[OpenWrt-Devel] [PATCH 01/13] ar71xx: add kernel support for the OpenMesh MR900 board
Sven Eckelmann
sven at open-mesh.com
Thu Nov 13 05:42:48 EST 2014
Signed-off-by: Sven Eckelmann <sven at open-mesh.com>
---
target/linux/ar71xx/config-3.10 | 1 +
target/linux/ar71xx/config-3.14 | 1 +
.../ar71xx/files/arch/mips/ath79/mach-mr900.c | 158 +++++++++++++++++++++
.../730-MIPS-ath79-add-mr900-support.patch | 39 +++++
.../730-MIPS-ath79-add-mr900-support.patch | 39 +++++
5 files changed, 238 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
create mode 100644 target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch
create mode 100644 target/linux/ar71xx/patches-3.14/730-MIPS-ath79-add-mr900-support.patch
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index f2922c4..30ee592 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -60,6 +60,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_MR600=y
+CONFIG_ATH79_MACH_MR900=y
CONFIG_ATH79_MACH_MYNET_N600=y
CONFIG_ATH79_MACH_MYNET_N750=y
CONFIG_ATH79_MACH_MYNET_REXT=y
diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
index cc995f4..acfb3a8 100644
--- a/target/linux/ar71xx/config-3.14
+++ b/target/linux/ar71xx/config-3.14
@@ -61,6 +61,7 @@ CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_MR600=y
+CONFIG_ATH79_MACH_MR900=y
CONFIG_ATH79_MACH_MYNET_N600=y
CONFIG_ATH79_MACH_MYNET_N750=y
CONFIG_ATH79_MACH_MYNET_REXT=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
new file mode 100644
index 0000000..5bbffb1
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
@@ -0,0 +1,158 @@
+/*
+ * MR900 board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Marek Lindner <marek at open-mesh.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define MR900_GPIO_LED_LAN 12
+#define MR900_GPIO_LED_WLAN_2G 13
+#define MR900_GPIO_LED_STATUS_GREEN 19
+#define MR900_GPIO_LED_STATUS_RED 21
+#define MR900_GPIO_LED_POWER 22
+#define MR900_GPIO_LED_WLAN_5G 23
+
+#define MR900_GPIO_BTN_RESET 17
+
+#define MR900_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MR900_KEYS_DEBOUNCE_INTERVAL (3 * MR900_KEYS_POLL_INTERVAL)
+
+#define MR900_MAC0_OFFSET 0
+#define MR900_WMAC_CALDATA_OFFSET 0x1000
+#define MR900_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led mr900_leds_gpio[] __initdata = {
+ {
+ .name = "mr900:blue:power",
+ .gpio = MR900_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "mr900:blue:wan",
+ .gpio = MR900_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "mr900:blue:wlan24",
+ .gpio = MR900_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "mr900:blue:wlan58",
+ .gpio = MR900_GPIO_LED_WLAN_5G,
+ .active_low = 1,
+ },
+ {
+ .name = "mr900:green:status",
+ .gpio = MR900_GPIO_LED_STATUS_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "mr900:red:status",
+ .gpio = MR900_GPIO_LED_STATUS_RED,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button mr900_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MR900_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MR900_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+
+static void __init mr900_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+ t |= QCA955X_ETH_CFG_RGMII_EN;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init mr900_setup(void)
+{
+ u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
+ u8 mac[6], pcie_mac[6];
+ struct ath9k_platform_data *pdata;
+
+ ath79_eth0_pll_data.pll_1000 = 0xbe000101;
+ ath79_eth0_pll_data.pll_100 = 0x80000101;
+ ath79_eth0_pll_data.pll_10 = 0x80001313;
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mr900_leds_gpio),
+ mr900_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MR900_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mr900_gpio_keys),
+ mr900_gpio_keys);
+
+ ath79_init_mac(mac, art + MR900_MAC0_OFFSET, 1);
+ ath79_register_wmac(art + MR900_WMAC_CALDATA_OFFSET, mac);
+ ath79_init_mac(pcie_mac, art + MR900_MAC0_OFFSET, 16);
+ ap91_pci_init(art + MR900_PCIE_CALDATA_OFFSET, pcie_mac);
+ pdata = ap9x_pci_get_wmac_data(0);
+ if (!pdata) {
+ pr_err("mr900: unable to get address of wlan data\n");
+ return;
+ }
+ pdata->use_eeprom = true;
+
+ mr900_gmac_setup();
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + MR900_MAC0_OFFSET, 0);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(5);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_MR900, "MR900", "OpenMesh MR900", mr900_setup);
diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch
new file mode 100644
index 0000000..deb6e56
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-mr900-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_MR900
++ bool "OpenMesh MR900 board support"
++ select SOC_QCA955X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
+ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+ obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
++obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -65,6 +65,7 @@ enum ath79_mach_type {
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
++ ATH79_MACH_MR900, /* OpenMesh MR900 */
+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */
+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
diff --git a/target/linux/ar71xx/patches-3.14/730-MIPS-ath79-add-mr900-support.patch b/target/linux/ar71xx/patches-3.14/730-MIPS-ath79-add-mr900-support.patch
new file mode 100644
index 0000000..deb6e56
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/730-MIPS-ath79-add-mr900-support.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -654,6 +654,16 @@ config ATH79_MACH_CAP4200AG
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_MR900
++ bool "OpenMesh MR900 board support"
++ select SOC_QCA955X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -74,6 +74,7 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
+ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+ obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
++obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -65,6 +65,7 @@ enum ath79_mach_type {
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
++ ATH79_MACH_MR900, /* OpenMesh MR900 */
+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */
+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */
+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
--
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list