[OpenWrt-Devel] [PATCH] ramips: add support for A5-V11 board

John Crispin blogic at openwrt.org
Wed Oct 29 02:05:02 EDT 2014 

Hi Gareth,

the patchwork server had a hdd crash. while the disc was being
replaced, your mail arrived. hence it is not in patchwork. as i use
scripts to merge patches from patchwork, i rely on all patches being
in patchwork :)

can you resend this one please so that patchwork gets a 2nd chance at
grabbing it ? that would make my life much easier.

	John

On 28/10/2014 00:28, Gareth Bryan wrote:
> First time patch/post, have read the submitting patch guide - but
> apologies if I have made a faux pas somewhere (styling
> etiquette/etc). Pointers and/or constructive criticism welcome.
> 
> Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by
> Bococom (or at least uses Bococom image encryption - as used on
> poray devices - but different key)
> 
> Signed-off-by: Gareth Bryan <gaz at mx9.org> --- 
> target/linux/ramips/base-files/etc/board.d/01_leds |   3 + 
> .../linux/ramips/base-files/etc/board.d/02_network |   7 ++ 
> target/linux/ramips/base-files/lib/ramips.sh       |   3 + 
> .../ramips/base-files/lib/upgrade/platform.sh      |   1 + 
> target/linux/ramips/dts/A5-V11.dts                 | 117
> +++++++++++++++++++++ target/linux/ramips/image/Makefile
> |   3 + target/linux/ramips/rt305x/profiles/misc.mk        |  18
> ++++ tools/firmware-utils/src/mkporayfw.c               |   8 ++ 8
> files changed, 160 insertions(+) create mode 100644
> target/linux/ramips/dts/A5-V11.dts create mode 100644
> target/linux/ramips/rt305x/profiles/misc.mk
> 
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds index
> 7ca7ffb..4a482b3 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/01_leds +++
> b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -27,6 +27,9
> @@ case $board in 3g300m) set_usb_led "tenda:blue:3g" ;; +	a5-v11) 
> +		ucidef_set_led_default "power" "POWER" "a5-v11:red:power" "1" +
> ;; air3gii) set_wifi_led "airlive:green:wlan" set_usb_led
> "airlive:green:mobile" diff --git
> a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network index
> ff8fbc0..6510b1a 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/02_network +++
> b/target/linux/ramips/base-files/etc/board.d/02_network @@ -37,6
> +37,12 @@ ramips_setup_interfaces() ucidef_set_interface_loopback
> 
> case $board in +	a5-v11) +		ucidef_set_interface_lan "eth0.1" +
> ucidef_add_switch "switch0" "1" "1" +		ucidef_add_switch_vlan
> "switch0" "1" "0 6t" +		;; + 3g300m | \ w150m | \ all0256n | \ @@
> -252,6 +258,7 @@ ramips_setup_macs() lan_mac=$(macaddr_add
> "$lan_mac" -2) ;;
> 
> +	a5-v11 |\ bc2 |\ broadway |\ d105 |\ diff --git
> a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh index
> 88fa623..b2b299d 100755 ---
> a/target/linux/ramips/base-files/lib/ramips.sh +++
> b/target/linux/ramips/base-files/lib/ramips.sh @@ -25,6 +25,9 @@
> ramips_board_detect() { *"Edimax 3g-6200nl") name="3g-6200nl" ;; +
> *"A5-V11") +		name="a5-v11" +		;; *"Airlink101 AR725W") 
> name="ar725w" ;; diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh index
> c9a418e..4fe0ef4 100755 ---
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -17,6
> +17,7 @@ platform_check_image() { 3g-6200n | \ 3g-6200nl | \ 3g300m
> | \ +	a5-v11 | \ air3gii | \ all0239-3g | \ all0256n | \ diff --git
> a/target/linux/ramips/dts/A5-V11.dts
> b/target/linux/ramips/dts/A5-V11.dts new file mode 100644 index
> 0000000..154074a --- /dev/null +++
> b/target/linux/ramips/dts/A5-V11.dts @@ -0,0 +1,117 @@ +/dts-v1/; 
> + +/include/ "rt5350.dtsi" + +/ { +	compatible = "A5-V11",
> "ralink,rt5350-soc"; +	model = "A5-V11"; + +	palmbus at 10000000 { +
> spi at b00 { +			status = "okay"; +			m25p80 at 0 { +				#address-cells =
> <1>; +				#size-cells = <1>; +				compatible = "pm25lq032"; +
> reg = <0 0>; +				linux,modalias = "m25p80", "pm25lq032"; +
> spi-max-frequency = <10000000>; + +				partition at 0 { +					label =
> "u-boot"; +					reg = <0x0 0x30000>; +					read-only; +				}; + +
> partition at 30000 { +					label = "u-boot-env"; +					reg = <0x30000
> 0x10000>; +					read-only; +				}; + +				factory: partition at 40000
> { +					label = "factory"; +					reg = <0x40000 0x10000>; +
> read-only; +				}; + +				partition at 50000 { +					label =
> "firmware"; +					reg = <0x50000 0x3b0000>; +				}; +			}; +		}; +
> gpio1: gpio at 660 { +			status = "okay"; +		}; +	}; + +	pinctrl { +
> state_default: pinctrl0 { +			gpio { +				ralink,group = "i2c",
> "jtag", "uartf", "led"; +				ralink,function = "gpio"; +			}; +
> }; +	}; + +	ethernet at 10100000 { +		mtd-mac-address = <&factory
> 0x4>; +	}; + +	esw at 10110000 { +		ralink,portmap = <0x2f>; +	}; + +
> wmac at 10180000 { +		ralink,mtd-eeprom = <&factory 0>; +	}; + +
> ehci at 101c0000 { +		status = "okay"; +	}; + +	ohci at 101c1000 { +
> status = "okay"; +	}; + +	gpio-leds { +		compatible = "gpio-leds"; 
> +		system { +			label = "a5-v11:blue:system"; +			gpios = <&gpio0
> 20 1>; +		}; +		power { +			label = "a5-v11:red:power"; +			gpios =
> <&gpio0 17 1>; +		}; +	}; + +	gpio-keys-polled { +		compatible =
> "gpio-keys-polled"; +		#address-cells = <1>; +		#size-cells = <0>; 
> +		poll-interval = <20>; +		reset { +			label = "reset"; +			gpios
> = <&gpio0 0 1>; +			linux,code = <0x198>; +		}; +	}; + +
> gpio_export { +		compatible = "gpio-export"; +		#size-cells = <0>; 
> + +		usb { +			gpio-export,name = "usb"; +			gpio-export,output =
> <1>; +			gpios = <&gpio0 7 0>; +		}; +		root_hub { +
> gpio-export,name = "root_hub"; +			gpio-export,output = <1>; +
> gpios = <&gpio0 12 0>; +		}; +	}; +}; diff --git
> a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile index 9a47f86..584f19a 100644 
> --- a/target/linux/ramips/image/Makefile +++
> b/target/linux/ramips/image/Makefile @@ -336,6 +336,8 @@
> Image/Build/Profile/3G6200NL=$(call
> BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-
> 
> Image/Build/Profile/3G300M=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI
> Kernel Image,factory)
> 
> +Image/Build/Profile/A5-V11=$(call
> BuildFirmware/Poray4M/$(1),$(1),a5-v11,A5-V11) + 
> Image/Build/Profile/AIR3GII=$(call
> BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
> 
> define BuildFirmware/UIMAGE_8M @@ -593,6 +595,7 @@ define
> Image/Build/Profile/Default $(call
> Image/Build/Profile/3G6200N,$(1)) $(call
> Image/Build/Profile/3G6200NL,$(1)) $(call
> Image/Build/Profile/3G300M,$(1)) +	$(call
> Image/Build/Profile/A5-11,$(1)) $(call
> Image/Build/Profile/AIR3GII,$(1)) $(call
> Image/Build/Profile/ALL02393G,$(1)) $(call
> Image/Build/Profile/ALL0256N,$(1)) diff --git
> a/target/linux/ramips/rt305x/profiles/misc.mk
> b/target/linux/ramips/rt305x/profiles/misc.mk new file mode 100644 
> index 0000000..cf7db6a --- /dev/null +++
> b/target/linux/ramips/rt305x/profiles/misc.mk @@ -0,0 +1,18 @@ +# 
> +# Copyright (C) 2014 OpenWrt.org +# +# This is free software,
> licensed under the GNU General Public License v2. +# See /LICENSE
> for more information. +# + +define Profile/A5-V11 +	NAME:=A5-V11 +
> PACKAGES:=\ +		kmod-usb-core kmod-usb-ohci kmod-usb2 +endef + 
> +define Profile/A5-V11/Description +	Package set for A5-V11 +endef 
> + +$(eval $(call Profile,A5-V11)) diff --git
> a/tools/firmware-utils/src/mkporayfw.c
> b/tools/firmware-utils/src/mkporayfw.c index 8e0cf24..960c604
> 100644 --- a/tools/firmware-utils/src/mkporayfw.c +++
> b/tools/firmware-utils/src/mkporayfw.c @@ -60,6 +60,7 @@ #define
> HWID_PORAY_X1		0x38353335 #define HWID_NEXX_WT15XXX	0x30353332 
> #define HWID_NEXX_WT3020A	0x30323033 +#define HWID_A5_V11
> 0x32473352
> 
> /* Recognized XOR obfuscation keys */ #define KEY_HAME		0 @@ -69,6
> +70,7 @@ #define KEY_PORAY_4		4 #define KEY_NEXX_1		5 #define
> KEY_NEXX_2		6 +#define KEY_A5_V11		7
> 
> /* XOR key length */ #define KEY_LEN			15 @@ -123,6 +125,7 @@
> static uint8_t key[][KEY_LEN] = { {0x79, 0x7B, 0x7A, 0x93, 0x92,
> 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0xE6, 0xC7}, {0x19,
> 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63, 0xD0, 0xA3, 0x9C, 0x92,
> 0x2E, 0x16, 0xC6}, {0x39, 0x1C, 0x4A, 0x93, 0x96, 0x95, 0xC3, 0x63,
> 0xD0, 0xA3, 0x9C, 0x92, 0x2E, 0x16, 0xC6}, +  {0xC8, 0x3C, 0x3A,
> 0x93, 0xA2, 0x95, 0xC3, 0x63, 0x48, 0x45, 0x58, 0x09, 0x20, 0x11,
> 0x08}, };
> 
> static struct flash_layout layouts[] = { @@ -139,6 +142,11 @@
> static struct flash_layout layouts[] = {
> 
> static struct board_info boards[] = { { +		.id             =
> "A5-V11", +		.hw_id          = HWID_A5_V11, +		.layout_id      =
> "4M", +		.key            = KEY_A5_V11, +        }, { .id		=
> "MPR-A1", .hw_id		= HWID_HAME_MPR_A1_L8, .layout_id	= "4M", -- 
> 1.9.1 _______________________________________________ openwrt-devel
> mailing list openwrt-devel at lists.openwrt.org 
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

More information about the openwrt-devel mailing list