[OpenWrt-Devel] [PATCH v2] [base-files] failsafe-mode: print short help on commandline

Bastian Bittorf bittorf at bluebottle.com
Fri Oct 17 10:38:01 EDT 2014


[base-files] failsafe-mode: print short help on commandline

Like mentioned in ticket https://dev.openwrt.org/ticket/11911
this should make the IRC much quieter. Failsafe is somehow
special and even experienced users are helpless, because they
are not used to this seldom situation. Also: likely you have
no internet access in this mode, so you cannot use the wiki.

a failsafe-session now looks like this:
first we see from 'package/base-files/files/bin/login.sh' the hint:

 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------

after this the /etc/banner ("OpenWrt - wireless freedom")
and then the new text:

================= FAILSAFE MODE active ================
special commands:
* firstboot          reset settings to factory defaults
* mount_root     mount root-partition with config files

after mount_root:
* passwd                         change root's password
* /etc/config               directory with config files

for more help see:
http://wiki.openwrt.org/doc/howto/generic.failsafe
=======================================================


this supersedes the old patches:
http://patchwork.openwrt.org/patch/3337/
http://patchwork.openwrt.org/patch/3553/

Signed-off-by: Bastian Bittorf <bittorf at bluebottle.com>
---
 package/base-files/files/etc/banner.failsafe |   13 +++++++++++++
 package/base-files/files/etc/profile         |    1 +
 2 files changed, 14 insertions(+)
 create mode 100644 package/base-files/files/etc/banner.failsafe

diff --git a/package/base-files/files/etc/banner.failsafe b/package/base-files/files/etc/banner.failsafe
new file mode 100644
index 0000000..14615e1
--- /dev/null
+++ b/package/base-files/files/etc/banner.failsafe
@@ -0,0 +1,13 @@
+================= FAILSAFE MODE active ================
+special commands:
+* firstboot	     reset settings to factory defaults
+* mount_root	 mount root-partition with config files
+
+after mount_root:
+* passwd			 change root's password
+* /etc/config		    directory with config files
+
+for more help see:
+http://wiki.openwrt.org/doc/howto/generic.failsafe
+=======================================================
+
diff --git a/package/base-files/files/etc/profile b/package/base-files/files/etc/profile
index e9a7119..3dd58e1 100644
--- a/package/base-files/files/etc/profile
+++ b/package/base-files/files/etc/profile
@@ -1,5 +1,6 @@
 #!/bin/sh
 [ -f /etc/banner ] && cat /etc/banner
+[ -e /tmp/.failsafe ] && cat /etc/banner.failsafe
 
 export PATH=/usr/bin:/usr/sbin:/bin:/sbin
 export HOME=$(grep -e "^${USER:-root}:" /etc/passwd | cut -d ":" -f 6)
-- 
1.7.10.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list