[OpenWrt-Devel] lantiq vdsl2

Joerg Hollmann Joerg.Hollmann at t-online.de
Wed Oct 29 13:34:57 EDT 2014


Hello,

may be I can help you.
I'm running an Openreach VG3505J dsl modem with BARRIER BREAKER (14.07, 
r42625) on a t-online vdsl50 connection.
I noticed, that there are many different firmwares. Tested several of 
them. The only one, that works for me is
the firmware file I extracted from Firmware_Speedport_W921V_1.20.000.bin.
I also has to modify the dsl_control script. Below you can see the 
parameter of the running prozess.

/sbin/vdsl_cpe_control -i 00_00_00_00_00_00_00_07 -n /sbin/dsl_notify.sh 
-f /lib/firmware/vdsl.bin -a /tmp/adsl.scr -A /tmp/vdsl.scr -M 2

Regards,
Jörg

there a sewveral firmwares in the wild. I tried several of them.
On 10/29/2014 04:11 PM, Daniel Golle wrote:
> Hi John,
>
> I'd love to and even got a VR9 unit, flashed it with openwrt trunk.
> During boot the vr9 dsl driver complains that it can't find the vdsl
> firmware. I tried vr9-fw-installer, but the URL referenced there no longer
> exists. Then I found http://patchwork.openwrt.org/patch/6446/
> with that applied at least the fw-cutter works and creates a dsl_fw
> filesystem which results in the two files
> /lib/firmware/lantiq/vr9_tapi_fw.bin
> /lib/firmware/lantiq/vr9_dsl_fw_annex_b.bin
> being created, the latter having a symlink /lib/firmware/vdsl.bin pointing
> to it. Then I setup /etc/config/network to use ptm and vdsl tones, and had
> to fix the status script to use vdsl_cpe_control on VR9
> https://dev.openwrt.org/changeset/43101
> But still couldn't get the box to sync...
> I also looked in forum and found that i need to load a GPL tarball from BT,
> found it on
> http://www.openreach.co.uk/orpg/home/products/super-fastfibreaccess/super-fastfibreaccess/landrgnu.do
> ("ECI Arcadyan VDSL modem")
> which luckily contained
> dsl_vr9_firmware_xdsl-05.04.06.13.01.06_05.04.02.09.01.01.tar.gz
> dsl_vr9_firmware_xdsl-05.04.07.09.01.06_05.04.04.04.01.01.tar.gz
>
> I understood that the vendor is using openwrt as their SDK and claims to be
> friendly with us. So how come there no usable fw in owrt and things are
> rather chaotic?
>
> [CC'in Thomas and Eddi, as you were submitting lantiq-related patches]
>
> Thanks for the insight
>
>
> Daniel
>
>
> On Mon, Sep 15, 2014 at 08:27:40AM +0200, John Crispin wrote:
>> Hi,
>>
>> i updated the vdsl driver after the 904 crowd reported the new driver
>> works. now i am getting reports fromt he 8970 users that the new
>> driver fails to enter showtime. can someone who has a vdsl line please
>> very the functionality ? otherwise we will revert back to the previous
>> driver revision.
>>
>> 	John
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20141029/95ab9953/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list