[OpenWrt-Devel] [PATCH 4/5] add uboot-oxnas
Daniel Golle
daniel at makrotopia.org
Tue Nov 25 05:45:47 EST 2014
This adds support for the oxnas target in U-Boot 2014.04
History can be found at https://github.com/kref/u-boot-oxnas up to 2013.10
changes from 2013.10 to 2014.04 can be followed at
https://gitorious.org/openwrt-oxnas
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
package/boot/uboot-oxnas/Makefile | 97 ++
.../files/arch/arm/cpu/arm1136/nas782x/Makefile | 13 +
.../files/arch/arm/cpu/arm1136/nas782x/clock.c | 97 ++
.../files/arch/arm/cpu/arm1136/nas782x/pinmux.c | 43 +
.../files/arch/arm/cpu/arm1136/nas782x/reset.c | 91 ++
.../files/arch/arm/cpu/arm1136/nas782x/timer.c | 129 +++
.../arch/arm/include/asm/arch-nas782x/clock.h | 84 ++
.../files/arch/arm/include/asm/arch-nas782x/cpu.h | 26 +
.../arch/arm/include/asm/arch-nas782x/hardware.h | 30 +
.../arch/arm/include/asm/arch-nas782x/pinmux.h | 46 +
.../files/arch/arm/include/asm/arch-nas782x/spl.h | 6 +
.../arch/arm/include/asm/arch-nas782x/sysctl.h | 125 +++
.../arch/arm/include/asm/arch-nas782x/timer.h | 23 +
.../boot/uboot-oxnas/files/board/ox820/Makefile | 15 +
package/boot/uboot-oxnas/files/board/ox820/ddr.c | 477 ++++++++
package/boot/uboot-oxnas/files/board/ox820/ddr.h | 148 +++
.../uboot-oxnas/files/board/ox820/lowlevel_init.S | 20 +
package/boot/uboot-oxnas/files/board/ox820/ox820.c | 373 +++++++
.../boot/uboot-oxnas/files/board/ox820/spl_start.S | 21 +
.../uboot-oxnas/files/board/ox820/u-boot-spl.lds | 101 ++
package/boot/uboot-oxnas/files/common/env_ext4.c | 116 ++
.../boot/uboot-oxnas/files/common/spl/spl_block.c | 236 ++++
.../uboot-oxnas/files/drivers/block/plxsata_ide.c | 1170 ++++++++++++++++++++
.../files/drivers/usb/host/ehci-oxnas.c | 105 ++
.../boot/uboot-oxnas/files/include/configs/ox820.h | 381 +++++++
package/boot/uboot-oxnas/files/tools/mkox820crc.c | 123 ++
.../boot/uboot-oxnas/patches/150-spl-block.patch | 54 +
.../uboot-oxnas/patches/300-oxnas-target.patch | 99 ++
.../patches/800-fix-bootm-assertion.patch | 13 +
29 files changed, 4262 insertions(+)
create mode 100644 package/boot/uboot-oxnas/Makefile
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h
create mode 100644 package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/Makefile
create mode 100755 package/boot/uboot-oxnas/files/board/ox820/ddr.c
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/ddr.h
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/lowlevel_init.S
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/ox820.c
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/spl_start.S
create mode 100644 package/boot/uboot-oxnas/files/board/ox820/u-boot-spl.lds
create mode 100644 package/boot/uboot-oxnas/files/common/env_ext4.c
create mode 100644 package/boot/uboot-oxnas/files/common/spl/spl_block.c
create mode 100644 package/boot/uboot-oxnas/files/drivers/block/plxsata_ide.c
create mode 100644 package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c
create mode 100644 package/boot/uboot-oxnas/files/include/configs/ox820.h
create mode 100644 package/boot/uboot-oxnas/files/tools/mkox820crc.c
create mode 100644 package/boot/uboot-oxnas/patches/150-spl-block.patch
create mode 100644 package/boot/uboot-oxnas/patches/300-oxnas-target.patch
create mode 100644 package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch
diff --git a/package/boot/uboot-oxnas/Makefile b/package/boot/uboot-oxnas/Makefile
new file mode 100644
index 0000000..42f3cf9
--- /dev/null
+++ b/package/boot/uboot-oxnas/Makefile
@@ -0,0 +1,97 @@
+#
+# Copyright (C) 2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2014.04
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:= \
+ http://mirror2.openwrt.org/sources \
+ ftp://ftp.denx.de/pub/u-boot
+
+PKG_MD5SUM:=6d2116d1385a66e9a59742caa9d62a54
+
+include $(INCLUDE_DIR)/package.mk
+
+define uboot/Default
+ TITLE:=
+ CONFIG:=
+ IMAGE:=
+endef
+
+define uboot/ox820
+ TITLE:=U-Boot for the Oxford/PLX NAS7820
+endef
+
+UBOOTS:=ox820
+
+define Package/uboot/template
+define Package/uboot-oxnas-$(1)
+ SECTION:=boot
+ CATEGORY:=Boot Loaders
+ DEPENDS:=@TARGET_oxnas
+ TITLE:=$(2)
+ URL:=http://www.denx.de/wiki/U-Boot
+ VARIANT:=$(1)
+ MAINTAINER:=Daniel Golle <daniel at makrotopia.org>
+endef
+endef
+
+define BuildUBootPackage
+ $(eval $(uboot/Default))
+ $(eval $(uboot/$(1)))
+ $(call Package/uboot/template,$(1),$(TITLE))
+endef
+
+ifdef BUILD_VARIANT
+$(eval $(call uboot/$(BUILD_VARIANT)))
+UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
+endif
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(CP) ./files/* $(PKG_BUILD_DIR)
+ find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
+endef
+
+define Build/Configure
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ $(UBOOT_CONFIG)_config
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ u-boot.bin \
+ CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define Package/uboot/install/default
+ $(INSTALL_DIR) $(BIN_DIR)
+ $(CP) $(PKG_BUILD_DIR)/u-boot.bin \
+ $(BIN_DIR)/openwrt-$(BOARD)-$(1)-u-boot.bin
+endef
+
+define Package/uboot/install/template
+define Package/uboot-oxnas-$(1)/install
+ $(call Package/uboot/install/default,$(2))
+endef
+endef
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call Package/uboot/install/template,$(u),$(u))) \
+)
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call BuildUBootPackage,$(u))) \
+ $(eval $(call BuildPackage,uboot-oxnas-$(u))) \
+)
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile
new file mode 100644
index 0000000..4c32f5c
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += reset.o
+obj-y += timer.o
+obj-y += clock.o
+obj-y += pinmux.o
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c
new file mode 100644
index 0000000..8974ca0
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/clock.c
@@ -0,0 +1,97 @@
+#include <common.h>
+#include <asm/arch/sysctl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+typedef struct {
+ unsigned short mhz;
+ unsigned char refdiv;
+ unsigned char outdiv;
+ unsigned int fbdiv;
+ unsigned short bwadj;
+ unsigned short sfreq;
+ unsigned int sslope;
+} PLL_CONFIG;
+
+const PLL_CONFIG C_PLL_CONFIG[] = {
+ { 500, 1, 2, 3932160, 119, 208, 189 }, // 500 MHz
+ { 525, 2, 1, 4128768, 125, 139, 297 }, // 525 MHz
+ { 550, 2, 1, 4325376, 131, 139, 311 }, // 550 MHz
+ { 575, 2, 1, 4521984, 137, 139, 326 }, // 575 MHz
+ { 600, 2, 1, 4718592, 143, 138, 339 }, // 600 MHz
+ { 625, 1, 1, 3276800, 99, 208, 157 }, // 625 MHz
+ { 650, 1, 1, 3407872, 103, 208, 164 }, // 650 MHz
+ { 675, 1, 1, 3538944, 107, 208, 170 }, // 675 MHz
+ { 700, 0, 0, 917504, 27, 416, 22 }, // 700 MHz
+ { 725, 1, 1, 3801088, 115, 208, 182 }, // 725 MHz
+ { 750, 0, 0, 983040, 29, 416, 23 }, // 750 MHz
+ { 775, 3, 0, 4063232, 123, 104, 390 }, // 775 MHz
+ { 800, 3, 0, 4194304, 127, 104, 403 }, // 800 MHz
+ { 825, 3, 0, 4325376, 131, 104, 415 }, // 825 MHz
+ { 850, 2, 0, 3342336, 101, 139, 241 }, // 850 MHz
+ { 875, 2, 0, 3440640, 104, 139, 248 }, // 875 MHz
+ { 900, 2, 0, 3538944, 107, 139, 255 }, // 900 MHz
+ { 925, 2, 0, 3637248, 110, 139, 262 }, // 925 MHz
+ { 950, 2, 0, 3735552, 113, 139, 269 }, // 950 MHz
+ { 975, 2, 0, 3833856, 116, 139, 276 }, // 975 MHz
+ { 1000, 2, 0, 3932160, 119, 139, 283 }, // 1000 MHz
+};
+
+#define PLL_BYPASS (1<<1)
+#define SAT_ENABLE (1<<3)
+
+#define PLL_OUTDIV_SHIFT 4
+#define PLL_REFDIV_SHIFT 8
+#define PLL_BWADJ_SHIFT 16
+
+#define PLL_LOW_FREQ 500
+#define PLL_FREQ_STEP 25
+static void plla_configure(int outdiv, int refdiv, int fbdiv, int bwadj,
+ int sfreq, int sslope)
+{
+ setbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS);
+ udelay(10);
+ reset_block(SYS_CTRL_RST_PLLA, 1);
+ udelay(10);
+
+ writel((refdiv << PLL_REFDIV_SHIFT) | (outdiv << PLL_OUTDIV_SHIFT) |
+ SAT_ENABLE | PLL_BYPASS,
+ SYS_CTRL_PLLA_CTRL0);
+
+ writel(fbdiv, SYS_CTRL_PLLA_CTRL1);
+ writel((bwadj << PLL_BWADJ_SHIFT) | sfreq, SYS_CTRL_PLLA_CTRL2);
+ writel(sslope, SYS_CTRL_PLLA_CTRL3);
+
+ udelay(10); // 5us delay required (from TCI datasheet), use 10us
+
+ reset_block(SYS_CTRL_RST_PLLA, 0);
+
+ udelay(100); // Delay for PLL to lock
+
+ printf(" plla_ctrl0 : %08x\n", readl(SYS_CTRL_PLLA_CTRL0));
+ printf(" plla_ctrl1 : %08x\n", readl(SYS_CTRL_PLLA_CTRL1));
+ printf(" plla_ctrl2 : %08x\n", readl(SYS_CTRL_PLLA_CTRL2));
+ printf(" plla_ctrl3 : %08x\n", readl(SYS_CTRL_PLLA_CTRL3));
+
+ clrbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); // Take PLL out of bypass
+ puts("\nPLLA Set\n");
+}
+
+int plla_set_config(int mhz)
+{
+ int index = (mhz - PLL_LOW_FREQ) / PLL_FREQ_STEP;
+ const PLL_CONFIG *cfg;
+
+ if (index < 0 || index > ARRAY_SIZE(C_PLL_CONFIG)) {
+ debug("Freq %d MHz out of range, default to lowest\n", mhz);
+ index = 0;
+ }
+ cfg = &C_PLL_CONFIG[index];
+
+ printf("Attempting to set PLLA to %d MHz ...\n", (unsigned) cfg->mhz);
+ plla_configure(cfg->outdiv, cfg->refdiv, cfg->fbdiv, cfg->bwadj,
+ cfg->sfreq, cfg->sslope);
+
+ return cfg->mhz;
+}
+
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c
new file mode 100644
index 0000000..a6f5e9a
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/pinmux.c
@@ -0,0 +1,43 @@
+#include <common.h>
+#include <asm/arch/pinmux.h>
+
+void pinmux_set(int bank, int pin, int func)
+{
+ u32 reg;
+ u32 base;
+ /* TODO: check parameters */
+
+ if (bank == PINMUX_BANK_MFA)
+ base = SYS_CONTROL_BASE;
+ else
+ base = SEC_CONTROL_BASE;
+
+ clrbits_le32(base + PINMUX_SECONDARY_SEL, BIT(pin));
+ clrbits_le32(base + PINMUX_TERTIARY_SEL, BIT(pin));
+ clrbits_le32(base + PINMUX_QUATERNARY_SEL, BIT(pin));
+ clrbits_le32(base + PINMUX_DEBUG_SEL, BIT(pin));
+ clrbits_le32(base + PINMUX_ALTERNATIVE_SEL, BIT(pin));
+
+ switch (func) {
+ case PINMUX_GPIO:
+ default:
+ return;
+ break;
+ case PINMUX_2:
+ reg = base + PINMUX_SECONDARY_SEL;
+ break;
+ case PINMUX_3:
+ reg = base + PINMUX_TERTIARY_SEL;
+ break;
+ case PINMUX_4:
+ reg = base + PINMUX_QUATERNARY_SEL;
+ break;
+ case PINMUX_DEBUG:
+ reg = base + PINMUX_DEBUG_SEL;
+ break;
+ case PINMUX_ALT:
+ reg = base + PINMUX_ALTERNATIVE_SEL;
+ break;
+ }
+ setbits_le32(reg, BIT(pin));
+}
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c
new file mode 100644
index 0000000..276c912
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/reset.c
@@ -0,0 +1,91 @@
+#include <common.h>
+#include <asm/arch/sysctl.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/clock.h>
+
+void reset_cpu(ulong addr)
+{
+ u32 value;
+
+ // Assert reset to cores as per power on defaults
+ // Don't touch the DDR interface as things will come to an impromptu stop
+ // NB Possibly should be asserting reset for PLLB, but there are timing
+ // concerns here according to the docs
+
+ value =
+ BIT(SYS_CTRL_RST_COPRO ) |
+ BIT(SYS_CTRL_RST_USBHS ) |
+ BIT(SYS_CTRL_RST_USBHSPHYA ) |
+ BIT(SYS_CTRL_RST_MACA ) |
+ BIT(SYS_CTRL_RST_PCIEA ) |
+ BIT(SYS_CTRL_RST_SGDMA ) |
+ BIT(SYS_CTRL_RST_CIPHER ) |
+ BIT(SYS_CTRL_RST_SATA ) |
+ BIT(SYS_CTRL_RST_SATA_LINK ) |
+ BIT(SYS_CTRL_RST_SATA_PHY ) |
+ BIT(SYS_CTRL_RST_PCIEPHY ) |
+ BIT(SYS_CTRL_RST_STATIC ) |
+ BIT(SYS_CTRL_RST_UART1 ) |
+ BIT(SYS_CTRL_RST_UART2 ) |
+ BIT(SYS_CTRL_RST_MISC ) |
+ BIT(SYS_CTRL_RST_I2S ) |
+ BIT(SYS_CTRL_RST_SD ) |
+ BIT(SYS_CTRL_RST_MACB ) |
+ BIT(SYS_CTRL_RST_PCIEB ) |
+ BIT(SYS_CTRL_RST_VIDEO ) |
+ BIT(SYS_CTRL_RST_USBHSPHYB ) |
+ BIT(SYS_CTRL_RST_USBDEV );
+
+ writel(value, SYS_CTRL_RST_SET_CTRL);
+
+ // Release reset to cores as per power on defaults
+ writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL);
+
+ // Disable clocks to cores as per power-on defaults - must leave DDR
+ // related clocks enabled otherwise we'll stop rather abruptly.
+ value =
+ BIT(SYS_CTRL_CLK_COPRO) |
+ BIT(SYS_CTRL_CLK_DMA) |
+ BIT(SYS_CTRL_CLK_CIPHER) |
+ BIT(SYS_CTRL_CLK_SD) |
+ BIT(SYS_CTRL_CLK_SATA) |
+ BIT(SYS_CTRL_CLK_I2S) |
+ BIT(SYS_CTRL_CLK_USBHS) |
+ BIT(SYS_CTRL_CLK_MAC) |
+ BIT(SYS_CTRL_CLK_PCIEA) |
+ BIT(SYS_CTRL_CLK_STATIC) |
+ BIT(SYS_CTRL_CLK_MACB) |
+ BIT(SYS_CTRL_CLK_PCIEB) |
+ BIT(SYS_CTRL_CLK_REF600) |
+ BIT(SYS_CTRL_CLK_USBDEV);
+
+ writel(value, SYS_CTRL_CLK_CLR_CTRL);
+
+ // Enable clocks to cores as per power-on defaults
+
+ // Set sys-control pin mux'ing as per power-on defaults
+
+ writel(0, SYS_CONTROL_BASE + PINMUX_SECONDARY_SEL);
+ writel(0, SYS_CONTROL_BASE + PINMUX_TERTIARY_SEL);
+ writel(0, SYS_CONTROL_BASE + PINMUX_QUATERNARY_SEL);
+ writel(0, SYS_CONTROL_BASE + PINMUX_DEBUG_SEL);
+ writel(0, SYS_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL);
+ writel(0, SYS_CONTROL_BASE + PINMUX_PULLUP_SEL);
+
+ writel(0, SEC_CONTROL_BASE + PINMUX_SECONDARY_SEL);
+ writel(0, SEC_CONTROL_BASE + PINMUX_TERTIARY_SEL);
+ writel(0, SEC_CONTROL_BASE + PINMUX_QUATERNARY_SEL);
+ writel(0, SEC_CONTROL_BASE + PINMUX_DEBUG_SEL);
+ writel(0, SEC_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL);
+ writel(0, SEC_CONTROL_BASE + PINMUX_PULLUP_SEL);
+
+ // No need to save any state, as the ROM loader can determine whether reset
+ // is due to power cycling or programatic action, just hit the (self-
+ // clearing) CPU reset bit of the block reset register
+ value =
+ BIT(SYS_CTRL_RST_SCU) |
+ BIT(SYS_CTRL_RST_ARM0) |
+ BIT(SYS_CTRL_RST_ARM1);
+
+ writel(value, SYS_CTRL_RST_SET_CTRL);
+}
diff --git a/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c
new file mode 100644
index 0000000..5e87608
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/cpu/arm1136/nas782x/timer.c
@@ -0,0 +1,129 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments
+ * Richard Woodruff <r-woodruff2 at ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ * Alex Zuepke <azu at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (1 << (CONFIG_TIMER_PRESCALE * 4)))
+#define TIMER_LOAD_VAL 0xFFFFFF
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) \
+ / (TIMER_CLOCK / CONFIG_SYS_HZ)
+
+#define READ_TIMER_HW (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR))
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int timer_init (void)
+{
+ int32_t val;
+
+ /* Start the counter ticking up */
+ writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + TIMER_LOAD); /* reload value on overflow*/
+
+ val = (CONFIG_TIMER_PRESCALE << TIMER_PRESCALE_SHIFT) |
+ (TIMER_MODE_PERIODIC << TIMER_MODE_SHIFT) |
+ (TIMER_ENABLE << TIMER_ENABLE_SHIFT); /* mask to enable timer*/
+ writel(val, CONFIG_SYS_TIMERBASE + TIMER_CTRL); /* start timer */
+
+ /* reset time */
+ gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */
+ gd->arch.tbl = 0; /* start "advancing" time stamp */
+
+ return(0);
+}
+/*
+ * timer without interrupts
+ */
+ulong get_timer (ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+/* delay x useconds AND preserve advance timestamp value */
+void __udelay (unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ if (usec > 100000) { /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+
+ tmp = get_timer (0); /* get current timestamp */
+ while (get_timer (tmp) < tmo)/* loop till event */
+ /*NOP*/;
+ } else { /* else small number, convert to hw ticks */
+ tmo = usec * (TIMER_CLOCK / 1000) / 1000;
+ /* timeout is no more than 0.1s, and the hw timer will roll over at most once */
+ tmp = READ_TIMER_HW;
+ while (((READ_TIMER_HW -tmp) & TIMER_LOAD_VAL) < tmo)/* loop till event */
+ /*NOP*/;
+ }
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER; /* current tick value */
+
+ if (now >= gd->arch.lastinc) { /* normal mode (non roll) */
+ /* move stamp fordward with absoulte diff ticks */
+ gd->arch.tbl += (now - gd->arch.lastinc);
+ } else {
+ /* we have rollover of incrementer */
+ gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
+ - gd->arch.lastinc) + now;
+ }
+ gd->arch.lastinc = now;
+ return gd->arch.tbl;
+}
+
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+ tbclk = CONFIG_SYS_HZ;
+ return tbclk;
+}
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h
new file mode 100644
index 0000000..da7dd1c
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/clock.h
@@ -0,0 +1,84 @@
+#ifndef _NAS782X_CLOCK_H
+#define _NAS782X_CLOCK_H
+
+#include <asm/arch/sysctl.h>
+#include <asm/arch/cpu.h>
+
+/* bit numbers of clock control register */
+#define SYS_CTRL_CLK_COPRO 0
+#define SYS_CTRL_CLK_DMA 1
+#define SYS_CTRL_CLK_CIPHER 2
+#define SYS_CTRL_CLK_SD 3
+#define SYS_CTRL_CLK_SATA 4
+#define SYS_CTRL_CLK_I2S 5
+#define SYS_CTRL_CLK_USBHS 6
+#define SYS_CTRL_CLK_MACA 7
+#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
+#define SYS_CTRL_CLK_PCIEA 8
+#define SYS_CTRL_CLK_STATIC 9
+#define SYS_CTRL_CLK_MACB 10
+#define SYS_CTRL_CLK_PCIEB 11
+#define SYS_CTRL_CLK_REF600 12
+#define SYS_CTRL_CLK_USBDEV 13
+#define SYS_CTRL_CLK_DDR 14
+#define SYS_CTRL_CLK_DDRPHY 15
+#define SYS_CTRL_CLK_DDRCK 16
+
+/* bit numbers of reset control register */
+#define SYS_CTRL_RST_SCU 0
+#define SYS_CTRL_RST_COPRO 1
+#define SYS_CTRL_RST_ARM0 2
+#define SYS_CTRL_RST_ARM1 3
+#define SYS_CTRL_RST_USBHS 4
+#define SYS_CTRL_RST_USBHSPHYA 5
+#define SYS_CTRL_RST_MACA 6
+#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
+#define SYS_CTRL_RST_PCIEA 7
+#define SYS_CTRL_RST_SGDMA 8
+#define SYS_CTRL_RST_CIPHER 9
+#define SYS_CTRL_RST_DDR 10
+#define SYS_CTRL_RST_SATA 11
+#define SYS_CTRL_RST_SATA_LINK 12
+#define SYS_CTRL_RST_SATA_PHY 13
+#define SYS_CTRL_RST_PCIEPHY 14
+#define SYS_CTRL_RST_STATIC 15
+#define SYS_CTRL_RST_GPIO 16
+#define SYS_CTRL_RST_UART1 17
+#define SYS_CTRL_RST_UART2 18
+#define SYS_CTRL_RST_MISC 19
+#define SYS_CTRL_RST_I2S 20
+#define SYS_CTRL_RST_SD 21
+#define SYS_CTRL_RST_MACB 22
+#define SYS_CTRL_RST_PCIEB 23
+#define SYS_CTRL_RST_VIDEO 24
+#define SYS_CTRL_RST_DDR_PHY 25
+#define SYS_CTRL_RST_USBHSPHYB 26
+#define SYS_CTRL_RST_USBDEV 27
+#define SYS_CTRL_RST_ARMDBG 29
+#define SYS_CTRL_RST_PLLA 30
+#define SYS_CTRL_RST_PLLB 31
+
+static inline void reset_block(int block, int reset)
+{
+ u32 reg;
+ if (reset)
+ reg = SYS_CTRL_RST_SET_CTRL;
+ else
+ reg = SYS_CTRL_RST_CLR_CTRL;
+
+ writel(BIT(block), reg);
+}
+
+static inline void enable_clock(int block)
+{
+ writel(BIT(block), SYS_CTRL_CLK_SET_CTRL);
+}
+
+static inline void disable_clock(int block)
+{
+ writel(BIT(block), SYS_CTRL_CLK_CLR_CTRL);
+}
+
+int plla_set_config(int idx);
+
+#endif /* _NAS782X_CLOCK_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h
new file mode 100644
index 0000000..11e803c
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/cpu.h
@@ -0,0 +1,26 @@
+#ifndef _NAS782X_CPU_H
+#define _NAS782X_CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#include <asm/io.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/timer.h>
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+
+#define BIT(x) (1 << (x))
+
+/* fix "implicit declaration of function" warnning */
+void *memalign(size_t alignment, size_t bytes);
+void free(void* mem);
+void *malloc(size_t bytes);
+void *calloc(size_t n, size_t elem_size);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#endif /* _NAS782X_CPU_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h
new file mode 100644
index 0000000..f26b17f
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/hardware.h
@@ -0,0 +1,30 @@
+#ifndef _NAS782X_HARDWARE_H
+#define _NAS782X_HARDWARE_H
+
+/* Core addresses */
+#define USB_HOST_BASE 0x40200000
+#define MACA_BASE 0x40400000
+#define MACB_BASE 0x40800000
+#define MAC_BASE MACA_BASE
+#define STATIC_CS0_BASE 0x41000000
+#define STATIC_CS1_BASE 0x41400000
+#define STATIC_CONTROL_BASE 0x41C00000
+#define SATA_DATA_BASE 0x42000000 /* non-functional, DMA just needs an address */
+#define GPIO_1_BASE 0x44000000
+#define GPIO_2_BASE 0x44100000
+#define UART_1_BASE 0x44200000
+#define UART_2_BASE 0x44300000
+#define SYS_CONTROL_BASE 0x44e00000
+#define SEC_CONTROL_BASE 0x44f00000
+#define RPSA_BASE 0x44400000
+#define RPSC_BASE 0x44500000
+#define DDR_BASE 0x44700000
+
+#define SATA_BASE 0x45900000
+#define SATA_0_REGS_BASE 0x45900000
+#define SATA_1_REGS_BASE 0x45910000
+#define SATA_DMA_REGS_BASE 0x459a0000
+#define SATA_SGDMA_REGS_BASE 0x459b0000
+#define SATA_HOST_REGS_BASE 0x459e0000
+
+#endif /* _NAS782X_HARDWARE_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h
new file mode 100644
index 0000000..810ba5c
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/pinmux.h
@@ -0,0 +1,46 @@
+#ifndef _NAS782X_PINMUX_H
+#define _NAS782X_PINMUX_H
+
+#include <asm/arch/cpu.h>
+
+#define PINMUX_GPIO 0
+#define PINMUX_2 1
+#define PINMUX_3 2
+#define PINMUX_4 3
+#define PINMUX_DEBUG 4
+#define PINMUX_ALT 5
+
+#define PINMUX_BANK_MFA 0
+#define PINMUX_BANK_MFB 1
+
+/* System control multi-function pin function selection */
+#define PINMUX_SECONDARY_SEL 0x14
+#define PINMUX_TERTIARY_SEL 0x8c
+#define PINMUX_QUATERNARY_SEL 0x94
+#define PINMUX_DEBUG_SEL 0x9c
+#define PINMUX_ALTERNATIVE_SEL 0xa4
+#define PINMUX_PULLUP_SEL 0xac
+
+#define PINMUX_UARTA_SIN PINMUX_ALT
+#define PINMUX_UARTA_SOUT PINMUX_ALT
+
+#define PINMUX_STATIC_DATA0 PINMUX_2
+#define PINMUX_STATIC_DATA1 PINMUX_2
+#define PINMUX_STATIC_DATA2 PINMUX_2
+#define PINMUX_STATIC_DATA3 PINMUX_2
+#define PINMUX_STATIC_DATA4 PINMUX_2
+#define PINMUX_STATIC_DATA5 PINMUX_2
+#define PINMUX_STATIC_DATA6 PINMUX_2
+#define PINMUX_STATIC_DATA7 PINMUX_2
+#define PINMUX_STATIC_NWE PINMUX_2
+#define PINMUX_STATIC_NOE PINMUX_2
+#define PINMUX_STATIC_NCS PINMUX_2
+#define PINMUX_STATIC_ADDR18 PINMUX_2
+#define PINMUX_STATIC_ADDR19 PINMUX_2
+
+#define PINMUX_MACA_MDC PINMUX_2
+#define PINMUX_MACA_MDIO PINMUX_2
+
+extern void pinmux_set(int bank, int pin, int func);
+
+#endif /* _NAS782X_PINMUX_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h
new file mode 100644
index 0000000..f73afda
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/spl.h
@@ -0,0 +1,6 @@
+#ifndef _NAS782X_SPL_H
+#define _NAS782X_SPL_H
+
+#include <asm/arch/cpu.h>
+
+#endif /* _NAS782X_SPL_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h
new file mode 100644
index 0000000..3867e45
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/sysctl.h
@@ -0,0 +1,125 @@
+#ifndef _NAS782X_SYSCTL_H
+#define _NAS782X_SYSCTL_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#include <asm/arch/hardware.h>
+
+/**
+ * System block reset and clock control
+ */
+#define SYS_CTRL_PCI_STAT (SYS_CONTROL_BASE + 0x20)
+#define SYS_CTRL_CLK_SET_CTRL (SYS_CONTROL_BASE + 0x2C)
+#define SYS_CTRL_CLK_CLR_CTRL (SYS_CONTROL_BASE + 0x30)
+#define SYS_CTRL_RST_SET_CTRL (SYS_CONTROL_BASE + 0x34)
+#define SYS_CTRL_RST_CLR_CTRL (SYS_CONTROL_BASE + 0x38)
+#define SYS_CTRL_PLLSYS_CTRL (SYS_CONTROL_BASE + 0x48)
+#define SYS_CTRL_PLLSYS_KEY_CTRL (SYS_CONTROL_BASE + 0x6C)
+#define SYS_CTRL_GMAC_CTRL (SYS_CONTROL_BASE + 0x78)
+
+/* Scratch registers */
+#define SYS_CTRL_SCRATCHWORD0 (SYS_CONTROL_BASE + 0xc4)
+#define SYS_CTRL_SCRATCHWORD1 (SYS_CONTROL_BASE + 0xc8)
+#define SYS_CTRL_SCRATCHWORD2 (SYS_CONTROL_BASE + 0xcc)
+#define SYS_CTRL_SCRATCHWORD3 (SYS_CONTROL_BASE + 0xd0)
+
+#define SYS_CTRL_PLLA_CTRL0 (SYS_CONTROL_BASE + 0x1F0)
+#define SYS_CTRL_PLLA_CTRL1 (SYS_CONTROL_BASE + 0x1F4)
+#define SYS_CTRL_PLLA_CTRL2 (SYS_CONTROL_BASE + 0x1F8)
+#define SYS_CTRL_PLLA_CTRL3 (SYS_CONTROL_BASE + 0x1FC)
+
+#define SYS_CTRL_GMAC_AUTOSPEED 3
+#define SYS_CTRL_GMAC_RGMII 2
+#define SYS_CTRL_GMAC_SIMPLE_MUX 1
+#define SYS_CTRL_GMAC_CKEN_GTX 0
+
+#define SYS_CTRL_CKCTRL_CTRL_ADDR (SYS_CONTROL_BASE + 0x64)
+
+#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
+#define SYS_CTRL_CKCTRL_SLOW_BIT 8
+
+
+#define SYS_CTRL_USBHSMPH_CTRL (SYS_CONTROL_BASE + 0x40)
+#define SYS_CTRL_USBHSMPH_STAT (SYS_CONTROL_BASE + 0x44)
+#define SYS_CTRL_REF300_DIV (SYS_CONTROL_BASE + 0xF8)
+#define SYS_CTRL_USBHSPHY_CTRL (SYS_CONTROL_BASE + 0x84)
+#define SYS_CTRL_USB_CTRL (SYS_CONTROL_BASE + 0x90)
+
+/* System control multi-function pin function selection */
+#define SYS_CTRL_SECONDARY_SEL (SYS_CONTROL_BASE + 0x14)
+#define SYS_CTRL_TERTIARY_SEL (SYS_CONTROL_BASE + 0x8c)
+#define SYS_CTRL_QUATERNARY_SEL (SYS_CONTROL_BASE + 0x94)
+#define SYS_CTRL_DEBUG_SEL (SYS_CONTROL_BASE + 0x9c)
+#define SYS_CTRL_ALTERNATIVE_SEL (SYS_CONTROL_BASE + 0xa4)
+#define SYS_CTRL_PULLUP_SEL (SYS_CONTROL_BASE + 0xac)
+
+/* Secure control multi-function pin function selection */
+#define SEC_CTRL_SECONDARY_SEL (SEC_CONTROL_BASE + 0x14)
+#define SEC_CTRL_TERTIARY_SEL (SEC_CONTROL_BASE + 0x8c)
+#define SEC_CTRL_QUATERNARY_SEL (SEC_CONTROL_BASE + 0x94)
+#define SEC_CTRL_DEBUG_SEL (SEC_CONTROL_BASE + 0x9c)
+#define SEC_CTRL_ALTERNATIVE_SEL (SEC_CONTROL_BASE + 0xa4)
+#define SEC_CTRL_PULLUP_SEL (SEC_CONTROL_BASE + 0xac)
+
+#define SEC_CTRL_COPRO_CTRL (SEC_CONTROL_BASE + 0x68)
+#define SEC_CTRL_SECURE_CTRL (SEC_CONTROL_BASE + 0x98)
+#define SEC_CTRL_LEON_DEBUG (SEC_CONTROL_BASE + 0xF0)
+#define SEC_CTRL_PLLB_DIV_CTRL (SEC_CONTROL_BASE + 0xF8)
+#define SEC_CTRL_PLLB_CTRL0 (SEC_CONTROL_BASE + 0x1F0)
+#define SEC_CTRL_PLLB_CTRL1 (SEC_CONTROL_BASE + 0x1F4)
+#define SEC_CTRL_PLLB_CTRL8 (SEC_CONTROL_BASE + 0x1F4)
+
+#define REF300_DIV_INT_SHIFT 8
+#define REF300_DIV_FRAC_SHIFT 0
+#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
+#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
+
+#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
+#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
+#define USBHSPHY_ATE_ESET 14
+#define USBHSPHY_TEST_DIN 6
+#define USBHSPHY_TEST_ADD 2
+#define USBHSPHY_TEST_DOUT_SEL 1
+#define USBHSPHY_TEST_CLK 0
+
+#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
+#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
+
+#define USBAMUX_DEVICE BIT(4)
+
+#define USBPHY_REFCLKDIV_SHIFT 2
+#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
+#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
+
+#define USB_CTRL_USB_CKO_SEL_BIT 0
+
+#define USB_INT_CLK_XTAL 0
+#define USB_INT_CLK_REF300 2
+#define USB_INT_CLK_PLLB 3
+
+#define SYS_CTRL_GMAC_AUTOSPEED 3
+#define SYS_CTRL_GMAC_RGMII 2
+#define SYS_CTRL_GMAC_SIMPLE_MUX 1
+#define SYS_CTRL_GMAC_CKEN_GTX 0
+
+
+#define PLLB_ENSAT 3
+#define PLLB_OUTDIV 4
+#define PLLB_REFDIV 8
+#define PLLB_DIV_INT_SHIFT 8
+#define PLLB_DIV_FRAC_SHIFT 0
+#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
+#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#endif /* _NAS782X_SYSCTL_H */
diff --git a/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h
new file mode 100644
index 0000000..ea4d71e
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/arch/arm/include/asm/arch-nas782x/timer.h
@@ -0,0 +1,23 @@
+#ifndef _NAS782X_TIMER_H
+#define _NAS782X_TIMER_H
+
+#define TIMER1_BASE (RPSA_BASE + 0x200)
+#define TIMER2_BASE (RPSA_BASE + 0x220)
+
+#define TIMER_LOAD 0
+#define TIMER_CURR 4
+#define TIMER_CTRL 8
+#define TIMER_INTR 0x0C
+
+#define TIMER_PRESCALE_SHIFT 2
+#define TIMER_PRESCALE_1 0
+#define TIMER_PRESCALE_16 1
+#define TIMER_PRESCALE_256 2
+#define TIMER_MODE_SHIFT 6
+#define TIMER_MODE_FREE_RUNNING 0
+#define TIMER_MODE_PERIODIC 1
+#define TIMER_ENABLE_SHIFT 7
+#define TIMER_DISABLE 0
+#define TIMER_ENABLE 1
+
+#endif /* _NAS782X_TIMER_H */
diff --git a/package/boot/uboot-oxnas/files/board/ox820/Makefile b/package/boot/uboot-oxnas/files/board/ox820/Makefile
new file mode 100644
index 0000000..445fc4c
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/Makefile
@@ -0,0 +1,15 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ox820.o
+obj-y += lowlevel_init.o
+
+obj-$(CONFIG_SPL_BUILD) += spl_start.o
+obj-$(CONFIG_SPL_BUILD) += ddr.o
+
diff --git a/package/boot/uboot-oxnas/files/board/ox820/ddr.c b/package/boot/uboot-oxnas/files/board/ox820/ddr.c
new file mode 100755
index 0000000..a665722
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/ddr.c
@@ -0,0 +1,477 @@
+/*******************************************************************
+ *
+ * File: ddr_oxsemi.c
+ *
+ * Description: Declarations for DDR routines and data objects
+ *
+ * Author: Julien Margetts
+ *
+ * Copyright: Oxford Semiconductor Ltd, 2009
+ */
+#include <common.h>
+#include <asm/arch/clock.h>
+
+#include "ddr.h"
+
+typedef unsigned int UINT;
+
+// DDR TIMING PARAMETERS
+typedef struct {
+ unsigned int holdoff_cmd_A;
+ unsigned int holdoff_cmd_ARW;
+ unsigned int holdoff_cmd_N;
+ unsigned int holdoff_cmd_LM;
+ unsigned int holdoff_cmd_R;
+ unsigned int holdoff_cmd_W;
+ unsigned int holdoff_cmd_PC;
+ unsigned int holdoff_cmd_RF;
+ unsigned int holdoff_bank_R;
+ unsigned int holdoff_bank_W;
+ unsigned int holdoff_dir_RW;
+ unsigned int holdoff_dir_WR;
+ unsigned int holdoff_FAW;
+ unsigned int latency_CAS;
+ unsigned int latency_WL;
+ unsigned int recovery_WR;
+ unsigned int width_update;
+ unsigned int odt_offset;
+ unsigned int odt_drive_all;
+ unsigned int use_fixed_re;
+ unsigned int delay_wr_to_re;
+ unsigned int wr_slave_ratio;
+ unsigned int rd_slave_ratio0;
+ unsigned int rd_slave_ratio1;
+} T_DDR_TIMING_PARAMETERS;
+
+// DDR CONFIG PARAMETERS
+
+typedef struct {
+ unsigned int ddr_mode;
+ unsigned int width;
+ unsigned int blocs;
+ unsigned int banks8;
+ unsigned int rams;
+ unsigned int asize;
+ unsigned int speed;
+ unsigned int cmd_mode_wr_cl_bl;
+} T_DDR_CONFIG_PARAMETERS;
+
+//cmd_mode_wr_cl_bl
+//when SDR : cmd_mode_wr_cl_bl = 0x80200002 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8
+//else cmd_mode_wr_cl_bl = 0x80200003 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8
+
+// cmd_ bank_ dir_ lat_ rec_ width_ odt_ odt_ fix delay ratio
+// A F C update offset all re re_to_we w r0 r1
+// R L P R R W A A W W
+//Timing Parameters A W N M R W C F R W W R W S L R
+static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_1GB = { 4, 5, 0, 2, 4, 4,
+ 5, 51, 23, 24, 9, 11, 18, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; //elida device.
+static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_2GB = { 4, 5, 0, 2, 4, 4,
+ 5, 79, 22, 24, 9, 11, 20, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 };
+static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25_CL6_1GB = { 4, 5, 0, 2, 4, 4,
+ 4, 51, 22, 26, 10, 12, 18, 6, 5, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; // 400MHz, Speedgrade 25 timings (1Gb parts)
+
+// D B B R A S
+// D W L K A S P
+//Config Parameters R D C 8 M Z D CMD_MODE
+//static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2,16, 1, 0, 1, 32,25,0x80200A53}; // 64 MByte
+static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2, 16, 1, 1, 1, 64,
+ 25, 0x80200A53 }; // 128 MByte
+static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25_CL6 = { 2, 16, 1, 1, 1, 128,
+ 25, 0x80200A63 }; // 256 MByte
+
+static void ddr_phy_poll_until_locked(void)
+{
+ volatile UINT reg_tmp = 0;
+ volatile UINT locked = 0;
+
+ //Extra read to put in delay before starting to poll...
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
+
+ //POLL C_DDR_PHY2_REG register until clock and flock
+ //!!! Ideally have a timeout on this.
+ while (locked == 0) {
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
+
+ //locked when bits 30 and 31 are set
+ if (reg_tmp & 0xC0000000) {
+ locked = 1;
+ }
+ }
+}
+
+static void ddr_poll_until_not_busy(void)
+{
+ volatile UINT reg_tmp = 0;
+ volatile UINT busy = 1;
+
+ //Extra read to put in delay before starting to poll...
+ reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read
+
+ //POLL DDR_STAT register until no longer busy
+ //!!! Ideally have a timeout on this.
+ while (busy == 1) {
+ reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read
+
+ //when bit 31 is clear - core is no longer busy
+ if ((reg_tmp & 0x80000000) == 0x00000000) {
+ busy = 0;
+ }
+ }
+}
+
+static void ddr_issue_command(int commmand)
+{
+ *(volatile UINT *) C_DDR_CMD_REG = commmand;
+ ddr_poll_until_not_busy();
+}
+
+static void ddr_timing_initialisation(
+ const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters)
+{
+ volatile UINT reg_tmp = 0;
+ /* update the DDR controller registers for timing parameters */
+ reg_tmp = (ddr_timing_parameters->holdoff_cmd_A << 0);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_ARW << 4);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_N << 8);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_LM << 12);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_R << 16);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_W << 20);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_PC << 24);
+ *(volatile UINT *) C_DDR_REG_TIMING0 = reg_tmp;
+
+ reg_tmp = (ddr_timing_parameters->holdoff_cmd_RF << 0);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_R << 8);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_W << 16);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_RW << 24);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_WR << 28);
+ *(volatile UINT *) C_DDR_REG_TIMING1 = reg_tmp;
+
+ reg_tmp = (ddr_timing_parameters->latency_CAS << 0);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->latency_WL << 4);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_FAW << 8);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->width_update << 16);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->odt_offset << 21);
+ reg_tmp = reg_tmp + (ddr_timing_parameters->odt_drive_all << 24);
+
+ *(volatile UINT *) C_DDR_REG_TIMING2 = reg_tmp;
+
+ /* Program the timing parameters in the PHY too */
+ reg_tmp = (ddr_timing_parameters->use_fixed_re << 16)
+ | (ddr_timing_parameters->delay_wr_to_re << 8)
+ | (ddr_timing_parameters->latency_WL << 4)
+ | (ddr_timing_parameters->latency_CAS << 0);
+
+ *(volatile UINT *) C_DDR_REG_PHY_TIMING = reg_tmp;
+
+ reg_tmp = ddr_timing_parameters->wr_slave_ratio;
+
+ *(volatile UINT *) C_DDR_REG_PHY_WR_RATIO = reg_tmp;
+
+ reg_tmp = ddr_timing_parameters->rd_slave_ratio0;
+ reg_tmp += ddr_timing_parameters->rd_slave_ratio1 << 8;
+
+ *(volatile UINT *) C_DDR_REG_PHY_RD_RATIO = reg_tmp;
+
+}
+
+static void ddr_normal_initialisation(
+ const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters, int mhz)
+{
+ int i;
+ volatile UINT tmp = 0;
+ volatile UINT reg_tmp = 0;
+ volatile UINT emr_cmd = 0;
+ UINT refresh;
+
+ //Total size of memory in Mbits...
+ tmp = ddr_config_parameters->rams * ddr_config_parameters->asize
+ * ddr_config_parameters->width;
+ //Deduce value to program into DDR_CFG register...
+ switch (tmp) {
+ case 16:
+ reg_tmp = 0x00020000 * 1;
+ break;
+ case 32:
+ reg_tmp = 0x00020000 * 2;
+ break;
+ case 64:
+ reg_tmp = 0x00020000 * 3;
+ break;
+ case 128:
+ reg_tmp = 0x00020000 * 4;
+ break;
+ case 256:
+ reg_tmp = 0x00020000 * 5;
+ break;
+ case 512:
+ reg_tmp = 0x00020000 * 6;
+ break;
+ case 1024:
+ reg_tmp = 0x00020000 * 7;
+ break;
+ case 2048:
+ reg_tmp = 0x00020000 * 8;
+ break;
+ default:
+ reg_tmp = 0; //forces sims not to work if badly configured
+ }
+
+ //Memory width
+ tmp = ddr_config_parameters->rams * ddr_config_parameters->width;
+ switch (tmp) {
+ case 8:
+ reg_tmp = reg_tmp + 0x00400000;
+ break;
+ case 16:
+ reg_tmp = reg_tmp + 0x00200000;
+ break;
+ case 32:
+ reg_tmp = reg_tmp + 0x00000000;
+ break;
+ default:
+ reg_tmp = 0; //forces sims not to work if badly configured
+ }
+
+ //Setup DDR Mode
+ switch (ddr_config_parameters->ddr_mode) {
+ case 0:
+ reg_tmp = reg_tmp + 0x00000000;
+ break; //SDR
+ case 1:
+ reg_tmp = reg_tmp + 0x40000000;
+ break; //DDR
+ case 2:
+ reg_tmp = reg_tmp + 0x80000000;
+ break; //DDR2
+ default:
+ reg_tmp = 0; //forces sims not to work if badly configured
+ }
+
+ //Setup Banks
+ if (ddr_config_parameters->banks8 == 1) {
+ reg_tmp = reg_tmp + 0x00800000;
+ }
+
+ //Program DDR_CFG register...
+ *(volatile UINT *) C_DDR_CFG_REG = reg_tmp;
+
+ //Configure PHY0 reg - se_mode is bit 1,
+ //needs to be 1 for DDR (single_ended drive)
+ switch (ddr_config_parameters->ddr_mode) {
+ case 0:
+ reg_tmp = 2 + (0 << 4);
+ break; //SDR
+ case 1:
+ reg_tmp = 2 + (4 << 4);
+ break; //DDR
+ case 2:
+ reg_tmp = 0 + (4 << 4);
+ break; //DDR2
+ default:
+ reg_tmp = 0;
+ }
+
+ //Program DDR_PHY0 register...
+ *(volatile UINT *) C_DDR_REG_PHY0 = reg_tmp;
+
+ //Read DDR_PHY* registers to exercise paths for vcd
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY3;
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2;
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY1;
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY0;
+
+ //Start up sequences - Different dependant on DDR mode
+ switch (ddr_config_parameters->ddr_mode) {
+ case 2: //DDR2
+ //Start-up sequence: follows procedure described in Micron datasheet.
+ //start up DDR PHY DLL
+ reg_tmp = 0x00022828; // dll on, start point and inc = h28
+ *(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp;
+
+ reg_tmp = 0x00032828; // start on, dll on, start point and inc = h28
+ *(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp;
+
+ ddr_phy_poll_until_locked();
+
+ udelay(200); //200us
+
+ //Startup SDRAM...
+ //!!! Software: CK should be running for 200us before wake-up
+ ddr_issue_command( C_CMD_WAKE_UP);
+ ddr_issue_command( C_CMD_NOP);
+ ddr_issue_command( C_CMD_PRECHARGE_ALL);
+ ddr_issue_command( C_CMD_DDR2_EMR2);
+ ddr_issue_command( C_CMD_DDR2_EMR3);
+
+ emr_cmd = C_CMD_DDR2_EMR1 + C_CMD_ODT_75 + C_CMD_REDUCED_DRIVE
+ + C_CMD_ENABLE_DLL;
+
+ ddr_issue_command(emr_cmd);
+ //Sets CL=3; BL=8 but also reset DLL to trigger a DLL initialisation...
+ udelay(1); //1us
+ ddr_issue_command(
+ ddr_config_parameters->cmd_mode_wr_cl_bl
+ + C_CMD_RESET_DLL);
+ udelay(1); //1us
+
+ //!!! Software: Wait 200 CK cycles before...
+ //for(i=1; i<=2; i++) {
+ ddr_issue_command(C_CMD_PRECHARGE_ALL);
+ // !!! Software: Wait here at least 8 CK cycles
+ //}
+ //need a wait here to ensure PHY DLL lock before the refresh is issued
+ udelay(1); //1us
+ for (i = 1; i <= 2; i++) {
+ ddr_issue_command( C_CMD_AUTO_REFRESH);
+ //!!! Software: Wait here at least 8 CK cycles to satify tRFC
+ udelay(1); //1us
+ }
+ //As before but without 'RESET_DLL' bit set...
+ ddr_issue_command(ddr_config_parameters->cmd_mode_wr_cl_bl);
+ udelay(1); //1us
+ // OCD commands
+ ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_DFLT);
+ ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_EXIT);
+ break;
+
+ default:
+ break; //Do nothing
+ }
+
+ //Enable auto-refresh
+
+ // 8192 Refreshes required every 64ms, so maximum refresh period is 7.8125 us
+ // We have a 400 MHz DDR clock (2.5ns period) so max period is 3125 cycles
+ // Our core now does 8 refreshes in a go, so we multiply this period by 8
+
+ refresh = (64000 * mhz) / 8192; // Refresh period in clocks
+
+ reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read
+#ifdef BURST_REFRESH_ENABLE
+ reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 8);
+ reg_tmp |= C_CFG_BURST_REFRESH_ENABLE;
+#else
+ reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 1);
+ reg_tmp &= ~C_CFG_BURST_REFRESH_ENABLE;
+#endif
+ *(volatile UINT *) C_DDR_CFG_REG = reg_tmp;
+
+ //Verify register contents
+ reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read
+ //printf("Warning XXXXXXXXXXXXXXXXXXXXXX - get bad read data from C_DDR_PHY2_REG, though it looks OK on bus XXXXXXXXXXXXXXXXXX");
+ //TBD Check_data (read_data, dll_reg, "Error: bad C_DDR_PHY2_REG read", tb_pass);
+ reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read
+ //TBD Check_data (read_data, cfg_reg, "Error: bad DDR_CFG read", tb_pass);
+
+ //disable optimised wrapping
+ if (ddr_config_parameters->ddr_mode == 2) {
+ reg_tmp = 0xFFFF0000;
+ *(volatile UINT *) C_DDR_REG_IGNORE = reg_tmp;
+ }
+
+ //enable midbuffer followon
+ reg_tmp = *(volatile UINT *) C_DDR_ARB_REG; // read
+ reg_tmp = 0xFFFF0000 | reg_tmp;
+ *(volatile UINT *) C_DDR_ARB_REG = reg_tmp;
+
+ // Enable write behind coherency checking for all clients
+
+ reg_tmp = 0xFFFF0000;
+ *(volatile UINT *) C_DDR_AHB4_REG = reg_tmp;
+
+ //Wait for 200 clock cycles for SDRAM DLL to lock...
+ udelay(1); //1us
+}
+
+// Function used to Setup DDR core
+
+void ddr_setup(int mhz)
+{
+ static const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters =
+ &C_TP_DDR2_25_CL6_1GB;
+ static const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters =
+ &C_CP_DDR2_25_CL6;
+
+ //Bring core out of Reset
+ *(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON;
+
+ //DDR TIMING INITIALISTION
+ ddr_timing_initialisation(ddr_timing_parameters);
+
+ //DDR NORMAL INITIALISATION
+ ddr_normal_initialisation(ddr_config_parameters, mhz);
+
+ // route all writes through one client
+ *(volatile UINT *) C_DDR_TRANSACTION_ROUTING = (0
+ << DDR_ROUTE_CPU0_INSTR_SHIFT)
+ | (1 << DDR_ROUTE_CPU0_RDDATA_SHIFT)
+ | (3 << DDR_ROUTE_CPU0_WRDATA_SHIFT)
+ | (2 << DDR_ROUTE_CPU1_INSTR_SHIFT)
+ | (3 << DDR_ROUTE_CPU1_RDDATA_SHIFT)
+ | (3 << DDR_ROUTE_CPU1_WRDATA_SHIFT);
+
+ //Bring all clients out of reset
+ *(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON + 0x0000FFFF;
+
+}
+
+void set_ddr_timing(unsigned int w, unsigned int i)
+{
+ unsigned int reg;
+ unsigned int wnow = 16;
+ unsigned int inow = 32;
+
+ /* reset all timing controls to known value (31) */
+ writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST | DDR_PHY_TIMING_CK,
+ DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING);
+
+ /* step up or down read delay to the requested value */
+ while (wnow != w) {
+ if (wnow < w) {
+ reg = DDR_PHY_TIMING_INC;
+ wnow++;
+ } else {
+ reg = 0;
+ wnow--;
+ }
+ writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_W_CE | reg,
+ DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING);
+ }
+
+ /* now write delay */
+ while (inow != i) {
+ if (inow < i) {
+ reg = DDR_PHY_TIMING_INC;
+ inow++;
+ } else {
+ reg = 0;
+ inow--;
+ }
+ writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_I_CE | reg,
+ DDR_PHY_TIMING);
+ writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING);
+ }
+}
+
+//Function used to Setup SDRAM in DDR/SDR mode
+void init_ddr(int mhz)
+{
+ /* start clocks */
+ enable_clock(SYS_CTRL_CLK_DDRPHY);
+ enable_clock(SYS_CTRL_CLK_DDR);
+ enable_clock(SYS_CTRL_CLK_DDRCK);
+
+ /* bring phy and core out of reset */
+ reset_block(SYS_CTRL_RST_DDR_PHY, 0);
+ reset_block(SYS_CTRL_RST_DDR, 0);
+
+ /* DDR runs at half the speed of the CPU */
+ ddr_setup(mhz >> 1);
+ return;
+}
diff --git a/package/boot/uboot-oxnas/files/board/ox820/ddr.h b/package/boot/uboot-oxnas/files/board/ox820/ddr.h
new file mode 100644
index 0000000..a3c1990
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/ddr.h
@@ -0,0 +1,148 @@
+/*******************************************************************
+*
+* File: ddr_oxsemi.h
+*
+* Description: Declarations for DDR routines and data objects
+*
+* Author: Julien Margetts
+*
+* Copyright: Oxford Semiconductor Ltd, 2009
+*/
+
+void ddr_oxsemi_setup(int mhz);
+
+/* define to refresh in bursts of 8 */
+#define BURST_REFRESH_ENABLE
+
+#define DDR_BASE 0x44700000
+
+#define C_DDR_CFG_REG (DDR_BASE + 0x00)
+#define C_CFG_DDR 0x80000000
+#define C_CFG_SDR 0x00000000
+#define C_CFG_WIDTH8 0x00200000
+#define C_CFG_WIDTH16 0x00100000
+#define C_CFG_WIDTH32 0x00000000
+#define C_CFG_SIZE_FACTOR 0x00020000
+#define C_CFG_REFRESH_ENABLE 0x00010000
+#define C_CFG_BURST_REFRESH_ENABLE 0x01000000
+#define C_CFG_SIZE(x) (x << 17)
+#define CFG_SIZE_2MB 1
+#define CFG_SIZE_4MB 2
+#define CFG_SIZE_8MB 3
+#define CFG_SIZE_16MB 4
+#define CFG_SIZE_32MB 5
+#define CFG_SIZE_64MB 6
+#define CFG_SIZE_128MB 7
+
+#define C_DDR_BLKEN_REG (DDR_BASE + 0x04)
+#define C_BLKEN_DDR_ON 0x80000000
+
+#define C_DDR_STAT_REG (DDR_BASE + 0x08)
+
+#define C_DDR_CMD_REG (DDR_BASE + 0x0C)
+#define C_CMD_SEND_COMMAND (1UL << 31) | (1 << 21) // RAS/CAS/WE/CS all low(active), CKE High, indicates
+#define C_CMD_WAKE_UP 0x80FC0000 // Asserts CKE
+#define C_CMD_MODE_SDR 0x80200022 // Sets CL=2 BL=4
+#define C_CMD_MODE_DDR 0x80200063 // Sets CL=2.5 BL=8
+#define C_CMD_RESET_DLL 0x00000100 // A8=1 Use in conjunction with C_CMD_MODE_DDR
+#define C_CMD_PRECHARGE_ALL 0x80280400
+#define C_CMD_AUTO_REFRESH 0x80240000
+#define C_CMD_SELF_REFRESH 0x80040000 // As AUTO-REFRESH but with CKE low
+#define C_CMD_NOP 0x803C0000 // NOP just to insert guaranteed delay
+#define C_CMD_DDR2_EMR1 0x80210000 // Load extended mode register 1 with zeros (for init), CKE still set
+//#define C_CMD_DDR2_EMR1 0x80210400 // Load extended mode register 1 with zeros (for init), CKE still set
+#define C_CMD_ENABLE_DLL 0x00000000 // Values used in conjuction with C_CMD_DDR2_EMR1
+#define C_CMD_DISABLE_DLL 0x00000001
+#define C_CMD_REDUCED_DRIVE 0x00000002
+#define C_CMD_ODT_DISABLED 0x00000000
+#define C_CMD_ODT_50 0x00000044
+#define C_CMD_ODT_75 0x00000004
+#define C_CMD_ODT_150 0x00000040
+#define C_CMD_MODE_DDR2_OCD_DFLT 0x00000380
+#define C_CMD_MODE_DDR2_OCD_EXIT 0x00000000
+
+#define C_CMD_DDR2_EMR2 0x80220000 // Load extended mode register 2 with zeros (for init), CKE still set
+#define C_CMD_DDR2_EMR3 0x80230000 // Load extended mode register 3 with zeros (for init), CKE still set
+
+#define C_DDR_AHB_REG (DDR_BASE + 0x10)
+#define C_AHB_NO_RCACHES 0xFFFF0000
+#define C_AHB_FLUSH_ALL_RCACHES 0x0000FFFF
+#define C_AHB_FLUSH_AHB0_RCACHE 0x00000001
+#define C_AHB_FLUSH_AHB1_RCACHE 0x00000002
+
+#define C_DDR_DLL_REG (DDR_BASE + 0x14)
+#define C_DLL_DISABLED 0x00000000
+#define C_DLL_MANUAL 0x80000000
+#define C_DLL_AUTO_OFFSET 0xA0000000
+#define C_DLL_AUTO_IN_REFRESH 0xC0000000
+#define C_DLL_AUTOMATIC 0xE0000000
+
+#define C_DDR_MON_REG (DDR_BASE + 0x18)
+#define C_MON_ALL 0x00000010
+#define C_MON_CLIENT 0x00000000
+
+#define C_DDR_DIAG_REG (DDR_BASE + 0x1C)
+#define C_DDR_DIAG2_REG (DDR_BASE + 0x20)
+
+#define C_DDR_IOC_REG (DDR_BASE + 0x24)
+#define C_DDR_IOC_PWR_DWN (1 << 10)
+#define C_DDR_IOC_SEL_SSTL (1 << 9)
+#define C_DDR_IOC_CK_DRIVE(x) ((x) << 6)
+#define C_DDR_IOC_DQ_DRIVE(x) ((x) << 3)
+#define C_DDR_IOC_XX_DRIVE(x) ((x) << 0)
+
+#define C_DDR_ARB_REG (DDR_BASE + 0x28)
+#define C_DDR_ARB_MIDBUF (1 << 4)
+#define C_DDR_ARB_LRUBANK (1 << 3)
+#define C_DDR_ARB_REQAGE (1 << 2)
+#define C_DDR_ARB_DATDIR (1 << 1)
+#define C_DDR_ARB_DATDIR_NC (1 << 0)
+
+#define C_TOP_ADDRESS_BIT_TEST 22
+#define C_MEM_BASE C_SDRAM_BASE
+
+#define C_MEM_TEST_BASE 0
+#define C_MEM_TEST_LEN 1920
+#define C_MAX_RAND_ACCESS_LEN 16
+
+#define C_DDR_REG_IGNORE (DDR_BASE + 0x2C)
+#define C_DDR_AHB4_REG (DDR_BASE + 0x44)
+
+#define C_DDR_REG_TIMING0 (DDR_BASE + 0x34)
+#define C_DDR_REG_TIMING1 (DDR_BASE + 0x38)
+#define C_DDR_REG_TIMING2 (DDR_BASE + 0x3C)
+
+#define C_DDR_REG_PHY0 (DDR_BASE + 0x48)
+#define C_DDR_REG_PHY1 (DDR_BASE + 0x4C)
+#define C_DDR_REG_PHY2 (DDR_BASE + 0x50)
+#define C_DDR_REG_PHY3 (DDR_BASE + 0x54)
+
+#define C_DDR_REG_GENERIC (DDR_BASE + 0x60)
+
+#define C_OXSEMI_DDRC_SIGNATURE 0x054415AA
+
+#define DDR_PHY_BASE (DDR_BASE + 0x80000)
+#define DDR_PHY_TIMING (DDR_PHY_BASE + 0x48)
+#define DDR_PHY_TIMING_CK (1 << 12)
+#define DDR_PHY_TIMING_INC (1 << 13)
+#define DDR_PHY_TIMING_W_CE (1 << 14)
+#define DDR_PHY_TIMING_W_RST (1 << 15)
+#define DDR_PHY_TIMING_I_CE (1 << 16)
+#define DDR_PHY_TIMING_I_RST (1 << 17)
+
+#define C_DDR_REG_PHY_TIMING (DDR_PHY_BASE + 0x50)
+#define C_DDR_REG_PHY_WR_RATIO (DDR_PHY_BASE + 0x74)
+#define C_DDR_REG_PHY_RD_RATIO (DDR_PHY_BASE + 0x78)
+
+#define C_DDR_TRANSACTION_ROUTING (DDR_PHY_BASE + 0xC8)
+#define DDR_ROUTE_CPU0_INSTR_SHIFT 0
+#define DDR_ROUTE_CPU0_RDDATA_SHIFT 4
+#define DDR_ROUTE_CPU0_WRDATA_SHIFT 6
+#define DDR_ROUTE_CPU1_INSTR_SHIFT 8
+#define DDR_ROUTE_CPU1_RDDATA_SHIFT 12
+#define DDR_ROUTE_CPU1_WRDATA_SHIFT 14
+
+unsigned int ddrc_signature(void);
+void set_ddr_timing(unsigned int w, unsigned int i);
+int pause(unsigned int us);
+void set_ddr_sel(int val);
diff --git a/package/boot/uboot-oxnas/files/board/ox820/lowlevel_init.S b/package/boot/uboot-oxnas/files/board/ox820/lowlevel_init.S
new file mode 100644
index 0000000..3328b7a
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/lowlevel_init.S
@@ -0,0 +1,20 @@
+#include <config.h>
+#ifndef CONFIG_SPL_BUILD
+
+.globl lowlevel_init
+lowlevel_init:
+ /*
+ * Copy exception table to relocated address in internal SRAM
+ */
+ ldr r0, src /* Address of exception table in flash */
+ ldr r1, dest /* Relocated address of exception table */
+ ldmia r0!, {r3-r10} /* Copy exception table and jump values from */
+ stmia r1!, {r3-r10} /* FLASH to relocated address */
+ ldmia r0!, {r3-r10}
+ stmia r1!, {r3-r10}
+ mov pc, lr
+
+src: .word CONFIG_SYS_TEXT_BASE
+dest: .word CONFIG_SRAM_BASE
+
+#endif
\ No newline at end of file
diff --git a/package/boot/uboot-oxnas/files/board/ox820/ox820.c b/package/boot/uboot-oxnas/files/board/ox820/ox820.c
new file mode 100644
index 0000000..32c91f4
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/ox820.c
@@ -0,0 +1,373 @@
+#include <common.h>
+#include <spl.h>
+#include <phy.h>
+#include <netdev.h>
+#include <ide.h>
+#include <nand.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sysctl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+
+#ifdef DEBUG
+#define DILIGENCE (1048576/4)
+static int test_memory(u32 memory)
+{
+ volatile u32 *read;
+ volatile u32 *write;
+ const u32 INIT_PATTERN = 0xAA55AA55;
+ const u32 INC_PATTERN = 0x01030507;
+ u32 pattern;
+ int check;
+ int i;
+
+ check = 0;
+ read = write = (volatile u32 *) memory;
+ pattern = INIT_PATTERN;
+ for (i = 0; i < DILIGENCE; i++) {
+ *write++ = pattern;
+ pattern += INC_PATTERN;
+ }
+ puts("testing\n");
+ pattern = INIT_PATTERN;
+ for (i = 0; i < DILIGENCE; i++) {
+ check += (pattern == *read++) ? 1 : 0;
+ pattern += INC_PATTERN;
+ }
+ return (check == DILIGENCE) ? 0 : -1;
+}
+#endif
+
+void uart_init(void)
+{
+ /* Reset UART1 */
+ reset_block(SYS_CTRL_RST_UART1, 1);
+ udelay(100);
+ reset_block(SYS_CTRL_RST_UART1, 0);
+ udelay(100);
+
+ /* Setup pin mux'ing for UART1 */
+ pinmux_set(PINMUX_BANK_MFA, 30, PINMUX_UARTA_SIN);
+ pinmux_set(PINMUX_BANK_MFA, 31, PINMUX_UARTA_SOUT);
+}
+
+extern void init_ddr(int mhz);
+
+void board_inithw(void)
+{
+ int plla_freq;
+#ifdef DEBUG
+ int i;
+#endif /* DEBUG */
+
+ timer_init();
+ uart_init();
+ preloader_console_init();
+
+ plla_freq = plla_set_config(CONFIG_PLLA_FREQ_MHZ);
+ init_ddr(plla_freq);
+
+#ifdef DEBUG
+ if(test_memory(CONFIG_SYS_SDRAM_BASE)) {
+ puts("memory test failed\n");
+ } else {
+ puts("memory test done\n");
+ }
+#endif /* DEBUG */
+#ifdef CONFIG_SPL_BSS_DRAM_START
+ extern char __bss_dram_start[];
+ extern char __bss_dram_end[];
+ memset(&__bss_dram_start, 0, __bss_dram_end - __bss_dram_start);
+#endif
+}
+
+void board_init_f(ulong dummy)
+{
+ /* Set the stack pointer. */
+ asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ /* Set global data pointer. */
+ gd = &gdata;
+
+ board_inithw();
+
+ board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+ return CONFIG_SPL_BOOT_DEVICE;
+}
+
+#ifdef CONFIG_SPL_BLOCK_SUPPORT
+void spl_block_device_init(void)
+{
+ ide_init();
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return (serial_tstc() && serial_getc() == 'c');
+}
+#endif
+
+void spl_display_print(void)
+{
+ /* print a hint, so that we will not use the wrong SPL by mistake */
+ puts(" Boot device: " BOOT_DEVICE_TYPE "\n" );
+}
+
+void lowlevel_init(void)
+{
+}
+
+#ifdef USE_DL_PREFIX
+/* quick and dirty memory allocation */
+static ulong next_mem = CONFIG_SPL_MALLOC_START;
+
+void *memalign(size_t alignment, size_t bytes)
+{
+ ulong mem = ALIGN(next_mem, alignment);
+
+ next_mem = mem + bytes;
+
+ if (next_mem > CONFIG_SYS_SDRAM_BASE + CONFIG_MIN_SDRAM_SIZE) {
+ printf("spl: out of memory\n");
+ hang();
+ }
+
+ return (void *)mem;
+}
+
+void free(void* mem)
+{
+}
+#endif
+
+#endif /* CONFIG_SPL_BUILD */
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+#define STATIC_CTL_BANK0 (STATIC_CONTROL_BASE + 4)
+#define STATIC_READ_CYCLE_SHIFT 0
+#define STATIC_DELAYED_OE (1 << 7)
+#define STATIC_WRITE_CYCLE_SHIFT 8
+#define STATIC_WRITE_PULSE_SHIFT 16
+#define STATIC_WRITE_BURST_EN (1 << 23)
+#define STATIC_TURN_AROUND_SHIFT 24
+#define STATIC_BUFFER_PRESENT (1 << 28)
+#define STATIC_READ_BURST_EN (1 << 29)
+#define STATIC_BUS_WIDTH8 (0 << 30)
+#define STATIC_BUS_WIDTH16 (1 << 30)
+#define STATIC_BUS_WIDTH32 (2 << 30)
+
+void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ nandaddr &= ~(BIT(NAND_ALE_ADDR_PIN) | BIT(NAND_CLE_ADDR_PIN));
+ if (ctrl & NAND_CLE)
+ nandaddr |= BIT(NAND_CLE_ADDR_PIN);
+ else if (ctrl & NAND_ALE)
+ nandaddr |= BIT(NAND_ALE_ADDR_PIN);
+ this->IO_ADDR_W = (void __iomem *) nandaddr;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, (void __iomem *) nandaddr);
+}
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOOT_FROM_NAND)
+
+int nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ udelay(chip->chip_delay);
+
+ return 1;
+}
+
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ buf[i] = readb(chip->IO_ADDR_R);
+}
+
+void nand_dev_reset(struct nand_chip *chip)
+{
+ writeb(NAND_CMD_RESET, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN));
+ udelay(chip->chip_delay);
+ writeb(NAND_CMD_STATUS, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN));
+ while (!(readb(chip->IO_ADDR_R) & NAND_STATUS_READY)) {
+ ;
+ }
+}
+
+#else
+
+#define nand_dev_reset(chip) /* framework will reset the chip anyway */
+#define nand_read_buf NULL /* framework will provide a default one */
+#define nand_dev_ready NULL /* dev_ready is optional */
+
+#endif
+
+int board_nand_init(struct nand_chip *chip)
+{
+ /* Block reset Static core */
+ reset_block(SYS_CTRL_RST_STATIC, 1);
+ reset_block(SYS_CTRL_RST_STATIC, 0);
+
+ /* Enable clock to Static core */
+ enable_clock(SYS_CTRL_CLK_STATIC);
+
+ /* enable flash support on static bus.
+ * Enable static bus onto GPIOs, only CS0 */
+ pinmux_set(PINMUX_BANK_MFA, 12, PINMUX_STATIC_DATA0);
+ pinmux_set(PINMUX_BANK_MFA, 13, PINMUX_STATIC_DATA1);
+ pinmux_set(PINMUX_BANK_MFA, 14, PINMUX_STATIC_DATA2);
+ pinmux_set(PINMUX_BANK_MFA, 15, PINMUX_STATIC_DATA3);
+ pinmux_set(PINMUX_BANK_MFA, 16, PINMUX_STATIC_DATA4);
+ pinmux_set(PINMUX_BANK_MFA, 17, PINMUX_STATIC_DATA5);
+ pinmux_set(PINMUX_BANK_MFA, 18, PINMUX_STATIC_DATA6);
+ pinmux_set(PINMUX_BANK_MFA, 19, PINMUX_STATIC_DATA7);
+
+ pinmux_set(PINMUX_BANK_MFA, 20, PINMUX_STATIC_NWE);
+ pinmux_set(PINMUX_BANK_MFA, 21, PINMUX_STATIC_NOE);
+ pinmux_set(PINMUX_BANK_MFA, 22, PINMUX_STATIC_NCS);
+ pinmux_set(PINMUX_BANK_MFA, 23, PINMUX_STATIC_ADDR18);
+ pinmux_set(PINMUX_BANK_MFA, 24, PINMUX_STATIC_ADDR19);
+
+ /* Setup the static bus CS0 to access FLASH */
+
+ writel((0x3f << STATIC_READ_CYCLE_SHIFT)
+ | (0x3f << STATIC_WRITE_CYCLE_SHIFT)
+ | (0x1f << STATIC_WRITE_PULSE_SHIFT)
+ | (0x03 << STATIC_TURN_AROUND_SHIFT) |
+ STATIC_BUS_WIDTH16,
+ STATIC_CTL_BANK0);
+
+ chip->cmd_ctrl = nand_hwcontrol;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->chip_delay = 30;
+ chip->dev_ready = nand_dev_ready;
+ chip->read_buf = nand_read_buf;
+
+ nand_dev_reset(chip);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ /* assume uart is already initialized by SPL */
+
+#if defined(CONFIG_START_IDE)
+ puts("IDE: ");
+ ide_init();
+#endif
+
+ return 0;
+}
+
+/* copied from board/evb64260/sdram_init.c */
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+static long int dram_size (long int *base, long int maxsize)
+{
+ volatile long int *addr, *b = base;
+ long int cnt, val, save1, save2;
+
+#define STARTVAL (CONFIG_MIN_SDRAM_SIZE / 2) /* start test at half size */
+ for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long);
+ cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save1 = *addr; /* save contents of addr */
+ save2 = *b; /* save contents of base */
+
+ *addr = cnt; /* write cnt to addr */
+ *b = 0; /* put null at base */
+
+ /* check at base address */
+ if ((*b) != 0) {
+ *addr = save1; /* restore *addr */
+ *b = save2; /* restore *b */
+ return (0);
+ }
+ val = *addr; /* read *addr */
+
+ *addr = save1;
+ *b = save2;
+
+ if (val != cnt) {
+ /* fix boundary condition.. STARTVAL means zero */
+ if (cnt == STARTVAL / sizeof (long))
+ cnt = 0;
+ return (cnt * sizeof (long));
+ }
+ }
+ return maxsize;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = dram_size((long int *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_MAX_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ u32 value;
+
+ /* set the pin multiplexers to enable talking to Ethernent Phys */
+ pinmux_set(PINMUX_BANK_MFA, 3, PINMUX_MACA_MDC);
+ pinmux_set(PINMUX_BANK_MFA, 4, PINMUX_MACA_MDIO);
+
+ // Ensure the MAC block is properly reset
+ reset_block(SYS_CTRL_RST_MAC, 1);
+ udelay(10);
+ reset_block(SYS_CTRL_RST_MAC, 0);
+
+ // Enable the clock to the MAC block
+ enable_clock(SYS_CTRL_CLK_MAC);
+
+ value = readl(SYS_CTRL_GMAC_CTRL);
+ /* Use simple mux for 25/125 Mhz clock switching */
+ value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX);
+ /* Enable GMII_GTXCLK to follow GMII_REFCLK - required for gigabit PHY */
+ value |= BIT(SYS_CTRL_GMAC_CKEN_GTX);
+ /* set auto tx speed */
+ value |= BIT(SYS_CTRL_GMAC_AUTOSPEED);
+
+ writel(value, SYS_CTRL_GMAC_CTRL);
+
+ return designware_initialize(MAC_BASE, PHY_INTERFACE_MODE_RGMII);
+}
+
diff --git a/package/boot/uboot-oxnas/files/board/ox820/spl_start.S b/package/boot/uboot-oxnas/files/board/ox820/spl_start.S
new file mode 100644
index 0000000..2eab3f5
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/spl_start.S
@@ -0,0 +1,21 @@
+.section .init
+.globl _spl_start
+_spl_start:
+ b _start
+ b _start+0x4
+ b _start+0x8
+ b _start+0xc
+ b _start+0x10
+ b _start+0x14
+ b _start+0x18
+ b _start+0x1c
+ .space 0x30 - (. - _spl_start)
+ .ascii "BOOT" /* 0x30 signature*/
+ .word 0x50 /* 0x34 header size itself */
+ .word 0 /* 0x38 */
+ .word 0x5000f000 /* boot report location */
+ .word _start /* 0x40 */
+
+main_crc_size: .word code_size /* 0x44 filled by linker */
+main_crc: .word 0 /* 0x48 fill later */
+header_crc: .word 0 /* 0x4C header crc*/
diff --git a/package/boot/uboot-oxnas/files/board/ox820/u-boot-spl.lds b/package/boot/uboot-oxnas/files/board/ox820/u-boot-spl.lds
new file mode 100644
index 0000000..a8d90df
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/board/ox820/u-boot-spl.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY
+{
+ sram (rwx) : ORIGIN = CONFIG_SPL_TEXT_BASE, LENGTH = CONFIG_SPL_MAX_SIZE
+ dram : ORIGIN = CONFIG_SPL_BSS_DRAM_START, LENGTH = CONFIG_SPL_BSS_DRAM_SIZE
+}
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_spl_start)
+SECTIONS
+{
+ .text.0 :
+ {
+ *(.init*)
+ }
+
+
+ /* Start of the rest of the SPL */
+ code_start = . ;
+
+ .text.1 :
+ {
+ *(.text*)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data*)
+ }
+
+ . = ALIGN(4);
+
+ __image_copy_end = .;
+ code_size = . - code_start;
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ . = ALIGN(0x800);
+
+ _end = .;
+
+ .bss.sram __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss.stdio_devices)
+ *(.bss.serial_current)
+ . = ALIGN(4);
+ __bss_end = .;
+ }
+
+ .bss : {
+ __bss_dram_start = .;
+ *(.bss*)
+ __bss_dram_end = .;
+ } > dram
+
+ /DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynsym*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.hash*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/package/boot/uboot-oxnas/files/common/env_ext4.c b/package/boot/uboot-oxnas/files/common/env_ext4.c
new file mode 100644
index 0000000..e98d94d
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/common/env_ext4.c
@@ -0,0 +1,116 @@
+/*
+ * (c) Copyright 2011 by Tigris Elektronik GmbH
+ *
+ * Author:
+ * Maximilian Schwerin <mvs at tigris.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <command.h>
+#include <environment.h>
+#include <linux/stddef.h>
+#include <malloc.h>
+#include <search.h>
+#include <errno.h>
+#include <ext4fs.h>
+
+char *env_name_spec = "EXT4";
+
+env_t *env_ptr;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int env_init(void)
+{
+ /* use default */
+ gd->env_addr = (ulong)&default_environment[0];
+ gd->env_valid = 1;
+
+ return 0;
+}
+
+#ifdef CONFIG_CMD_SAVEENV
+int saveenv(void)
+{
+ env_t env_new;
+ ssize_t len;
+ char *res;
+ block_dev_desc_t *dev_desc = NULL;
+ int dev = EXT4_ENV_DEVICE;
+ int part = EXT4_ENV_PART;
+ int err;
+
+ res = (char *)&env_new.data;
+ len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
+ if (len < 0) {
+ error("Cannot export environment: errno = %d\n", errno);
+ return 1;
+ }
+
+ dev_desc = get_dev(EXT4_ENV_INTERFACE, dev);
+ if (dev_desc == NULL) {
+ printf("Failed to find %s%d\n",
+ EXT4_ENV_INTERFACE, dev);
+ return 1;
+ }
+
+ err = ext4_register_device(dev_desc, part);
+ if (err) {
+ printf("Failed to register %s%d:%d\n",
+ EXT4_ENV_INTERFACE, dev, part);
+ return 1;
+ }
+
+ env_new.crc = crc32(0, env_new.data, ENV_SIZE);
+ err = ext4fs_write(EXT4_ENV_FILE, (void *)&env_new, sizeof(env_t));
+ ext4fs_close();
+ if (err == -1) {
+ printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
+ EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
+ return 1;
+ }
+
+ puts("done\n");
+ return 0;
+}
+#endif /* CONFIG_CMD_SAVEENV */
+
+void env_relocate_spec(void)
+{
+ char buf[CONFIG_ENV_SIZE];
+ block_dev_desc_t *dev_desc = NULL;
+ int dev = EXT4_ENV_DEVICE;
+ int part = EXT4_ENV_PART;
+ int err;
+
+ dev_desc = get_dev(EXT4_ENV_INTERFACE, dev);
+ if (dev_desc == NULL) {
+ printf("Failed to find %s%d\n",
+ EXT4_ENV_INTERFACE, dev);
+ set_default_env(NULL);
+ return;
+ }
+
+ err = ext4_register_device(dev_desc, part);
+ if (err) {
+ printf("Failed to register %s%d:%d\n",
+ EXT4_ENV_INTERFACE, dev, part);
+ set_default_env(NULL);
+ return;
+ }
+
+ err = ext4_read_file(EXT4_ENV_FILE, (uchar *)&buf, 0, CONFIG_ENV_SIZE);
+ ext4fs_close();
+
+ if (err == -1) {
+ printf("\n** Unable to read \"%s\" from %s%d:%d **\n",
+ EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part);
+ set_default_env(NULL);
+ return;
+ }
+
+ env_import(buf, 1);
+}
diff --git a/package/boot/uboot-oxnas/files/common/spl/spl_block.c b/package/boot/uboot-oxnas/files/common/spl/spl_block.c
new file mode 100644
index 0000000..f16413a
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/common/spl/spl_block.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2013
+ *
+ * Ma Haijun <mahaijuns at gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <spl.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <version.h>
+#include <part.h>
+#include <fat.h>
+#include <ext4fs.h>
+
+/* should be implemented by board */
+extern void spl_block_device_init(void);
+
+block_dev_desc_t * spl_get_block_device(void)
+{
+ block_dev_desc_t * device;
+
+ spl_block_device_init();
+
+ device = get_dev(CONFIG_SPL_BLOCKDEV_INTERFACE, CONFIG_SPL_BLOCKDEV_ID);
+ if (!device) {
+ printf("blk device %s%d not exists\n",
+ CONFIG_SPL_BLOCKDEV_INTERFACE,
+ CONFIG_SPL_BLOCKDEV_ID);
+ hang();
+ }
+
+ return device;
+}
+
+#ifdef CONFIG_SPL_FAT_SUPPORT
+static int block_load_image_fat(const char *filename)
+{
+ int err;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ err = file_fat_read(filename, header, sizeof(struct image_header));
+ if (err <= 0)
+ goto end;
+
+ spl_parse_image_header(header);
+
+ err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0);
+
+end:
+ if (err <= 0)
+ printf("spl: error reading image %s, err - %d\n",
+ filename, err);
+
+ return (err <= 0);
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+static int block_load_image_fat_os(void)
+{
+ int err;
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
+ if (err <= 0) {
+ return -1;
+ }
+
+ return block_load_image_fat(CONFIG_SPL_FAT_LOAD_KERNEL_NAME);
+}
+#endif
+
+void spl_block_load_image(void)
+{
+ int err;
+ block_dev_desc_t * device;
+
+ device = spl_get_block_device();
+ err = fat_register_device(device, CONFIG_BLOCKDEV_FAT_BOOT_PARTITION);
+ if (err) {
+ printf("spl: fat register err - %d\n", err);
+ hang();
+ }
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || block_load_image_fat_os())
+#endif
+ {
+ err = block_load_image_fat(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
+ if (err)
+ hang();
+ }
+}
+#elif defined(CONFIG_SPL_EXT4_SUPPORT) /* end CONFIG_SPL_FAT_SUPPORT */
+static int block_load_image_ext4(const char *filename)
+{
+ int err;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ err = ext4_read_file(filename, header, 0, sizeof(struct image_header));
+ if (err <= 0)
+ goto end;
+
+ spl_parse_image_header(header);
+
+ err = ext4_read_file(filename, (u8 *)spl_image.load_addr, 0, 0);
+
+end:
+ return (err <= 0);
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+static int block_load_image_ext4_os(void)
+{
+ int err;
+
+ err = ext4_read_file(CONFIG_SPL_EXT4_LOAD_ARGS_NAME,
+ (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, 0);
+ if (err <= 0) {
+ return -1;
+ }
+
+ return block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_KERNEL_NAME);
+}
+#endif
+
+void spl_block_load_image(void)
+{
+ int err;
+ block_dev_desc_t * device;
+
+ device = spl_get_block_device();
+ err = ext4_register_device(device, CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION);
+ if (err) {
+ hang();
+ }
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || block_load_image_ext4_os())
+#endif
+ {
+ err = block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME);
+ if (err)
+ hang();
+ }
+}
+#else /* end CONFIG_SPL_EXT4_SUPPORT */
+static int block_load_image_raw(block_dev_desc_t * device, lbaint_t sector)
+{
+ int n;
+ u32 image_size_sectors;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ /* read image header to find the image size & load address */
+ n = device->block_read(device->dev, sector, 1, header);
+
+ if (n != 1) {
+ printf("spl: blk read err\n");
+ return 1;
+ }
+
+ spl_parse_image_header(header);
+
+ /* convert size to sectors - round up */
+ image_size_sectors = (spl_image.size + 512 - 1) / 512;
+ n = device->block_read(device->dev, sector, image_size_sectors,
+ (void *)spl_image.load_addr);
+
+ if (n != image_size_sectors) {
+ printf("spl: blk read err\n");
+ return 1;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_SPL_OS_BOOT
+static int block_load_image_raw_os(block_dev_desc_t * device)
+{
+ int n;
+
+ n = device->block_read(device->dev, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR,
+ CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS,
+ (u32 *)CONFIG_SYS_SPL_ARGS_ADDR);
+ /* flush cache after read */
+ flush_cache(addr, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS * 512);
+
+ if (n != CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS) {
+ printf("args blk read error\n");
+ return -1;
+ }
+
+ return block_load_image_raw(device, CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR);
+}
+#endif
+
+void spl_block_load_image(void)
+{
+ int err;
+ block_dev_desc_t * device;
+
+ device = spl_get_block_device();
+#ifdef CONFIG_SPL_OS_BOOT
+ if (spl_start_uboot() || block_load_image_raw_os(device))
+#endif
+ {
+ err = block_load_image_raw(device,
+ CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR);
+ if (err)
+ hang();
+ }
+}
+#endif /* CONFIG_SPL_FAT_SUPPORT */
diff --git a/package/boot/uboot-oxnas/files/drivers/block/plxsata_ide.c b/package/boot/uboot-oxnas/files/drivers/block/plxsata_ide.c
new file mode 100644
index 0000000..7e0e78f
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/drivers/block/plxsata_ide.c
@@ -0,0 +1,1170 @@
+/*
+ * (C) Copyright 2005
+ * Oxford Semiconductor Ltd
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,`
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/clock.h>
+
+/**
+ * SATA related definitions
+ */
+#define ATA_PORT_CTL 0
+#define ATA_PORT_FEATURE 1
+#define ATA_PORT_NSECT 2
+#define ATA_PORT_LBAL 3
+#define ATA_PORT_LBAM 4
+#define ATA_PORT_LBAH 5
+#define ATA_PORT_DEVICE 6
+#define ATA_PORT_COMMAND 7
+
+/* The offsets to the SATA registers */
+#define SATA_ORB1_OFF 0
+#define SATA_ORB2_OFF 1
+#define SATA_ORB3_OFF 2
+#define SATA_ORB4_OFF 3
+#define SATA_ORB5_OFF 4
+
+#define SATA_FIS_ACCESS 11
+#define SATA_INT_STATUS_OFF 12 /* Read only */
+#define SATA_INT_CLR_OFF 12 /* Write only */
+#define SATA_INT_ENABLE_OFF 13 /* Read only */
+#define SATA_INT_ENABLE_SET_OFF 13 /* Write only */
+#define SATA_INT_ENABLE_CLR_OFF 14 /* Write only */
+#define SATA_VERSION_OFF 15
+#define SATA_CONTROL_OFF 23
+#define SATA_COMMAND_OFF 24
+#define SATA_PORT_CONTROL_OFF 25
+#define SATA_DRIVE_CONTROL_OFF 26
+
+/* The offsets to the link registers that are access in an asynchronous manner */
+#define SATA_LINK_DATA 28
+#define SATA_LINK_RD_ADDR 29
+#define SATA_LINK_WR_ADDR 30
+#define SATA_LINK_CONTROL 31
+
+/* SATA interrupt status register fields */
+#define SATA_INT_STATUS_EOC_RAW_BIT ( 0 + 16)
+#define SATA_INT_STATUS_ERROR_BIT ( 2 + 16)
+#define SATA_INT_STATUS_EOADT_RAW_BIT ( 1 + 16)
+
+/* SATA core command register commands */
+#define SATA_CMD_WRITE_TO_ORB_REGS 2
+#define SATA_CMD_WRITE_TO_ORB_REGS_NO_COMMAND 4
+
+#define SATA_CMD_BUSY_BIT 7
+
+#define SATA_SCTL_CLR_ERR 0x00000316UL
+
+#define SATA_LBAL_BIT 0
+#define SATA_LBAM_BIT 8
+#define SATA_LBAH_BIT 16
+#define SATA_HOB_LBAH_BIT 24
+#define SATA_DEVICE_BIT 24
+#define SATA_NSECT_BIT 0
+#define SATA_HOB_NSECT_BIT 8
+#define SATA_LBA32_BIT 0
+#define SATA_LBA40_BIT 8
+#define SATA_FEATURE_BIT 16
+#define SATA_COMMAND_BIT 24
+#define SATA_CTL_BIT 24
+
+/* ATA status (7) register field definitions */
+#define ATA_STATUS_BSY_BIT 7
+#define ATA_STATUS_DRDY_BIT 6
+#define ATA_STATUS_DF_BIT 5
+#define ATA_STATUS_DRQ_BIT 3
+#define ATA_STATUS_ERR_BIT 0
+
+/* ATA device (6) register field definitions */
+#define ATA_DEVICE_FIXED_MASK 0xA0
+#define ATA_DEVICE_DRV_BIT 4
+#define ATA_DEVICE_DRV_NUM_BITS 1
+#define ATA_DEVICE_LBA_BIT 6
+
+/* ATA Command register initiated commands */
+#define ATA_CMD_INIT 0x91
+#define ATA_CMD_IDENT 0xEC
+
+#define SATA_STD_ASYNC_REGS_OFF 0x20
+#define SATA_SCR_STATUS 0
+#define SATA_SCR_ERROR 1
+#define SATA_SCR_CONTROL 2
+#define SATA_SCR_ACTIVE 3
+#define SATA_SCR_NOTIFICAION 4
+
+#define SATA_BURST_BUF_FORCE_EOT_BIT 0
+#define SATA_BURST_BUF_DATA_INJ_ENABLE_BIT 1
+#define SATA_BURST_BUF_DIR_BIT 2
+#define SATA_BURST_BUF_DATA_INJ_END_BIT 3
+#define SATA_BURST_BUF_FIFO_DIS_BIT 4
+#define SATA_BURST_BUF_DIS_DREQ_BIT 5
+#define SATA_BURST_BUF_DREQ_BIT 6
+
+#define SATA_OPCODE_MASK 0x3
+
+#define SATA_DMA_CHANNEL 0
+
+#define DMA_CTRL_STATUS (0x0)
+#define DMA_BASE_SRC_ADR (0x4)
+#define DMA_BASE_DST_ADR (0x8)
+#define DMA_BYTE_CNT (0xC)
+#define DMA_CURRENT_SRC_ADR (0x10)
+#define DMA_CURRENT_DST_ADR (0x14)
+#define DMA_CURRENT_BYTE_CNT (0x18)
+#define DMA_INTR_ID (0x1C)
+#define DMA_INTR_CLEAR_REG (DMA_CURRENT_SRC_ADR)
+
+#define DMA_CALC_REG_ADR(channel, register) ((volatile u32*)(DMA_BASE + ((channel) << 5) + (register)))
+
+#define DMA_CTRL_STATUS_FAIR_SHARE_ARB (1 << 0)
+#define DMA_CTRL_STATUS_IN_PROGRESS (1 << 1)
+#define DMA_CTRL_STATUS_SRC_DREQ_MASK (0x0000003C)
+#define DMA_CTRL_STATUS_SRC_DREQ_SHIFT (2)
+#define DMA_CTRL_STATUS_DEST_DREQ_MASK (0x000003C0)
+#define DMA_CTRL_STATUS_DEST_DREQ_SHIFT (6)
+#define DMA_CTRL_STATUS_INTR (1 << 10)
+#define DMA_CTRL_STATUS_NXT_FREE (1 << 11)
+#define DMA_CTRL_STATUS_RESET (1 << 12)
+#define DMA_CTRL_STATUS_DIR_MASK (0x00006000)
+#define DMA_CTRL_STATUS_DIR_SHIFT (13)
+#define DMA_CTRL_STATUS_SRC_ADR_MODE (1 << 15)
+#define DMA_CTRL_STATUS_DEST_ADR_MODE (1 << 16)
+#define DMA_CTRL_STATUS_TRANSFER_MODE_A (1 << 17)
+#define DMA_CTRL_STATUS_TRANSFER_MODE_B (1 << 18)
+#define DMA_CTRL_STATUS_SRC_WIDTH_MASK (0x00380000)
+#define DMA_CTRL_STATUS_SRC_WIDTH_SHIFT (19)
+#define DMA_CTRL_STATUS_DEST_WIDTH_MASK (0x01C00000)
+#define DMA_CTRL_STATUS_DEST_WIDTH_SHIFT (22)
+#define DMA_CTRL_STATUS_PAUSE (1 << 25)
+#define DMA_CTRL_STATUS_INTERRUPT_ENABLE (1 << 26)
+#define DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED (1 << 27)
+#define DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED (1 << 28)
+#define DMA_CTRL_STATUS_STARVE_LOW_PRIORITY (1 << 29)
+#define DMA_CTRL_STATUS_INTR_CLEAR_ENABLE (1 << 30)
+
+#define DMA_BYTE_CNT_MASK ((1 << 21) - 1)
+#define DMA_BYTE_CNT_WR_EOT_MASK (1 << 30)
+#define DMA_BYTE_CNT_RD_EOT_MASK (1 << 31)
+#define DMA_BYTE_CNT_BURST_MASK (1 << 28)
+
+#define MAKE_FIELD(value, num_bits, bit_num) (((value) & ((1 << (num_bits)) - 1)) << (bit_num))
+
+typedef enum oxnas_dma_mode {
+ OXNAS_DMA_MODE_FIXED, OXNAS_DMA_MODE_INC
+} oxnas_dma_mode_t;
+
+typedef enum oxnas_dma_direction {
+ OXNAS_DMA_TO_DEVICE, OXNAS_DMA_FROM_DEVICE
+} oxnas_dma_direction_t;
+
+/* The available buses to which the DMA controller is attached */
+typedef enum oxnas_dma_transfer_bus {
+ OXNAS_DMA_SIDE_A, OXNAS_DMA_SIDE_B
+} oxnas_dma_transfer_bus_t;
+
+/* Direction of data flow between the DMA controller's pair of interfaces */
+typedef enum oxnas_dma_transfer_direction {
+ OXNAS_DMA_A_TO_A, OXNAS_DMA_B_TO_A, OXNAS_DMA_A_TO_B, OXNAS_DMA_B_TO_B
+} oxnas_dma_transfer_direction_t;
+
+/* The available data widths */
+typedef enum oxnas_dma_transfer_width {
+ OXNAS_DMA_TRANSFER_WIDTH_8BITS,
+ OXNAS_DMA_TRANSFER_WIDTH_16BITS,
+ OXNAS_DMA_TRANSFER_WIDTH_32BITS
+} oxnas_dma_transfer_width_t;
+
+/* The mode of the DMA transfer */
+typedef enum oxnas_dma_transfer_mode {
+ OXNAS_DMA_TRANSFER_MODE_SINGLE, OXNAS_DMA_TRANSFER_MODE_BURST
+} oxnas_dma_transfer_mode_t;
+
+/* The available transfer targets */
+typedef enum oxnas_dma_dreq {
+ OXNAS_DMA_DREQ_SATA = 0, OXNAS_DMA_DREQ_MEMORY = 15
+} oxnas_dma_dreq_t;
+
+typedef struct oxnas_dma_device_settings {
+ unsigned long address_;
+ unsigned fifo_size_; // Chained transfers must take account of FIFO offset at end of previous transfer
+ unsigned char dreq_;
+ unsigned read_eot_ :1;
+ unsigned read_final_eot_ :1;
+ unsigned write_eot_ :1;
+ unsigned write_final_eot_ :1;
+ unsigned bus_ :1;
+ unsigned width_ :2;
+ unsigned transfer_mode_ :1;
+ unsigned address_mode_ :1;
+ unsigned address_really_fixed_ :1;
+} oxnas_dma_device_settings_t;
+
+static const int MAX_NO_ERROR_LOOPS = 100000; /* 1 second in units of 10uS */
+static const int MAX_DMA_XFER_LOOPS = 300000; /* 30 seconds in units of 100uS */
+static const int MAX_DMA_ABORT_LOOPS = 10000; /* 0.1 second in units of 10uS */
+static const int MAX_SRC_READ_LOOPS = 10000; /* 0.1 second in units of 10uS */
+static const int MAX_SRC_WRITE_LOOPS = 10000; /* 0.1 second in units of 10uS */
+static const int MAX_NOT_BUSY_LOOPS = 10000; /* 1 second in units of 100uS */
+
+/* The internal SATA drive on which we should attempt to find partitions */
+static volatile u32* sata_regs_base[2] = { (volatile u32*) SATA_0_REGS_BASE,
+ (volatile u32*) SATA_1_REGS_BASE,
+
+};
+static u32 wr_sata_orb1[2] = { 0, 0 };
+static u32 wr_sata_orb2[2] = { 0, 0 };
+static u32 wr_sata_orb3[2] = { 0, 0 };
+static u32 wr_sata_orb4[2] = { 0, 0 };
+
+#ifdef CONFIG_LBA48
+/* need keeping a record of NSECT LBAL LBAM LBAH ide_outb values for lba48 support */
+#define OUT_HISTORY_BASE ATA_PORT_NSECT
+#define OUT_HISTORY_MAX ATA_PORT_LBAH
+static unsigned char out_history[2][OUT_HISTORY_MAX - OUT_HISTORY_BASE + 1] = {};
+#endif
+
+static oxnas_dma_device_settings_t oxnas_sata_dma_settings = { .address_ =
+ SATA_DATA_BASE, .fifo_size_ = 16, .dreq_ = OXNAS_DMA_DREQ_SATA,
+ .read_eot_ = 0, .read_final_eot_ = 1, .write_eot_ = 0,
+ .write_final_eot_ = 1, .bus_ = OXNAS_DMA_SIDE_B, .width_ =
+ OXNAS_DMA_TRANSFER_WIDTH_32BITS, .transfer_mode_ =
+ OXNAS_DMA_TRANSFER_MODE_BURST, .address_mode_ =
+ OXNAS_DMA_MODE_FIXED, .address_really_fixed_ = 0 };
+
+oxnas_dma_device_settings_t oxnas_ram_dma_settings = { .address_ = 0,
+ .fifo_size_ = 0, .dreq_ = OXNAS_DMA_DREQ_MEMORY, .read_eot_ = 1,
+ .read_final_eot_ = 1, .write_eot_ = 1, .write_final_eot_ = 1,
+ .bus_ = OXNAS_DMA_SIDE_A, .width_ =
+ OXNAS_DMA_TRANSFER_WIDTH_32BITS, .transfer_mode_ =
+ OXNAS_DMA_TRANSFER_MODE_BURST, .address_mode_ =
+ OXNAS_DMA_MODE_FIXED, .address_really_fixed_ = 1 };
+
+static void xfer_wr_shadow_to_orbs(int device)
+{
+ *(sata_regs_base[device] + SATA_ORB1_OFF) = wr_sata_orb1[device];
+ *(sata_regs_base[device] + SATA_ORB2_OFF) = wr_sata_orb2[device];
+ *(sata_regs_base[device] + SATA_ORB3_OFF) = wr_sata_orb3[device];
+ *(sata_regs_base[device] + SATA_ORB4_OFF) = wr_sata_orb4[device];
+}
+
+static inline void device_select(int device)
+{
+ /* master/slave has no meaning to SATA core */
+}
+
+static int disk_present[CONFIG_SYS_IDE_MAXDEVICE];
+
+#include <ata.h>
+
+unsigned char ide_inb(int device, int port)
+{
+ unsigned char val = 0;
+
+ /* Only permit accesses to disks found to be present during ide_preinit() */
+ if (!disk_present[device]) {
+ return ATA_STAT_FAULT;
+ }
+
+ device_select(device);
+
+ switch (port) {
+ case ATA_PORT_CTL:
+ val = (*(sata_regs_base[device] + SATA_ORB4_OFF)
+ & (0xFFUL << SATA_CTL_BIT)) >> SATA_CTL_BIT;
+ break;
+ case ATA_PORT_FEATURE:
+ val = (*(sata_regs_base[device] + SATA_ORB2_OFF)
+ & (0xFFUL << SATA_FEATURE_BIT)) >> SATA_FEATURE_BIT;
+ break;
+ case ATA_PORT_NSECT:
+ val = (*(sata_regs_base[device] + SATA_ORB2_OFF)
+ & (0xFFUL << SATA_NSECT_BIT)) >> SATA_NSECT_BIT;
+ break;
+ case ATA_PORT_LBAL:
+ val = (*(sata_regs_base[device] + SATA_ORB3_OFF)
+ & (0xFFUL << SATA_LBAL_BIT)) >> SATA_LBAL_BIT;
+ break;
+ case ATA_PORT_LBAM:
+ val = (*(sata_regs_base[device] + SATA_ORB3_OFF)
+ & (0xFFUL << SATA_LBAM_BIT)) >> SATA_LBAM_BIT;
+ break;
+ case ATA_PORT_LBAH:
+ val = (*(sata_regs_base[device] + SATA_ORB3_OFF)
+ & (0xFFUL << SATA_LBAH_BIT)) >> SATA_LBAH_BIT;
+ break;
+ case ATA_PORT_DEVICE:
+ val = (*(sata_regs_base[device] + SATA_ORB3_OFF)
+ & (0xFFUL << SATA_HOB_LBAH_BIT)) >> SATA_HOB_LBAH_BIT;
+ val |= (*(sata_regs_base[device] + SATA_ORB1_OFF)
+ & (0xFFUL << SATA_DEVICE_BIT)) >> SATA_DEVICE_BIT;
+ break;
+ case ATA_PORT_COMMAND:
+ val = (*(sata_regs_base[device] + SATA_ORB2_OFF)
+ & (0xFFUL << SATA_COMMAND_BIT)) >> SATA_COMMAND_BIT;
+ val |= ATA_STAT_DRQ;
+ break;
+ default:
+ printf("ide_inb() Unknown port = %d\n", port);
+ break;
+ }
+
+ // printf("inb: %d:%01x => %02x\n", device, port, val);
+
+ return val;
+}
+
+/**
+ * Possible that ATA status will not become no-error, so must have timeout
+ * @returns An int which is zero on error
+ */
+static inline int wait_no_error(int device)
+{
+ int status = 0;
+
+ /* Check for ATA core error */
+ if (*(sata_regs_base[device] + SATA_INT_STATUS_OFF)
+ & (1 << SATA_INT_STATUS_ERROR_BIT)) {
+ printf("wait_no_error() SATA core flagged error\n");
+ } else {
+ int loops = MAX_NO_ERROR_LOOPS;
+ do {
+ /* Check for ATA device error */
+ if (!(ide_inb(device, ATA_PORT_COMMAND)
+ & (1 << ATA_STATUS_ERR_BIT))) {
+ status = 1;
+ break;
+ }
+ udelay(10);
+ } while (--loops);
+
+ if (!loops) {
+ printf("wait_no_error() Timed out of wait for SATA no-error condition\n");
+ }
+ }
+
+ return status;
+}
+
+/**
+ * Expect SATA command to always finish, perhaps with error
+ * @returns An int which is zero on error
+ */
+static inline int wait_sata_command_not_busy(int device)
+{
+ /* Wait for data to be available */
+ int status = 0;
+ int loops = MAX_NOT_BUSY_LOOPS;
+ do {
+ if (!(*(sata_regs_base[device] + SATA_COMMAND_OFF)
+ & (1 << SATA_CMD_BUSY_BIT))) {
+ status = 1;
+ break;
+ }
+ udelay(100);
+ } while (--loops);
+
+ if (!loops) {
+ printf("wait_sata_command_not_busy() Timed out of wait for SATA command to finish\n");
+ }
+
+ return status;
+}
+
+void ide_outb(int device, int port, unsigned char val)
+{
+ typedef enum send_method {
+ SEND_NONE, SEND_SIMPLE, SEND_CMD, SEND_CTL,
+ } send_method_t;
+
+ /* Only permit accesses to disks found to be present during ide_preinit() */
+ if (!disk_present[device]) {
+ return;
+ }
+
+ // printf("outb: %d:%01x <= %02x\n", device, port, val);
+
+ device_select(device);
+
+#ifdef CONFIG_LBA48
+ if (port >= OUT_HISTORY_BASE && port <= OUT_HISTORY_MAX) {
+ out_history[0][port - OUT_HISTORY_BASE] =
+ out_history[1][port - OUT_HISTORY_BASE];
+ out_history[1][port - OUT_HISTORY_BASE] = val;
+ }
+#endif
+ send_method_t send_regs = SEND_NONE;
+ switch (port) {
+ case ATA_PORT_CTL:
+ wr_sata_orb4[device] &= ~(0xFFUL << SATA_CTL_BIT);
+ wr_sata_orb4[device] |= (val << SATA_CTL_BIT);
+ send_regs = SEND_CTL;
+ break;
+ case ATA_PORT_FEATURE:
+ wr_sata_orb2[device] &= ~(0xFFUL << SATA_FEATURE_BIT);
+ wr_sata_orb2[device] |= (val << SATA_FEATURE_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_NSECT:
+ wr_sata_orb2[device] &= ~(0xFFUL << SATA_NSECT_BIT);
+ wr_sata_orb2[device] |= (val << SATA_NSECT_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_LBAL:
+ wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAL_BIT);
+ wr_sata_orb3[device] |= (val << SATA_LBAL_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_LBAM:
+ wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAM_BIT);
+ wr_sata_orb3[device] |= (val << SATA_LBAM_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_LBAH:
+ wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAH_BIT);
+ wr_sata_orb3[device] |= (val << SATA_LBAH_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_DEVICE:
+ wr_sata_orb1[device] &= ~(0xFFUL << SATA_DEVICE_BIT);
+ wr_sata_orb1[device] |= (val << SATA_DEVICE_BIT);
+ send_regs = SEND_SIMPLE;
+ break;
+ case ATA_PORT_COMMAND:
+ wr_sata_orb2[device] &= ~(0xFFUL << SATA_COMMAND_BIT);
+ wr_sata_orb2[device] |= (val << SATA_COMMAND_BIT);
+ send_regs = SEND_CMD;
+#ifdef CONFIG_LBA48
+ if (val == ATA_CMD_READ_EXT || val == ATA_CMD_WRITE_EXT)
+ {
+ /* fill high bytes of LBA48 && NSECT */
+ wr_sata_orb2[device] &= ~(0xFFUL << SATA_HOB_NSECT_BIT);
+ wr_sata_orb2[device] |=
+ (out_history[0][ATA_PORT_NSECT - OUT_HISTORY_BASE] << SATA_HOB_NSECT_BIT);
+
+ wr_sata_orb3[device] &= ~(0xFFUL << SATA_HOB_LBAH_BIT);
+ wr_sata_orb3[device] |=
+ (out_history[0][ATA_PORT_LBAL - OUT_HISTORY_BASE] << SATA_HOB_LBAH_BIT);
+
+ wr_sata_orb4[device] &= ~(0xFFUL << SATA_LBA32_BIT);
+ wr_sata_orb4[device] |=
+ (out_history[0][ATA_PORT_LBAM - OUT_HISTORY_BASE] << SATA_LBA32_BIT);
+
+ wr_sata_orb4[device] &= ~(0xFFUL << SATA_LBA40_BIT);
+ wr_sata_orb4[device] |=
+ (out_history[0][ATA_PORT_LBAH - OUT_HISTORY_BASE] << SATA_LBA40_BIT);
+ }
+#endif
+ break;
+ default:
+ printf("ide_outb() Unknown port = %d\n", port);
+ }
+
+ u32 command;
+ switch (send_regs) {
+ case SEND_CMD:
+ wait_sata_command_not_busy(device);
+ command = *(sata_regs_base[device] + SATA_COMMAND_OFF);
+ command &= ~SATA_OPCODE_MASK;
+ command |= SATA_CMD_WRITE_TO_ORB_REGS;
+ xfer_wr_shadow_to_orbs(device);
+ wait_sata_command_not_busy(device);
+ *(sata_regs_base[device] + SATA_COMMAND_OFF) = command;
+ if (!wait_no_error(device)) {
+ printf("ide_outb() Wait for ATA no-error timed-out\n");
+ }
+ break;
+ case SEND_CTL:
+ wait_sata_command_not_busy(device);
+ command = *(sata_regs_base[device] + SATA_COMMAND_OFF);
+ command &= ~SATA_OPCODE_MASK;
+ command |= SATA_CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
+ xfer_wr_shadow_to_orbs(device);
+ wait_sata_command_not_busy(device);
+ *(sata_regs_base[device] + SATA_COMMAND_OFF) = command;
+ if (!wait_no_error(device)) {
+ printf("ide_outb() Wait for ATA no-error timed-out\n");
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static u32 encode_start(u32 ctrl_status)
+{
+ return ctrl_status & ~DMA_CTRL_STATUS_PAUSE;
+}
+
+/* start a paused DMA transfer in channel 0 of the SATA DMA core */
+static void dma_start(void)
+{
+ unsigned int reg;
+ reg = readl(SATA_DMA_REGS_BASE + DMA_CTRL_STATUS);
+ reg = encode_start(reg);
+ writel(reg, SATA_DMA_REGS_BASE + DMA_CTRL_STATUS);
+}
+
+static unsigned long encode_control_status(
+ oxnas_dma_device_settings_t* src_settings,
+ oxnas_dma_device_settings_t* dst_settings)
+{
+ unsigned long ctrl_status;
+ oxnas_dma_transfer_direction_t direction;
+
+ ctrl_status = DMA_CTRL_STATUS_PAUSE; // Paused
+ ctrl_status |= DMA_CTRL_STATUS_FAIR_SHARE_ARB; // High priority
+ ctrl_status |= (src_settings->dreq_ << DMA_CTRL_STATUS_SRC_DREQ_SHIFT); // Dreq
+ ctrl_status |= (dst_settings->dreq_ << DMA_CTRL_STATUS_DEST_DREQ_SHIFT); // Dreq
+ ctrl_status &= ~DMA_CTRL_STATUS_RESET; // !RESET
+
+ // Use new interrupt clearing register
+ ctrl_status |= DMA_CTRL_STATUS_INTR_CLEAR_ENABLE;
+
+ // Setup the transfer direction and burst/single mode for the two DMA busses
+ if (src_settings->bus_ == OXNAS_DMA_SIDE_A) {
+ // Set the burst/single mode for bus A based on src device's settings
+ if (src_settings->transfer_mode_
+ == OXNAS_DMA_TRANSFER_MODE_BURST) {
+ ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_A;
+ } else {
+ ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_A;
+ }
+
+ if (dst_settings->bus_ == OXNAS_DMA_SIDE_A) {
+ direction = OXNAS_DMA_A_TO_A;
+ } else {
+ direction = OXNAS_DMA_A_TO_B;
+
+ // Set the burst/single mode for bus B based on dst device's settings
+ if (dst_settings->transfer_mode_
+ == OXNAS_DMA_TRANSFER_MODE_BURST) {
+ ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_B;
+ } else {
+ ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_B;
+ }
+ }
+ } else {
+ // Set the burst/single mode for bus B based on src device's settings
+ if (src_settings->transfer_mode_
+ == OXNAS_DMA_TRANSFER_MODE_BURST) {
+ ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_B;
+ } else {
+ ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_B;
+ }
+
+ if (dst_settings->bus_ == OXNAS_DMA_SIDE_A) {
+ direction = OXNAS_DMA_B_TO_A;
+
+ // Set the burst/single mode for bus A based on dst device's settings
+ if (dst_settings->transfer_mode_
+ == OXNAS_DMA_TRANSFER_MODE_BURST) {
+ ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_A;
+ } else {
+ ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_A;
+ }
+ } else {
+ direction = OXNAS_DMA_B_TO_B;
+ }
+ }
+ ctrl_status |= (direction << DMA_CTRL_STATUS_DIR_SHIFT);
+
+ // Setup source address mode fixed or increment
+ if (src_settings->address_mode_ == OXNAS_DMA_MODE_FIXED) {
+ // Fixed address
+ ctrl_status &= ~(DMA_CTRL_STATUS_SRC_ADR_MODE);
+
+ // Set up whether fixed address is _really_ fixed
+ if (src_settings->address_really_fixed_) {
+ ctrl_status |= DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED;
+ } else {
+ ctrl_status &= ~DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED;
+ }
+ } else {
+ // Incrementing address
+ ctrl_status |= DMA_CTRL_STATUS_SRC_ADR_MODE;
+ ctrl_status &= ~DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED;
+ }
+
+ // Setup destination address mode fixed or increment
+ if (dst_settings->address_mode_ == OXNAS_DMA_MODE_FIXED) {
+ // Fixed address
+ ctrl_status &= ~(DMA_CTRL_STATUS_DEST_ADR_MODE);
+
+ // Set up whether fixed address is _really_ fixed
+ if (dst_settings->address_really_fixed_) {
+ ctrl_status |=
+ DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED;
+ } else {
+ ctrl_status &=
+ ~DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED;
+ }
+ } else {
+ // Incrementing address
+ ctrl_status |= DMA_CTRL_STATUS_DEST_ADR_MODE;
+ ctrl_status &= ~DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED;
+ }
+
+ // Set up the width of the transfers on the DMA buses
+ ctrl_status |=
+ (src_settings->width_ << DMA_CTRL_STATUS_SRC_WIDTH_SHIFT);
+ ctrl_status |=
+ (dst_settings->width_ << DMA_CTRL_STATUS_DEST_WIDTH_SHIFT);
+
+ // Setup the priority arbitration scheme
+ ctrl_status &= ~DMA_CTRL_STATUS_STARVE_LOW_PRIORITY; // !Starve low priority
+
+ return ctrl_status;
+}
+
+static u32 encode_final_eot(oxnas_dma_device_settings_t* src_settings,
+ oxnas_dma_device_settings_t* dst_settings,
+ unsigned long length)
+{
+ // Write the length, with EOT configuration for a final transfer
+ unsigned long encoded = length;
+ if (dst_settings->write_final_eot_) {
+ encoded |= DMA_BYTE_CNT_WR_EOT_MASK;
+ } else {
+ encoded &= ~DMA_BYTE_CNT_WR_EOT_MASK;
+ }
+ if (src_settings->read_final_eot_) {
+ encoded |= DMA_BYTE_CNT_RD_EOT_MASK;
+ } else {
+ encoded &= ~DMA_BYTE_CNT_RD_EOT_MASK;
+ }
+ /* if((src_settings->transfer_mode_) ||
+ (src_settings->transfer_mode_)) {
+ encoded |= DMA_BYTE_CNT_BURST_MASK;
+ } else {
+ encoded &= ~DMA_BYTE_CNT_BURST_MASK;
+ }*/
+ return encoded;
+}
+
+static void dma_start_write(const ulong* buffer, int num_bytes)
+{
+ // Assemble complete memory settings
+ oxnas_dma_device_settings_t mem_settings = oxnas_ram_dma_settings;
+ mem_settings.address_ = (unsigned long) buffer;
+ mem_settings.address_mode_ = OXNAS_DMA_MODE_INC;
+
+ writel(encode_control_status(&mem_settings, &oxnas_sata_dma_settings),
+ SATA_DMA_REGS_BASE + DMA_CTRL_STATUS);
+ writel(mem_settings.address_, SATA_DMA_REGS_BASE + DMA_BASE_SRC_ADR);
+ writel(oxnas_sata_dma_settings.address_,
+ SATA_DMA_REGS_BASE + DMA_BASE_DST_ADR);
+ writel(encode_final_eot(&mem_settings, &oxnas_sata_dma_settings,
+ num_bytes),
+ SATA_DMA_REGS_BASE + DMA_BYTE_CNT);
+
+ dma_start();
+}
+
+static void dma_start_read(ulong* buffer, int num_bytes)
+{
+ // Assemble complete memory settings
+ oxnas_dma_device_settings_t mem_settings = oxnas_ram_dma_settings;
+ mem_settings.address_ = (unsigned long) buffer;
+ mem_settings.address_mode_ = OXNAS_DMA_MODE_INC;
+
+ writel(encode_control_status(&oxnas_sata_dma_settings, &mem_settings),
+ SATA_DMA_REGS_BASE + DMA_CTRL_STATUS);
+ writel(oxnas_sata_dma_settings.address_,
+ SATA_DMA_REGS_BASE + DMA_BASE_SRC_ADR);
+ writel(mem_settings.address_, SATA_DMA_REGS_BASE + DMA_BASE_DST_ADR);
+ writel(encode_final_eot(&oxnas_sata_dma_settings, &mem_settings,
+ num_bytes),
+ SATA_DMA_REGS_BASE + DMA_BYTE_CNT);
+
+ dma_start();
+}
+
+static inline int dma_busy(void)
+{
+ return readl(SATA_DMA_REGS_BASE + DMA_CTRL_STATUS)
+ & DMA_CTRL_STATUS_IN_PROGRESS;
+}
+
+static int wait_dma_not_busy(int device)
+{
+ unsigned int cleanup_required = 0;
+
+ /* Poll for DMA completion */
+ int loops = MAX_DMA_XFER_LOOPS;
+ do {
+ if (!dma_busy()) {
+ break;
+ }
+ udelay(100);
+ } while (--loops);
+
+ if (!loops) {
+ printf("wait_dma_not_busy() Timed out of wait for DMA not busy\n");
+ cleanup_required = 1;
+ }
+
+ if (cleanup_required) {
+ /* Abort DMA to make sure it has finished. */
+ unsigned int ctrl_status = readl(
+ SATA_DMA_CHANNEL + DMA_CTRL_STATUS);
+ ctrl_status |= DMA_CTRL_STATUS_RESET;
+ writel(ctrl_status, SATA_DMA_CHANNEL + DMA_CTRL_STATUS);
+
+ // Wait for the channel to become idle - should be quick as should
+ // finish after the next AHB single or burst transfer
+ loops = MAX_DMA_ABORT_LOOPS;
+ do {
+ if (!dma_busy()) {
+ break;
+ }
+ udelay(10);
+ } while (--loops);
+
+ if (!loops) {
+ printf("wait_dma_not_busy() Timed out of wait for DMA channel abort\n");
+ } else {
+ /* Successfully cleanup the DMA channel */
+ cleanup_required = 0;
+ }
+
+ // Deassert reset for the channel
+ ctrl_status = readl(SATA_DMA_CHANNEL + DMA_CTRL_STATUS);
+ ctrl_status &= ~DMA_CTRL_STATUS_RESET;
+ writel(ctrl_status, SATA_DMA_CHANNEL + DMA_CTRL_STATUS);
+ }
+
+ return !cleanup_required;
+}
+
+/**
+ * Possible that ATA status will not become not-busy, so must have timeout
+ */
+static unsigned int wait_not_busy(int device, unsigned long timeout_secs)
+{
+ int busy = 1;
+ unsigned long loops = (timeout_secs * 1000) / 50;
+ do {
+ // Test the ATA status register BUSY flag
+ if (!((*(sata_regs_base[device] + SATA_ORB2_OFF)
+ >> SATA_COMMAND_BIT) & (1UL << ATA_STATUS_BSY_BIT))) {
+ /* Not busy, so stop polling */
+ busy = 0;
+ break;
+ }
+
+ // Wait for 50mS before sampling ATA status register again
+ udelay(50000);
+ } while (--loops);
+
+ return busy;
+}
+
+void ide_output_data(int device, const ulong *sect_buf, int words)
+{
+ /* Only permit accesses to disks found to be present during ide_preinit() */
+ if (!disk_present[device]) {
+ return;
+ }
+
+ /* Select the required internal SATA drive */
+ device_select(device);
+
+ /* Start the DMA channel sending data from the passed buffer to the SATA core */
+ dma_start_write(sect_buf, words << 2);
+
+ /* Don't know why we need this delay, but without it the wait for DMA not
+ busy times soemtimes out, e.g. when saving environment to second disk */
+ udelay(1000);
+
+ /* Wait for DMA to finish */
+ if (!wait_dma_not_busy(device)) {
+ printf("Timed out of wait for DMA channel for SATA device %d to have in-progress clear\n",
+ device);
+ }
+
+ /* Sata core should finish after DMA */
+ if (wait_not_busy(device, 30)) {
+ printf("Timed out of wait for SATA device %d to have BUSY clear\n",
+ device);
+ }
+ if (!wait_no_error(device)) {
+ printf("oxnas_sata_output_data() Wait for ATA no-error timed-out\n");
+ }
+}
+
+
+#define SATA_DM_DBG1 (SATA_HOST_REGS_BASE + 0)
+#define SATA_DATACOUNT_PORT0 (SATA_HOST_REGS_BASE + 0x10)
+#define SATA_DATACOUNT_PORT1 (SATA_HOST_REGS_BASE + 0x14)
+#define SATA_DATA_MUX_RAM0 (SATA_HOST_REGS_BASE + 0x8000)
+#define SATA_DATA_MUX_RAM1 (SATA_HOST_REGS_BASE + 0xA000)
+/* Sata core debug1 register bits */
+#define SATA_CORE_PORT0_DATA_DIR_BIT 20
+#define SATA_CORE_PORT1_DATA_DIR_BIT 21
+#define SATA_CORE_PORT0_DATA_DIR (1 << SATA_CORE_PORT0_DATA_DIR_BIT)
+#define SATA_CORE_PORT1_DATA_DIR (1 << SATA_CORE_PORT1_DATA_DIR_BIT)
+
+/**
+ * Ref bug-6320
+ *
+ * This code is a work around for a DMA hardware bug that will repeat the
+ * penultimate 8-bytes on some reads. This code will check that the amount
+ * of data transferred is a multiple of 512 bytes, if not the in it will
+ * fetch the correct data from a buffer in the SATA core and copy it into
+ * memory.
+ *
+ */
+static void sata_bug_6320_workaround(int port, ulong *candidate)
+{
+ int is_read;
+ int quads_transferred;
+ int remainder;
+ int sector_quads_remaining;
+
+ /* Only want to apply fix to reads */
+ is_read = !(*((unsigned long*) SATA_DM_DBG1)
+ & (port ? SATA_CORE_PORT1_DATA_DIR : SATA_CORE_PORT0_DATA_DIR));
+
+ /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes
+ transferred (datacount_port register counts quads transferred) */
+ quads_transferred = *((unsigned long*) (
+ port ? SATA_DATACOUNT_PORT1 : SATA_DATACOUNT_PORT0));
+
+ remainder = quads_transferred & 0x7f;
+ sector_quads_remaining = remainder ? (0x80 - remainder) : 0;
+
+ if (is_read && (sector_quads_remaining == 2)) {
+ debug("SATA read fixup, only transfered %d quads, "
+ "sector_quads_remaining %d, port %d\n",
+ quads_transferred, sector_quads_remaining, port);
+
+ int total_len = ATA_SECT_SIZE;
+ ulong *sata_data_ptr = (void*) (
+ port ? SATA_DATA_MUX_RAM1 : SATA_DATA_MUX_RAM0)
+ + ((total_len - 8) % 2048);
+
+ *candidate = *sata_data_ptr;
+ *(candidate + 1) = *(sata_data_ptr + 1);
+ }
+}
+
+
+void ide_input_data(int device, ulong *sect_buf, int words)
+{
+ /* Only permit accesses to disks found to be present during ide_preinit() */
+ if (!disk_present[device]) {
+ return;
+ }
+
+ /* Select the required internal SATA drive */
+ device_select(device);
+
+ /* Start the DMA channel receiving data from the SATA core into the passed buffer */
+ dma_start_read(sect_buf, words << 2);
+
+ /* Sata core should finish before DMA */
+ if (wait_not_busy(device, 30)) {
+ printf("Timed out of wait for SATA device %d to have BUSY clear\n",
+ device);
+ }
+ if (!wait_no_error(device)) {
+ printf("oxnas_sata_output_data() Wait for ATA no-error timed-out\n");
+ }
+
+ /* Wait for DMA to finish */
+ if (!wait_dma_not_busy(device)) {
+ printf("Timed out of wait for DMA channel for SATA device %d to have in-progress clear\n",
+ device);
+ }
+
+ if (words == ATA_SECTORWORDS)
+ sata_bug_6320_workaround(device, sect_buf + words - 2);
+}
+
+static u32 scr_read(int device, unsigned int sc_reg)
+{
+ /* Setup adr of required register. std regs start eight into async region */
+ *(sata_regs_base[device] + SATA_LINK_RD_ADDR) = sc_reg
+ * 4+ SATA_STD_ASYNC_REGS_OFF;
+
+ /* Wait for data to be available */
+ int loops = MAX_SRC_READ_LOOPS;
+ do {
+ if (*(sata_regs_base[device] + SATA_LINK_CONTROL) & 1UL) {
+ break;
+ }
+ udelay(10);
+ } while (--loops);
+
+ if (!loops) {
+ printf("scr_read() Timed out of wait for read completion\n");
+ }
+
+ /* Read the data from the async register */
+ return *(sata_regs_base[device] + SATA_LINK_DATA);
+}
+
+static void scr_write(int device, unsigned int sc_reg, u32 val)
+{
+ /* Setup the data for the write */
+ *(sata_regs_base[device] + SATA_LINK_DATA) = val;
+
+ /* Setup adr of required register. std regs start eight into async region */
+ *(sata_regs_base[device] + SATA_LINK_WR_ADDR) = sc_reg
+ * 4+ SATA_STD_ASYNC_REGS_OFF;
+
+ /* Wait for data to be written */
+ int loops = MAX_SRC_WRITE_LOOPS;
+ do {
+ if (*(sata_regs_base[device] + SATA_LINK_CONTROL) & 1UL) {
+ break;
+ }
+ udelay(10);
+ } while (--loops);
+
+ if (!loops) {
+ printf("scr_write() Timed out of wait for write completion\n");
+ }
+}
+extern void workaround5458(void);
+
+#define PHY_LOOP_COUNT 25 /* Wait for upto 5 seconds for PHY to be found */
+#define LOS_AND_TX_LVL 0x2988
+#define TX_ATTEN 0x55629
+
+static int phy_reset(int device)
+{
+ int phy_status = 0;
+ int loops = 0;
+
+ scr_write(device, (0x60 - SATA_STD_ASYNC_REGS_OFF) / 4, LOS_AND_TX_LVL);
+ scr_write(device, (0x70 - SATA_STD_ASYNC_REGS_OFF) / 4, TX_ATTEN);
+
+ /* limit it to Gen-1 SATA (1.5G) */
+ scr_write(device, SATA_SCR_CONTROL, 0x311); /* Issue phy wake & core reset */
+ scr_read(device, SATA_SCR_STATUS); /* Dummy read; flush */
+ udelay(1000);
+ scr_write(device, SATA_SCR_CONTROL, 0x310); /* Issue phy wake & clear core reset */
+
+ /* Wait for upto 5 seconds for PHY to become ready */
+ do {
+ udelay(200000);
+ if ((scr_read(device, SATA_SCR_STATUS) & 0xf) == 3) {
+ scr_write(device, SATA_SCR_ERROR, ~0);
+ phy_status = 1;
+ break;
+ }
+ //printf("No SATA PHY found status:0x%x\n", scr_read(device, SATA_SCR_STATUS));
+ } while (++loops < PHY_LOOP_COUNT);
+
+ if (phy_status) {
+ udelay(500000); /* wait half a second */
+ }
+
+ return phy_status;
+}
+
+#define FIS_LOOP_COUNT 25 /* Wait for upto 5 seconds for FIS to be received */
+static int wait_FIS(int device)
+{
+ int status = 0;
+ int loops = 0;
+
+ do {
+ udelay(200000);
+ if (ide_inb(device, ATA_PORT_NSECT) > 0) {
+ status = 1;
+ break;
+ }
+ } while (++loops < FIS_LOOP_COUNT);
+
+ return status;
+}
+
+
+#define SATA_PHY_ASIC_STAT (0x44900000)
+#define SATA_PHY_ASIC_DATA (0x44900004)
+
+/**
+ * initialise functions and macros for ASIC implementation
+ */
+#define PH_GAIN 2
+#define FR_GAIN 3
+#define PH_GAIN_OFFSET 6
+#define FR_GAIN_OFFSET 8
+#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET)
+#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET)
+#define USE_INT_SETTING (1<<5)
+
+#define CR_READ_ENABLE (1<<16)
+#define CR_WRITE_ENABLE (1<<17)
+#define CR_CAP_DATA (1<<18)
+
+static void wait_cr_ack(void)
+{
+ while ((readl(SATA_PHY_ASIC_STAT) >> 16) & 0x1f)
+ /* wait for an ack bit to be set */;
+}
+
+static unsigned short read_cr(unsigned short address)
+{
+ writel(address, SATA_PHY_ASIC_STAT);
+ wait_cr_ack();
+ writel(CR_READ_ENABLE, SATA_PHY_ASIC_DATA);
+ wait_cr_ack();
+ return readl(SATA_PHY_ASIC_STAT);
+}
+
+static void write_cr(unsigned short data, unsigned short address)
+{
+ writel(address, SATA_PHY_ASIC_STAT);
+ wait_cr_ack();
+ writel((data | CR_CAP_DATA), SATA_PHY_ASIC_DATA);
+ wait_cr_ack();
+ writel(CR_WRITE_ENABLE, SATA_PHY_ASIC_DATA);
+ wait_cr_ack();
+ return;
+}
+
+void workaround5458(void)
+{
+ unsigned i;
+
+ for (i = 0; i < 2; i++) {
+ unsigned short rx_control = read_cr(0x201d + (i << 8));
+ rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK);
+ rx_control |= PH_GAIN << PH_GAIN_OFFSET;
+ rx_control |= FR_GAIN << FR_GAIN_OFFSET;
+ rx_control |= USE_INT_SETTING;
+ write_cr(rx_control, 0x201d + (i << 8));
+ }
+}
+
+int ide_preinit(void)
+{
+ int num_disks_found = 0;
+
+ /* Initialise records of which disks are present to all present */
+ int i;
+ for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) {
+ disk_present[i] = 1;
+ }
+
+ /* Block reset SATA and DMA cores */
+ reset_block(SYS_CTRL_RST_SATA, 1);
+ reset_block(SYS_CTRL_RST_SATA_LINK, 1);
+ reset_block(SYS_CTRL_RST_SATA_PHY, 1);
+ reset_block(SYS_CTRL_RST_SGDMA, 1);
+
+ /* Enable clocks to SATA and DMA cores */
+ enable_clock(SYS_CTRL_CLK_SATA);
+ enable_clock(SYS_CTRL_CLK_DMA);
+
+ udelay(5000);
+ reset_block(SYS_CTRL_RST_SATA_PHY, 0);
+ udelay(50);
+ reset_block(SYS_CTRL_RST_SATA, 0);
+ reset_block(SYS_CTRL_RST_SATA_LINK, 0);
+ udelay(50);
+ reset_block(SYS_CTRL_RST_SGDMA, 0);
+ udelay(100);
+ /* Apply the Synopsis SATA PHY workarounds */
+ workaround5458();
+ udelay(10000);
+
+ /* disable and clear core interrupts */
+ *((unsigned long*) SATA_HOST_REGS_BASE + SATA_INT_ENABLE_CLR_OFF) =
+ ~0UL;
+ *((unsigned long*) SATA_HOST_REGS_BASE + SATA_INT_CLR_OFF) = ~0UL;
+
+ int device;
+ for (device = 0; device < CONFIG_SYS_IDE_MAXDEVICE; device++) {
+ int found = 0;
+ int retries = 1;
+
+ /* Disable SATA interrupts */
+ *(sata_regs_base[device] + SATA_INT_ENABLE_CLR_OFF) = ~0UL;
+
+ /* Clear any pending SATA interrupts */
+ *(sata_regs_base[device] + SATA_INT_CLR_OFF) = ~0UL;
+
+ do {
+ /* clear sector count register for FIS detection */
+ ide_outb(device, ATA_PORT_NSECT, 0);
+
+ /* Get the PHY working */
+ if (!phy_reset(device)) {
+ printf("SATA PHY not ready for device %d\n",
+ device);
+ break;
+ }
+
+ if (!wait_FIS(device)) {
+ printf("No FIS received from device %d\n",
+ device);
+ } else {
+ if ((scr_read(device, SATA_SCR_STATUS) & 0xf)
+ == 0x3) {
+ if (wait_not_busy(device, 30)) {
+ printf("Timed out of wait for SATA device %d to have BUSY clear\n",
+ device);
+ } else {
+ ++num_disks_found;
+ found = 1;
+ }
+ } else {
+ printf("No SATA device %d found, PHY status = 0x%08x\n",
+ device,
+ scr_read(
+ device,
+ SATA_SCR_STATUS));
+ }
+ break;
+ }
+ } while (retries--);
+
+ /* Record whether disk is present, so won't attempt to access it later */
+ disk_present[device] = found;
+ }
+
+ /* post disk detection clean-up */
+ for (device = 0; device < CONFIG_SYS_IDE_MAXDEVICE; device++) {
+ if (disk_present[device]) {
+ /* set as ata-5 (28-bit) */
+ *(sata_regs_base[device] + SATA_DRIVE_CONTROL_OFF) =
+ 0UL;
+
+ /* clear phy/link errors */
+ scr_write(device, SATA_SCR_ERROR, ~0);
+
+ /* clear host errors */
+ *(sata_regs_base[device] + SATA_CONTROL_OFF) |=
+ SATA_SCTL_CLR_ERR;
+
+ /* clear interrupt register as this clears the error bit in the IDE
+ status register */
+ *(sata_regs_base[device] + SATA_INT_CLR_OFF) = ~0UL;
+ }
+ }
+
+ return !num_disks_found;
+}
+
diff --git a/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c b/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c
new file mode 100644
index 0000000..6ab05c5
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/drivers/usb/host/ehci-oxnas.c
@@ -0,0 +1,105 @@
+/*
+ * drivers/usb/host/ehci-oxnas.c
+ *
+ * Tzachi Perelstein <tzachi at marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sysctl.h>
+#include <asm/arch/clock.h>
+
+#include "ehci.h"
+
+static struct ehci_hcor *ghcor;
+
+static int start_oxnas_usb_ehci(void)
+{
+#ifdef CONFIG_USB_PLLB_CLK
+ reset_block(SYS_CTRL_RST_PLLB, 0);
+ enable_clock(SYS_CTRL_CLK_REF600);
+
+ writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
+ SEC_CTRL_PLLB_CTRL0);
+ /* 600MHz pllb divider for 12MHz */
+ writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), SEC_CTRL_PLLB_DIV_CTRL);
+#else
+ /* ref 300 divider for 12MHz */
+ writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), SYS_CTRL_REF300_DIV);
+#endif
+
+ /* Ensure the USB block is properly reset */
+ reset_block(SYS_CTRL_RST_USBHS, 1);
+ reset_block(SYS_CTRL_RST_USBHS, 0);
+
+ reset_block(SYS_CTRL_RST_USBHSPHYA, 1);
+ reset_block(SYS_CTRL_RST_USBHSPHYA, 0);
+
+ reset_block(SYS_CTRL_RST_USBHSPHYB, 1);
+ reset_block(SYS_CTRL_RST_USBHSPHYB, 0);
+
+ /* Force the high speed clock to be generated all the time, via serial
+ programming of the USB HS PHY */
+ writel((2UL << USBHSPHY_TEST_ADD) |
+ (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((1UL << USBHSPHY_TEST_CLK) |
+ (2UL << USBHSPHY_TEST_ADD) |
+ (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((0xfUL << USBHSPHY_TEST_ADD) |
+ (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+ writel((1UL << USBHSPHY_TEST_CLK) |
+ (0xfUL << USBHSPHY_TEST_ADD) |
+ (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
+
+#ifdef CONFIG_USB_PLLB_CLK /* use pllb clock */
+ writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
+#else /* use ref300 derived clock */
+ writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, SYS_CTRL_USB_CTRL);
+#endif
+ /* Enable the clock to the USB block */
+ enable_clock(SYS_CTRL_CLK_USBHS);
+
+ return 0;
+}
+int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr,
+ struct ehci_hcor **hcor)
+{
+ start_oxnas_usb_ehci();
+ *hccr = (struct ehci_hccr *)(USB_HOST_BASE + 0x100);
+ *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ ghcor = *hcor;
+ return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+ reset_block(SYS_CTRL_RST_USBHS, 1);
+ disable_clock(SYS_CTRL_CLK_USBHS);
+ return 0;
+}
+
+extern void __ehci_set_usbmode(int index);
+void ehci_set_usbmode(int index)
+{
+ #define or_txttfill_tuning _reserved_1_[0]
+ u32 tmp;
+
+ __ehci_set_usbmode(index);
+
+ tmp = ehci_readl(&ghcor->or_txfilltuning);
+ tmp &= ~0x00ff0000;
+ tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */
+ tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
+ ehci_writel(&ghcor->or_txfilltuning, tmp);
+
+ tmp = ehci_readl(&ghcor->or_txttfill_tuning);
+ tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
+ ehci_writel(&ghcor->or_txttfill_tuning, tmp);
+}
diff --git a/package/boot/uboot-oxnas/files/include/configs/ox820.h b/package/boot/uboot-oxnas/files/include/configs/ox820.h
new file mode 100644
index 0000000..7ade1dc
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/include/configs/ox820.h
@@ -0,0 +1,381 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_ARM1136
+#define CONFIG_OX820
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+/* make cmd_ide.c quiet when compile */
+#define __io
+
+/*#define CONFIG_ARCH_CPU_INIT*/
+/*#define CONFIG_DISPLAY_CPUINFO*/
+/*#define CONFIG_DISPLAY_BOARDINFO*/
+/*#define CONFIG_BOARD_EARLY_INIT_F*/
+/*#define CONFIG_SKIP_LOWLEVEL_INIT*/
+
+/* mem */
+#define CONFIG_SYS_SDRAM_BASE 0x60000000
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_MIN_SDRAM_SIZE (128 * 1024 * 1024) /* 128 MB */
+#define CONFIG_MAX_SDRAM_SIZE (512 * 1024 * 1024) /* 512 MB */
+#define CONFIG_SRAM_BASE 0x50000000
+#define CONFIG_SRAM_SIZE (64 * 1024)
+
+/* need do dma so better keep dcache off */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* clock */
+#define CONFIG_PLLA_FREQ_MHZ 800
+#define CONFIG_RPSCLK 6250000
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK_FREQ CONFIG_RPSCLK
+#define CONFIG_SYS_TIMERBASE TIMER1_BASE
+#define CONFIG_TIMER_PRESCALE TIMER_PRESCALE_16
+
+/* serial */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_CLK CONFIG_RPSCLK
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_NS16550_COM1 UART_1_BASE
+#define CONFIG_CONS_INDEX 1
+
+/* ide */
+#define CONFIG_SYS_ATA_BASE_ADDR 0
+#define CONFIG_SYS_ATA_DATA_OFFSET 0
+#define CONFIG_SYS_ATA_REG_OFFSET 0
+#define CONFIG_SYS_ATA_ALT_OFFSET 0
+#define CONFIG_IDE_PLX
+#define CONFIG_SYS_IDE_MAXDEVICE 1
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_IDE_PREINIT
+#define CONFIG_LBA48
+
+/* nand */
+#define CONFIG_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE STATIC_CS0_BASE
+#define NAND_CLE_ADDR_PIN 19
+#define NAND_ALE_ADDR_PIN 18
+#define MTDPARTS_DEFAULT "mtdparts=41000000.nand:" \
+ "14m(boot)," \
+ "-(ubi)"
+#define MTDIDS_DEFAULT "nand0=41000000.nand"
+#define UBIPART_DEFAULT "ubi"
+
+/* net */
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_REALTEK
+
+/* spl */
+#ifdef CONFIG_SPL_BUILD
+#define USE_DL_PREFIX /* rename malloc free etc, so we can override them */
+#endif
+
+#if defined(CONFIG_BOOT_FROM_NAND) || defined(CONFIG_BOOT_FROM_SATA)
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_TEXT_BASE 0x50000000
+#define CONFIG_SPL_STACK (CONFIG_SRAM_BASE + (48 * 1024))
+#define CONFIG_SPL_DISPLAY_PRINT
+#define CONFIG_SPL_BSS_DRAM_START 0x65000000
+#define CONFIG_SPL_BSS_DRAM_SIZE 0x01000000
+#define CONFIG_SPL_MALLOC_START 0x66000000
+#endif
+
+#if defined(CONFIG_BOOT_FROM_NAND)
+#define CONFIG_SPL_NAND_SUPPORT
+#define BOOT_DEVICE_TYPE "NAND"
+#define BOOT_DEVICE_NAND 0xfeedbacc
+#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_NAND
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_SOFTECC
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 6
+#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
+ 48, 49, 50, 51, 52, 53, 54, 55, \
+ 56, 57, 58, 59, 60, 61, 62, 63}
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+/* pages per erase block */
+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE)
+/* nand spl use 1 erase block, and use bit to byte encode for reliability */
+#define CONFIG_SPL_MAX_SIZE (128 * 1024 / 8)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000
+/* spl kernel load is not enabled */
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000
+#define CONFIG_CMD_SPL_NAND_OFS 0
+#define CONFIG_CMD_SPL_WRITE_SIZE 1024
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+/* CONFIG_BOOT_FROM_NAND end */
+
+#elif defined(CONFIG_BOOT_FROM_SATA)
+#define CONFIG_SPL_BLOCK_SUPPORT
+#define BOOT_DEVICE_TYPE "SATA"
+#define BOOT_DEVICE_BLOCK 860202
+#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_BLOCK
+#define CONFIG_SPL_MAX_SIZE (36 * 1024)
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_BLOCKDEV_INTERFACE "ide"
+#define CONFIG_SPL_BLOCKDEV_ID 0
+
+#ifdef CONFIG_BOOT_FROM_FAT /* u-boot in fat partition */
+
+#define CONFIG_SPL_FAT_SUPPORT
+
+#define CONFIG_BLOCKDEV_FAT_BOOT_PARTITION 1 /* first partition */
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" /* u-boot file name */
+/* enable U-Boot Falcon Mode */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_OS_BOOT
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "bootargs.bin" /* boot parameters */
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "falcon.img" /* kernel */
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+
+#elif CONFIG_BOOT_FROM_EXT4
+
+#define CONFIG_SPL_EXT4_SUPPORT
+#define CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION 1 /* first partition */
+#define CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME "/boot/u-boot.img" /* u-boot file name */
+/* enable U-Boot Falcon Mode */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_OS_BOOT
+#define CONFIG_SPL_EXT4_LOAD_ARGS_NAME "/boot/bootargs.bin" /* boot parameters */
+#define CONFIG_SPL_EXT4_LOAD_KERNEL_NAME "/boot/falcon.img" /* kernel */
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+
+#else /* u-boot in raw sectors */
+
+#define CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR 1024
+/* spl kernel load is not enabled */
+#define CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR 4096
+#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR 0
+#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS (1024 / 512)
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100)
+
+#endif /* CONFIG_BOOT_FROM_FAT */
+/* CONFIG_BOOT_FROM_SATA end */
+
+#else
+/* generic, no spl support */
+#endif
+
+/* boot */
+#define CONFIG_IDENT_STRING " for OXNAS"
+#define CONFIG_MACH_TYPE MACH_TYPE_OXNAS
+#ifndef CONFIG_SPL_BUILD
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+#endif
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_DEFAULT_CONSOLE_PARM "console=ttyS0,115200n8 earlyprintk=serial"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_AUTOLOAD "no"
+
+#define CONFIG_DEFAULT_CONSOLE CONFIG_DEFAULT_CONSOLE_PARM "\0"
+#define CONFIG_BOOTARGS CONFIG_DEFAULT_CONSOLE_PARM
+#define CONFIG_BOOTCOMMAND "run nandboot"
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_RESET_TO_RETRY 60
+
+#define CONFIG_NETCONSOLE
+#define CONFIG_IPADDR 192.168.50.100
+#define CONFIG_SERVERIP 192.168.50.59
+
+/* A sane default configuration...
+ * When booting without a valid environment in ubi, first to loading and booting
+ * the kernel image directly above U-Boot, maybe both were loaded there by
+ * another bootloader.
+ * Also use that same offset (0x90000) to load the rescue image later on (by
+ * adding it onto the flash address where U-Boot is supposed to be stored by
+ * the legacy loader, 0x440000, resulting in offset 0x4d0000 on the flash).
+ * When coming up with a valid environment in ubi, first try to load the
+ * kernel from a ubi volume kernel, if that fails, fallback to the rescue
+ * image stored in boot partition. As a last resort try booting via
+ * DHCP/TFTP.
+ * In case there is no valid environment, first probe for a uimage in ram left
+ * behind by the first bootloader on a tftp boot.
+ * If that fails, switch to normal boot order and save environment.
+ * The loader is supposed to be written to flash at offset 0x440000 and loaded to
+ * RAM at 0x64000000
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "load_kernel_ubi=ubi readvol 0x62000000 kernel;\0" \
+ "load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000;\0" \
+ "load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin;\0" \
+ "boot_kernel=bootm 0x62000000;\0" \
+ "boot_ubi=run load_kernel_ubi && run boot_kernel;\0" \
+ "boot_rescue=run load_kernel_rescue && run boot_kernel;\0" \
+ "boot_dhcp=run load_kernel_dhcp && run boot_kernel;\0" \
+ "normalboot=run boot_ubi; run boot_rescue; run boot_dhcp;\0" \
+ "firstboot=bootm 0x640a0000; setenv bootcmd run normalboot; " \
+ "setenv firstboot; saveenv; run bootcmd; \0" \
+ "bootcmd=run firstboot; \0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
+ "bootargs=" CONFIG_BOOTARGS "\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+
+/* env */
+#if defined(CONFIG_BOOT_FROM_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0x000C0000
+#define CONFIG_ENV_SIZE 0x00020000
+#define CONFIG_ENV_OFFSET_REDUND 0x00100000
+#define CONFIG_ENV_SIZE_REDUND 0x00020000
+#define CONFIG_ENV_RANGE (CONFIG_ENV_SIZE * 2)
+/* CONFIG_BOOT_FROM_NAND end */
+
+#elif defined(CONFIG_BOOT_FROM_SATA)
+#ifdef CONFIG_BOOT_FROM_EXT4
+#define CONFIG_ENV_IS_IN_EXT4
+#define CONFIG_START_IDE
+#define EXT4_ENV_INTERFACE "ide"
+#define EXT4_ENV_DEVICE 0
+#define EXT4_ENV_PART 1
+#define EXT4_ENV_FILE "/boot/u-boot.env"
+#define CONFIG_ENV_SIZE (16 * 1024)
+#else
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_START_IDE
+#define FAT_ENV_INTERFACE "ide"
+#define FAT_ENV_DEVICE 0
+#define FAT_ENV_PART 1
+#define FAT_ENV_FILE "u-boot.env"
+#define CONFIG_ENV_SIZE (16 * 1024)
+#endif
+/* CONFIG_BOOT_FROM_SATA end */
+#elif defined(CONFIG_BOOT_FROM_SATA)
+
+#else
+/* generic */
+#define CONFIG_ENV_IS_IN_UBI 1
+#define CONFIG_ENV_UBI_PART UBIPART_DEFAULT
+#define CONFIG_ENV_UBI_VOLUME "ubootenv"
+#define CONFIG_ENV_UBI_VOLUME_REDUND "ubootenv2"
+#define CONFIG_ENV_SIZE (16 * 1024)
+#endif
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_TEXT_BASE 0x64000000
+#define CONFIG_SYS_INIT_SP_ADDR 0x65000000
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "OX820 # "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/* usb */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_USB_EHCI
+#define CONFIG_EHCI_IS_TDI
+/* #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x3F */
+#define CONFIG_USB_PLLB_CLK
+#define CONFIG_USB_EHCI_OXNAS
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_USB_STORAGE
+#endif
+#define CONFIG_CMD_USB
+
+/* cmds */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_ENV_FLAGS
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PXE
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_EXT4_WRITE
+#endif
+
+#define CONFIG_CMD_ZIP
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_TERMINAL
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_CMD_HASH
+#define CONFIG_CMD_INI
+#define CONFIG_CMD_GETTIME
+#define CONFIG_CMD_BOOTMENU
+#define CONFIG_CMD_ELF
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/* for CONFIG_CMD_MTDPARTS */
+#define CONFIG_MTD_DEVICE
+/* for CONFIG_CMD_UBI */
+#define CONFIG_MTD_PARTITIONS
+/* for CONFIG_CMD_UBI */
+#define CONFIG_RBTREE
+
+/* optional, for CONFIG_CMD_BOOTM & required by CONFIG_CMD_UBIFS */
+#define CONFIG_LZO
+#define CONFIG_LZMA
+#define CONFIG_BZIP2
+
+/* for CONFIG_CMD_ZIP */
+#define CONFIG_GZIP_COMPRESSED
+/* for CONFIG_CMD_MD5SUM */
+#define CONFIG_MD5
+#define CONFIG_MD5SUM_VERIFY
+/* enable CONFIG_CMD_HASH's verification feature */
+#define CONFIG_HASH_VERIFY
+#define CONFIG_REGEX
+/* for CONFIG_CMD_BOOTMENU & CONFIG_CMD_PXE */
+#define CONFIG_MENU
+
+/* for new FIT uImage format generated in OpenWrt */
+#define CONFIG_FIT
+
+#endif /* __CONFIG_H */
diff --git a/package/boot/uboot-oxnas/files/tools/mkox820crc.c b/package/boot/uboot-oxnas/files/tools/mkox820crc.c
new file mode 100644
index 0000000..d100191
--- /dev/null
+++ b/package/boot/uboot-oxnas/files/tools/mkox820crc.c
@@ -0,0 +1,123 @@
+/* J J Larworthy 27 September 2006 */
+
+/* file to read the boot sector of a dis and the loaded image and report
+ * if the boot rom would accept the data as intact and suitable for use
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/errno.h>
+
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+extern uint32_t crc32(uint32_t, const unsigned char *, unsigned int);
+
+#define NUMBER_VECTORS 12
+struct {
+ unsigned int start_vector[NUMBER_VECTORS];
+ char code[4];
+ unsigned int header_length;
+ unsigned int reserved[3];
+ unsigned int length;
+ unsigned int img_CRC;
+ unsigned int CRC;
+} img_header;
+
+void print_usage(void)
+{
+ printf("update_header file.bin\n");
+}
+
+void print_header(void)
+{
+ int i;
+
+ printf("vectors in header\n");
+ for (i = 0; i < NUMBER_VECTORS; i++) {
+ printf("%d:0x%08x\n", i, img_header.start_vector[i]);
+ }
+ printf("length:%8x\nimg_CRC:0x%08x\nHeader CRC:0x%08x\n",
+ img_header.length, img_header.img_CRC, img_header.CRC);
+}
+
+int main(int argc, char **argv)
+{
+ int in_file;
+ int status;
+ int unsigned crc;
+ int file_length;
+ int len;
+
+ struct stat file_stat;
+
+ void *executable;
+
+ in_file = open(argv[1], O_RDWR);
+
+ if (in_file < 0) {
+ printf("failed to open file:%s\n", argv[optind]);
+ return -ENOENT;
+ }
+
+ status = fstat(in_file, &file_stat);
+
+ /* read header and obtain size of image */
+ status = read(in_file, &img_header, sizeof(img_header));
+
+ file_length = file_stat.st_size - sizeof(img_header);
+
+ if (img_header.length != file_length) {
+ printf("size in header:%d, size of file: %d\n",
+ img_header.length, file_length);
+ }
+ img_header.length = file_length;
+
+ /* read working image and CRC */
+ executable = malloc(file_length);
+
+ status = read(in_file, executable, file_length);
+
+ if (status != file_length) {
+ printf("Failed to load image\n");
+ return -ENOENT;
+ }
+
+ /* verify image CRC */
+ crc = crc32(0, (const unsigned char *) executable, img_header.length);
+
+ if (crc != img_header.img_CRC) {
+ printf("New Image CRC:0x%08x, hdr:0x%08x\n", crc,
+ img_header.img_CRC);
+ img_header.img_CRC = crc;
+ }
+ memcpy(img_header.code, "BOOT", 4);
+ img_header.header_length = sizeof(img_header);
+
+ /* check header CRC */
+ crc = crc32(0, (const unsigned char *) &img_header,
+ sizeof(img_header) - sizeof(unsigned int));
+ if (crc != img_header.CRC) {
+ printf("New header CRC - crc:0x%08x hdr:0x%08x\n", crc,
+ img_header.CRC);
+ img_header.CRC = crc;
+ }
+
+ /* re-write the file */
+ status = lseek(in_file, 0, SEEK_SET);
+ if (status != 0) {
+ printf("failed to rewind\n");
+ return 1;
+ }
+ len = write(in_file, &img_header, sizeof(img_header));
+ assert(len == sizeof(img_header));
+ len = write(in_file, executable, file_length);
+ assert(len == file_length);
+ close(in_file);
+
+ return 0;
+}
diff --git a/package/boot/uboot-oxnas/patches/150-spl-block.patch b/package/boot/uboot-oxnas/patches/150-spl-block.patch
new file mode 100644
index 0000000..a258f3f
--- /dev/null
+++ b/package/boot/uboot-oxnas/patches/150-spl-block.patch
@@ -0,0 +1,54 @@
+--- a/common/spl/Makefile
++++ b/common/spl/Makefile
+@@ -19,4 +19,5 @@ obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc
+ obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
+ obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
+ obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o
++obj-$(CONFIG_SPL_BLOCK_SUPPORT) += spl_block.o
+ endif
+--- a/common/spl/spl.c
++++ b/common/spl/spl.c
+@@ -191,6 +191,14 @@ void board_init_r(gd_t *dummy1, ulong du
+ spl_spi_load_image();
+ break;
+ #endif
++#ifdef CONFIG_SPL_BLOCK_SUPPORT
++ case BOOT_DEVICE_BLOCK:
++ {
++ extern void spl_block_load_image(void);
++ spl_block_load_image();
++ break;
++ }
++#endif
+ #ifdef CONFIG_SPL_ETH_SUPPORT
+ case BOOT_DEVICE_CPGMAC:
+ #ifdef CONFIG_SPL_ETH_DEVICE
+--- a/common/cmd_nvedit.c
++++ b/common/cmd_nvedit.c
+@@ -47,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \
+ !defined(CONFIG_ENV_IS_IN_REMOTE) && \
+ !defined(CONFIG_ENV_IS_IN_UBI) && \
++ !defined(CONFIG_ENV_IS_IN_EXT4) && \
+ !defined(CONFIG_ENV_IS_NOWHERE)
+ # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\
+ SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
+--- a/common/Makefile
++++ b/common/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_o
+ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
+ obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
+ obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
++obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o
+ obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
+
+ # command
+@@ -191,6 +192,8 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o
+ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
+ obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
+ obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
++else
++obj-$(CONFIG_SPL_BLOCK_SUPPORT) += cmd_ide.o
+ endif
+
+ ifdef CONFIG_SPL_BUILD
diff --git a/package/boot/uboot-oxnas/patches/300-oxnas-target.patch b/package/boot/uboot-oxnas/patches/300-oxnas-target.patch
new file mode 100644
index 0000000..cfe918d
--- /dev/null
+++ b/package/boot/uboot-oxnas/patches/300-oxnas-target.patch
@@ -0,0 +1,99 @@
+--- a/arch/arm/include/asm/mach-types.h
++++ b/arch/arm/include/asm/mach-types.h
+@@ -212,6 +212,7 @@ extern unsigned int __machine_arch_type;
+ #define MACH_TYPE_EDB9307A 1128
+ #define MACH_TYPE_OMAP_3430SDP 1138
+ #define MACH_TYPE_VSTMS 1140
++#define MACH_TYPE_OXNAS 1152
+ #define MACH_TYPE_MICRO9M 1169
+ #define MACH_TYPE_BUG 1179
+ #define MACH_TYPE_AT91SAM9263EK 1202
+--- a/boards.cfg
++++ b/boards.cfg
+@@ -57,6 +57,11 @@ Active arm arm1136 mx35
+ Active arm arm1136 mx35 - woodburn woodburn_sd woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg -
+ Active arm arm1136 mx35 CarMediaLab - flea3 - Stefano Babic <sbabic at denx.de>
+ Active arm arm1136 mx35 freescale - mx35pdk - Stefano Babic <sbabic at denx.de>
++Active arm arm1136 nas782x - - ox820 - -
++Active arm arm1136 nas782x - nas782x ox820_sata ox820:BOOT_FROM_SATA -
++Active arm arm1136 nas782x - nas782x ox820_fat ox820:BOOT_FROM_SATA,BOOT_FROM_FAT
++Active arm arm1136 nas782x - nas782x ox820_ext4 ox820:BOOT_FROM_SATA,BOOT_FROM_EXT4 -
++Active arm arm1136 nas782x - nas782x ox820_nand ox820:BOOT_FROM_NAND -
+ Active arm arm1176 bcm2835 raspberrypi rpi_b rpi_b - Stephen Warren <swarren at wwwdotorg.org>
+ Active arm arm1176 tnetv107x ti tnetv107xevm tnetv107x_evm - Chan-Taek Park <c-park at ti.com>
+ Active arm arm720t - armltd integrator integratorap_cm720t integratorap:CM720T Linus Walleij <linus.walleij at linaro.org>
+--- a/drivers/block/Makefile
++++ b/drivers/block/Makefile
+@@ -21,3 +21,4 @@ obj-$(CONFIG_IDE_SIL680) += sil680.o
+ obj-$(CONFIG_SANDBOX) += sandbox.o
+ obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
+ obj-$(CONFIG_SYSTEMACE) += systemace.o
++obj-$(CONFIG_IDE_PLX) += plxsata_ide.o
+--- a/drivers/serial/serial_ns16550.c
++++ b/drivers/serial/serial_ns16550.c
+@@ -135,6 +135,14 @@ static int calc_divisor (NS16550_t port)
+ }
+ #endif
+
++#ifdef CONFIG_OX820
++ {
++ /* with additional 3 bit fractional */
++ u32 div = (CONFIG_SYS_NS16550_CLK + gd->baudrate) / (gd->baudrate * 2);
++ port->reg9 = (div & 7) << 5;
++ return (div >> 3);
++ }
++#endif
+ #define MODE_X_DIV 16
+ /* Compute divisor value. Normally, we should simply return:
+ * CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
+ obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
+ obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
+ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
++obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
+ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+ obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
+ obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+--- a/spl/Makefile
++++ b/spl/Makefile
+@@ -207,8 +207,13 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS)
+
+ OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
+
++ifdef CONFIG_OX820
+ $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
+ $(call if_changed,objcopy)
++ $(OBJTREE)/tools/mkox820crc $@
++else
++ $(call if_changed,objcopy)
++endef
+
+ LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
+ ifneq ($(CONFIG_SPL_TEXT_BASE),)
+--- a/tools/.gitignore
++++ b/tools/.gitignore
+@@ -7,6 +7,7 @@
+ /mkenvimage
+ /mkimage
+ /mkexynosspl
++/mkox820crc
+ /mpc86x_clk
+ /mxsboot
+ /ncb
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -131,6 +131,12 @@ hostprogs-$(CONFIG_KIRKWOOD) += kwboot$(
+ hostprogs-y += proftool$(SFX)
+ hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela$(SFX)
+
++
++hostprogs-$(CONFIG_OX820) += mkox820crc$(SFX)
++
++mkox820crc$(SFX)-objs := mkox820crc.o crc32.o
++
++
+ # We build some files with extra pedantic flags to try to minimize things
+ # that won't build on some weird host compiler -- though there are lots of
+ # exceptions for files that aren't complaint.
diff --git a/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch b/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch
new file mode 100644
index 0000000..3abeb32
--- /dev/null
+++ b/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch
@@ -0,0 +1,13 @@
+diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
+index 166b901..9af3fd3 100644
+--- a/common/cmd_bootm.c
++++ b/common/cmd_bootm.c
+@@ -745,7 +745,7 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
+ return CMD_RET_USAGE;
+ }
+
+- if (state != BOOTM_STATE_START && images.state >= state) {
++ if (!(state & BOOTM_STATE_START) && images.state >= state) {
+ printf("Trying to execute a command out of order\n");
+ return CMD_RET_USAGE;
+ }
--
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list