[OpenWrt-Devel] [PATCH] [ar71xx] Added support for D-link DHP-1565 rev. A1
John Crispin
blogic at openwrt.org
Wed Nov 19 02:45:08 EST 2014
Hi,
i just merged this in my local tree. however i am now inclined to drop
it again as i now have 4 versions in my mail box none exlaining why i
have 4 and what the differences between the 4 are. also none are send
as "reply to" or marked as a resend.
John
On 19/11/2014 08:35, jaceq at aol.pl wrote:
> From: Jacek Kikiewicz <jaceq at aol.pl>
>
> Signed-off-by: Jacek Kikiewicz <jaceq at aol.pl>
>
> --- target/linux/ar71xx/base-files/etc/diag.sh | 1 +
> .../ar71xx/base-files/etc/uci-defaults/01_leds | 4 +
> .../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
> .../base-files/etc/uci-defaults/04_led_migration | 1 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-3.10 | 1 +
> .../files/arch/mips/ath79/mach-dhp-1565-a1.c | 170
> +++++++++++++++++++++
> target/linux/ar71xx/generic/profiles/d-link.mk | 11 ++
> target/linux/ar71xx/image/Makefile | 1 +
> .../730-MIPS-ath79-add-DHP-1565A1.patch | 40 +++++ 11
> files changed, 234 insertions(+) create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c create
> mode 100644
> target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh index b3a8fc5..24f5871
> 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++
> b/target/linux/ar71xx/base-files/etc/diag.sh @@ -46,6 +46,7 @@
> get_status_led() { db120) status_led="db120:green:status" ;; +
> dhp-1565-a1|\ dir-505-a1 |\ dir-600-a1 |\ dir-615-e1 |\ diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index
> 599fc19..2e41250 100755 ---
> a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -98,6
> +98,10 @@ rb-2011uias-2hnd) ucidef_set_led_switch "eth10" "ETH10"
> "rb:green:eth10" "switch1" "0x02" ;;
>
> +dhp-1565-a1) + ucidef_set_led_switch "wan" "WAN"
> "d-link:green:planet" "switch0" "0x20" + ;; + dir-505-a1)
> ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1" ;;
> diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index
> 743f9de..c7d8aec 100755 ---
> a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++
> b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@
> -258,6 +258,7 @@ mynet-n750) [ -n "$mac" ] &&
> ucidef_set_interface_macaddr "wan" "$mac" ;;
>
> +dhp-1565-a1 |\ dir-835-a1 |\ wndr3700v4 | \ wndr4300) diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
> b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
> index 0df94a0..1cef8b9 100755 ---
> a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
> +++
> b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
> @@ -46,6 +46,7 @@ migrate_leds() board=$(ar71xx_board_name)
>
> case "$board" in +dhp-1565-a1|\ dir-825-c1|\ dir-835-a1)
> migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g" diff --git
> a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh index
> 40e9303..bd7a276 100755 ---
> a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -305,6 +305,9 @@
> ar71xx_board_detect() { *"DB120 reference board") name="db120" ;; +
> *"DHP-1565 rev. A1") + name="dhp-1565-a1" + ;; *"DIR-505 rev.
> A1") name="dir-505-a1" ;; diff --git
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index
> 6220f16..3a3d4ee 100755 ---
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -167,6
> +167,7 @@ platform_check_image() { ap81 | \ ap83 | \ ap132 | \ +
> dhp-1565-a1 |\ dir-505-a1 | \ dir-600-a1 | \ dir-615-c1 | \ diff
> --git a/target/linux/ar71xx/config-3.10
> b/target/linux/ar71xx/config-3.10 index 1b3eddb..3a2b4af 100644 ---
> a/target/linux/ar71xx/config-3.10 +++
> b/target/linux/ar71xx/config-3.10 @@ -40,6 +40,7 @@
> CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_CAP4200AG=y
> CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_DB120=y
> +CONFIG_ATH79_MACH_DHP_1565_A1=y CONFIG_ATH79_MACH_DIR_505_A1=y
> CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y diff
> --git
> a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c new
> file mode 100644 index 0000000..ae47764 --- /dev/null +++
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c @@
> -0,0 +1,170 @@ +/* + * D-Link DHP-1565 rev. A1 board support + * +
> * Copyright (C) 2014 Jacek Kikiewicz + * + * This program is free
> software; you can redistribute it and/or modify it + * under the
> terms of the GNU General Public License version 2 as published + *
> by the Free Software Foundation. + */ + +#include <linux/pci.h>
> +#include <linux/phy.h> +#include <linux/gpio.h> +#include
> <linux/platform_device.h> +#include <linux/ath9k_platform.h>
> +#include <linux/ar8216_platform.h> + +#include
> <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include
> "dev-ap9x-pci.h" +#include "dev-eth.h" +#include
> "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include
> "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h"
> +#include "dev-wmac.h" +#include "machtypes.h" + +#define
> DHP1565A1_GPIO_LED_BLUE_USB 11 +#define
> DHP1565A1_GPIO_LED_AMBER_POWER 14 +#define
> DHP1565A1_GPIO_LED_BLUE_POWER 22 +#define
> DHP1565A1_GPIO_LED_BLUE_WPS 15 +#define
> DHP1565A1_GPIO_LED_AMBER_PLANET 19 +#define
> DHP1565A1_GPIO_LED_BLUE_PLANET 18 +#define
> DHP1565A1_GPIO_LED_WLAN_2G 13 + +#define
> DHP1565A1_GPIO_WAN_LED_ENABLE 20 + +#define
> DHP1565A1_GPIO_BTN_RESET 17 +#define DHP1565A1_GPIO_BTN_WPS 16
> + +#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define
> DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 *
> DHP1565A1_KEYS_POLL_INTERVAL) + +#define DHP1565A1_MAC0_OFFSET
> 0xFFA0 +#define DHP1565A1_MAC1_OFFSET 0xFFB4 +#define
> DHP1565A1_WMAC0_OFFSET 0x5 +#define DHP1565A1_WMAC_CALDATA_OFFSET
> 0x1000 +#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000 + +static
> struct gpio_led dhp1565a1_leds_gpio[] __initdata = { + { + .name
> = "d-link:amber:power", + .gpio =
> DHP1565A1_GPIO_LED_AMBER_POWER, + .active_low = 1, + }, + { +
> .name = "d-link:green:power", + .gpio =
> DHP1565A1_GPIO_LED_BLUE_POWER, + .active_low = 1, + }, + { +
> .name = "d-link:amber:planet", + .gpio =
> DHP1565A1_GPIO_LED_AMBER_PLANET, + .active_low = 1, + }, + { +
> .name = "d-link:green:planet", + .gpio =
> DHP1565A1_GPIO_LED_BLUE_PLANET, + .active_low = 1, + }, +}; +
> +static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata =
> { + { + .desc = "Soft reset", + .type = EV_KEY, + .code =
> KEY_RESTART, + .debounce_interval =
> DHP1565A1_KEYS_DEBOUNCE_INTERVAL, + .gpio =
> DHP1565A1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc =
> "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, +
> .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL, + .gpio =
> DHP1565A1_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static
> struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = { + .mode =
> AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en =
> true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, +
> .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct
> ar8327_platform_data dhp1565a1_ar8327_data = { + .pad0_cfg =
> &dhp1565a1_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, +
> .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, +
> .rxpause = 1, + }, +}; + +static struct mdio_board_info
> dhp1565a1_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", +
> .phy_addr = 0, + .platform_data = &dhp1565a1_ar8327_data, + },
> +}; + +static void __init dhp1565a1_generic_setup(void) +{ + u8
> *mac = (u8 *) KSEG1ADDR(0x1ffe0000); + u8 *art = (u8 *)
> KSEG1ADDR(0x1fff0000); + u8 mac0[ETH_ALEN], mac1[ETH_ALEN]; + u8
> wmac0[ETH_ALEN]; + + ath79_parse_ascii_mac(mac +
> DHP1565A1_MAC0_OFFSET, mac0); + ath79_parse_ascii_mac(mac +
> DHP1565A1_MAC1_OFFSET, mac1); + + ath79_register_m25p80(NULL); + +
> ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL, +
> ARRAY_SIZE(dhp1565a1_gpio_keys), + dhp1565a1_gpio_keys); + +
> ath79_init_mac(wmac0, mac0, 0); + ath79_register_wmac(art +
> DHP1565A1_WMAC_CALDATA_OFFSET, wmac0); + +
> ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + +
> mdiobus_register_board_info(dhp1565a1_mdio0_info, +
> ARRAY_SIZE(dhp1565a1_mdio0_info)); + + ath79_register_mdio(0,
> 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1); + + /*
> GMAC0 is connected to an AR8327N switch */ +
> ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; +
> ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev =
> &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 =
> 0x06000000; + ath79_register_eth(0); + + ath79_register_usb(); +}
> + +static void __init dhp1565a1_setup(void) +{ +
> ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio), +
> dhp1565a1_leds_gpio); + + dhp1565a1_generic_setup(); +} +
> +MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1", + "D-Link
> DHP-1565 rev. A1", + dhp1565a1_setup); diff --git
> a/target/linux/ar71xx/generic/profiles/d-link.mk
> b/target/linux/ar71xx/generic/profiles/d-link.mk index
> eb721c3..b6eb66c 100644 ---
> a/target/linux/ar71xx/generic/profiles/d-link.mk +++
> b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -5,6 +5,17 @@ #
> See /LICENSE for more information. #
>
> +define Profile/DHP1565A1 + NAME:=D-Link DHP-1565 rev. A1 +
> PACKAGES:=kmod-usb-core kmod-usb2 +endef + +define
> Profile/DHP1565A1/Description + Package set optimized for the
> D-Link DHP-1565 rev. A1. +endef + +$(eval $(call
> Profile,DHP1565A1)) + define Profile/DIR505A1 NAME:=D-Link DIR-505
> rev. A1 PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev diff
> --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile index 3256cb8..7d0c341 100644
> --- a/target/linux/ar71xx/image/Makefile +++
> b/target/linux/ar71xx/image/Makefile @@ -1121,6 +1121,7 @@ $(eval
> $(call
> SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B
> $(eval $(call
> SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,""
> "NA")) $(eval $(call
> SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
>
> +$(eval $(call
> SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
>
>
$(eval $(call
SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
> $(eval $(call
> SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
>
> diff --git
> a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
> b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
>
>
new file mode 100644
> index 0000000..6ca0595 --- /dev/null +++
> b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
>
>
@@ -0,0 +1,40 @@
> +--- a/arch/mips/ath79/machtypes.h ++++
> b/arch/mips/ath79/machtypes.h +@@ -39,6 +39,7 @@ +
> ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ +
> ATH79_MACH_DB120, /* Atheros DB120 reference board */ +
> ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++
> ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ +
> ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ +
> ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ +
> ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ +---
> a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -283,6
> +283,17 @@ + select ATH79_DEV_USB + select MYLOADER + ++config
> ATH79_MACH_DHP_1565_A1 ++ bool "D-Link DHP-1565 rev. A1 board
> support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI
> ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select
> ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select
> ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config
> ATH79_MACH_DIR_505_A1 + bool "D-Link DIR-505-A1 support" + select
> SOC_AR933X +--- a/arch/mips/ath79/Makefile ++++
> b/arch/mips/ath79/Makefile +@@ -54,6 +54,7 @@ +
> obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o +
> obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o +
> obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
> ++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o +
> obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o +
> obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +
> obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list