the patch does not apply anymore. can you rebase it and send it again
please ?
On 17/09/2014 13:38, openwrt at rogerpueyo.com wrote:
> From: Roger Pueyo Centelles <openwrt at rogerpueyo.com>
>
> --- target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/etc/diag.sh | 3 +
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/NEXXWT1520.dts | 83
> ++++++++++++++++++++++ target/linux/ramips/image/Makefile
> | 8 +++ target/linux/ramips/rt305x/profiles/nexx.mk | 17
> +++++ 8 files changed, 119 insertions(+) create mode 100644
> target/linux/ramips/dts/NEXXWT1520.dts create mode 100644
> target/linux/ramips/rt305x/profiles/nexx.mk
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds index
> 01e2363..1806ff2 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/01_leds +++
> b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -112,6
> +112,9 @@ case $board in hlk-rm04) set_wifi_led
> "rt2800pci-phy0::radio" ;; + nexx-wt1520) + set_wifi_led
> "rt2800pci-phy0::radio" + ;; all0239-3g|\ hw550-3g) set_usb_led
> "hw550-3g:green:usb" diff --git
> a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network index
> e027b3b..765d398 100755 ---
> a/target/linux/ramips/base-files/etc/board.d/02_network +++
> b/target/linux/ramips/base-files/etc/board.d/02_network @@ -103,6
> +103,7 @@ ramips_setup_interfaces() dir-320-b1 | \ dir-615-h1 | \
> hlk-rm04 | \ + nexx-wt1520 | \ mzk-w300nh2 | \ mzk-750dhp)
> ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" diff --git
> a/target/linux/ramips/base-files/etc/diag.sh
> b/target/linux/ramips/base-files/etc/diag.sh index 9ad7ccb..472da4b
> 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++
> b/target/linux/ramips/base-files/etc/diag.sh @@ -63,6 +63,9 @@
> get_status_led() { hlk-rm04) status_led="hlk-rm04:red:power" ;; +
> nexx-wt1520) + status_led="nexx-wt1520:white:power" + ;;
> all0239-3g|\ hw550-3g) status_led="hw550-3g:green:status" diff
> --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh index
> bb42ace..0a09225 100755 ---
> a/target/linux/ramips/base-files/lib/ramips.sh +++
> b/target/linux/ramips/base-files/lib/ramips.sh @@ -157,6 +157,9 @@
> ramips_board_detect() { *"HILINK HLK-RM04") name="hlk-rm04" ;; +
> *"Nexx WT1520") + name="nexx-wt1520" + ;; *"HAME MPR-A1")
> name="mpr-a1" ;; diff --git
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh index
> 407c218..8ff2da6 100755 ---
> a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -52,6
> +52,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ hlk-rm04
> | \ + nexx-wt1520 | \ ip2202 | \ m3 | \ m4 | \ diff --git
> a/target/linux/ramips/dts/NEXXWT1520.dts
> b/target/linux/ramips/dts/NEXXWT1520.dts new file mode 100644 index
> 0000000..dc0ad32 --- /dev/null +++
> b/target/linux/ramips/dts/NEXXWT1520.dts @@ -0,0 +1,83 @@
> +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible =
> "NEXXWT1520", "ralink,rt5350-soc"; + model = "Nexx WT1520"; + +
> memory at 0 { + device_type = "memory"; + reg = <0x0 0x2000000>; +
> }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + +
> palmbus at 10000000 { + uart at 500 { + status = "okay"; + }; + +
> spi at b00 { + status = "okay"; + m25p80 at 0 { + #address-cells =
> <1>; + #size-cells = <1>; + compatible = "w25q32"; + reg =
> <0 0>; + linux,modalias = "m25p80", "s25fl064k"; +
> spi-max-frequency = <10000000>; + + partition at 0 { + label =
> "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + +
> partition at 30000 { + label = "u-boot-env"; + reg = <0x30000
> 0x10000>; + read-only; + }; + + factory: partition at 40000
> { + label = "factory"; + reg = <0x40000 0x10000>; +
> read-only; + }; + + partition at 50000 { + label =
> "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; +
> }; + + pinctrl { + state_default: pinctrl0 { + gpio { +
> ralink,group = "jtag"; + ralink,function = "gpio"; + }; + };
> + }; + + ethernet at 10100000 { + mtd-mac-address = <&factory 0x4>; +
> }; + + wmac at 10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; +
> + ehci at 101c0000 { + status = "okay"; + }; + + ohci at 101c1000 { +
> status = "okay"; + }; +}; diff --git
> a/target/linux/ramips/image/Makefile
> b/target/linux/ramips/image/Makefile index 35057e4..fcb91af 100644
> --- a/target/linux/ramips/image/Makefile +++
> b/target/linux/ramips/image/Makefile @@ -434,6 +434,13 @@ define
> BuildFirmware/HLKRM04/initramfs endef
> Image/Build/Profile/HLKRM04=$(call
> BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
>
> +BuildFirmware/NEXXWT1520/squashfs=$(call
> BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4)) +define
> BuildFirmware/NEXXWT1520/initramfs + $(call
> BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4)) +endef +
> +Image/Build/Profile/NEXXWT1520=$(call
> BuildFirmware/NEXXWT1520/$(1),$(1),nexx-wt1520,NEXXWT1520,NEXXWT1520)
>
>
+
> Image/Build/Profile/M3=$(call
> BuildFirmware/Poray4M/$(1),$(1),m3,M3)
>
> Image/Build/Profile/M4=$(call
> BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) @@ -598,6 +605,7 @@
> define Image/Build/Profile/Default $(call
> Image/Build/Profile/FREESTATION5,$(1)) # $(call
> Image/Build/Profile/HG255D,$(1)) $(call
> Image/Build/Profile/HLKRM04,$(1)) + $(call
> Image/Build/Profile/NEXXWT1520,$(1)) $(call
> Image/Build/Profile/HW550-3G,$(1)) $(call
> Image/Build/Profile/IP2202,$(1)) $(call
> Image/Build/Profile/M3,$(1)) diff --git
> a/target/linux/ramips/rt305x/profiles/nexx.mk
> b/target/linux/ramips/rt305x/profiles/nexx.mk new file mode 100644
> index 0000000..45d81ec --- /dev/null +++
> b/target/linux/ramips/rt305x/profiles/nexx.mk @@ -0,0 +1,17 @@ +#
> +# Copyright (C) 2013 OpenWrt.org +# +# This is free software,
> licensed under the GNU General Public License v2. +# See /LICENSE
> for more information. +# + +define Profile/NEXXWT1520 + NAME:=Nexx
> WT1520 + PACKAGES:=kmod-usb2 +endef + +define
> Profile/NEXXWT1520/Description + Package set for NEXXWT1520 +endef
> + +$(eval $(call Profile,NEXXWT1520))
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel