[OpenWrt-Devel] [PATCH] ramips: add support for Nexx WT3020 devices

[Felix Kaechele]

Am 19.10.2014 um 17:53 schrieb openwrt at rogerpueyo.com:
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index f048caf..a93b82c 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
>  Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
>  Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
>  Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
> +Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
>  Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
>  
>  ifeq ($(SUBTARGET),mt7620n)
> @@ -778,6 +779,7 @@ define Image/Build/Profile/Default
>  	$(call Image/Build/Profile/RT-N14U,$(1))
>  	$(call Image/Build/Profile/WR8305RT,$(1))
>  	$(call Image/Build/Profile/WRTNODE,$(1))
> +	$(call Image/Build/Profile/WT3020,$(1))
>  	$(call Image/Build/Profile/ZBT-WA05,$(1))
>  endef
>  endif

Have you tried building factory images for the device as well? The
mkporayfw tool has support for the WT3020A. Actually, just using the
PorayDualSize macro should work (maybe needs a change to mkporayfw to
change the board identifier from WT3020A to WT3020).

Regards,
  Felix
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel