> +/include/ "mt7620a.dtsi"
> +
> +/ {
> + compatible = "microwrt", "ralink,mt7620a-soc";
> + model = "MakerModule MicroWRT";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + palmbus at 10000000 {
> + gpio2: gpio at 660 {
> + status = "okay";
> + };
> +
> + gpio3: gpio at 688 {
> + status = "okay";
> + };
> +
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "w25q128";
> + reg = <0 0>;
> + linux,modalias = "m25p80", "w25q128";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xfb0000>;
> + };
> + };
> + };
> + };
> +
> + ehci at 101c0000 {
> + status = "okay";
> + };
> +
> + ohci at 101c1000 {
> + status = "okay";
> + };
> +
> + pcie at 10140000 {
> + status = "okay";
> + };
> +
> + ethernet at 10100000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&ephy_pins>;
> + mtd-mac-address = <&factory 0x4>;
> + ralink,port-map = "llllw";
> + };
> +
> + wmac at 10180000 {
> + ralink,mtd-eeprom = <&factory 0>;
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + default {
> + ralink,group = "wled", "i2c", "wdt",
> "uartf";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + reset {
> + label = "reset";
> + gpios = <&gpio0 1 1>;
> + linux,code = <0x198>;
> + };
> + wps {
> + label = "wps";
> + gpios = <&gpio0 2 1>;
> + linux,code = <0x211>;
> + };
> + };
> + };
> diff --git a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile
> index 743f7b4..30d9743 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -865,6 +865,7 @@ Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call
> BuildFirmware/Default16M/$(1),$(1)
> Image/Build/Profile/ZTE-Q7=$(call
> BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
> Image/Build/Profile/ZBT-WA05=$(call
> BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
> Image/Build/Profile/ArcherC20i=$(call
> BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
> +Image/Build/Profile/MicroWRT=$(call
> BuildFirmware/Default16M/$(1),$(1),microwrt,MicroWRT)
>
>
> ifeq ($(SUBTARGET),mt7620)
> @@ -895,6 +896,7 @@ define Image/Build/Profile/Default
> $(call Image/Build/Profile/ZTE-Q7,$(1))
> $(call Image/Build/Profile/ZBT-WA05,$(1))
> $(call Image/Build/Profile/ArcherC20i,$(1))
> + $(call Image/Build/Profile/MicroWRT,$(1))
> endef
> endif
>
> diff --git a/target/linux/ramips/mt7620/profiles/microwrt.mk
> b/target/linux/ramips/mt7620/profiles/microwrt.mk
> new file mode 100644
> index 0000000..e1e944b
> --- /dev/null
> +++ b/target/linux/ramips/mt7620/profiles/microwrt.mk
> @@ -0,0 +1,11 @@
> + define Profile/MicroWRT
> + NAME:=MakerModule MicroWRT
> + PACKAGES:=\
> + kmod-usb-core kmod-usb2 kmod-usb-ohci
> + endef
> +
> + define Profile/MicroWRT/Description
> + Support for MicroWRT
> + endef
> + $(eval $(call Profile,MicroWRT))
> +
> --
> 2.1.0
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150406/39ad723e/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list