[OpenWrt-Devel] [PATCH] ar71xx: add support for the EnGenius ESR900
Forest Crossman
cyrozap at gmail.com
Sat Jun 21 01:35:55 EDT 2014
Signed-off-by: Forest Crossman <cyrozap at gmail.com>
---
package/base-files/files/lib/functions/system.sh | 1 +
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 5 +
.../ar71xx/base-files/etc/uci-defaults/02_network | 11 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
target/linux/ar71xx/config-3.10 | 1 +
.../ar71xx/files/arch/mips/ath79/mach-esr900.c | 232 +++++++++++++++++++++
target/linux/ar71xx/files/arch/mips/ath79/nvram.c | 16 ++
target/linux/ar71xx/generic/profiles/engenius.mk | 16 ++
target/linux/ar71xx/image/Makefile | 2 +
.../610-MIPS-ath79-openwrt-machines.patch | 18 +-
11 files changed, 305 insertions(+), 3 deletions(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
create mode 100644 target/linux/ar71xx/generic/profiles/engenius.mk
diff --git a/package/base-files/files/lib/functions/system.sh
b/package/base-files/files/lib/functions/system.sh
index a4c0f26..8d75a5a 100644
--- a/package/base-files/files/lib/functions/system.sh
+++ b/package/base-files/files/lib/functions/system.sh
@@ -82,6 +82,7 @@ macaddr_canonicalize()
local mac="$1"
local canon=""
+ mac=$(echo -n $mac | tr -d \")
[ ${#mac} -gt 17 ] && return
[ -n "${mac//[a-fA-F0-9\.: -]/}" ] && return
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
index d5063de..81e4eff 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -238,6 +238,9 @@ get_status_led() {
wlr8100)
status_led="sitecom:amber:status"
;;
+ esr900)
+ status_led="engenius:amber:power"
+ ;;
esac
}
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index fe5ff93..8265b00 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -103,6 +103,11 @@ dir-825-c1)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
;;
+esr900)
+ ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
+ ;;
+
hiwifi-hc6361)
ucidef_set_led_default "inet" "INET" "hiwifi:blue:internet" "0"
ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index a2b2762..08bd1c8 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -378,6 +378,17 @@ wndr3700)
uci set network. at switch_port[-1].led='2'
;;
+esr900)
+ local wan_mac
+ local lan_mac
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
+ ucidef_add_switch_vlan "switch0" "2" "0t 5"
+ wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
+ [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+ ;;
+
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 6dd5e62..e346f97 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -676,6 +676,9 @@ ar71xx_board_detect() {
*"HiWiFi HC6361")
name="hiwifi-hc6361"
;;
+ *"EnGenius ESR900")
+ name="esr900"
+ ;;
esac
case "$machine" in
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index c294cd8..78d5359 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -47,6 +47,7 @@ CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_DIR_825_C1=y
CONFIG_ATH79_MACH_DRAGINO2=y
CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_ESR900=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_GS_OOLITE=y
CONFIG_ATH79_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
new file mode 100644
index 0000000..64e590a
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
@@ -0,0 +1,232 @@
+/*
+ * EnGenius ESR900 board support
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define ESR900_GPIO_LED_POWER 2
+#define ESR900_GPIO_LED_WLAN_2G 13
+#define ESR900_GPIO_LED_WPS_BLUE 19
+#define ESR900_GPIO_LED_WPS_AMBER 22
+#define ESR900_GPIO_LED_WLAN_5G 23
+
+#define ESR900_GPIO_BTN_WPS 16
+#define ESR900_GPIO_BTN_RESET 17
+
+#define ESR900_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ESR900_KEYS_DEBOUNCE_INTERVAL (3 * ESR900_KEYS_POLL_INTERVAL)
+
+#define ESR900_CALDATA_ADDR 0x1fff0000
+#define ESR900_WMAC_CALDATA_OFFSET 0x1000
+#define ESR900_PCIE_CALDATA_OFFSET 0x5000
+
+#define ESR900_CONFIG_ADDR 0x1f030000
+#define ESR900_CONFIG_SIZE 0x10000
+
+#define ESR900_LAN_PHYMASK BIT(0)
+#define ESR900_WAN_PHYMASK BIT(5)
+#define ESR900_MDIO_MASK (~(ESR900_LAN_PHYMASK | ESR900_WAN_PHYMASK))
+
+static struct gpio_led esr900_leds_gpio[] __initdata = {
+ {
+ .name = "engenius:amber:power",
+ .gpio = ESR900_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "engenius:blue:wlan-2g",
+ .gpio = ESR900_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
+ {
+ .name = "engenius:blue:wps",
+ .gpio = ESR900_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ },
+ {
+ .name = "engenius:amber:wps",
+ .gpio = ESR900_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "engenius:blue:wlan-5g",
+ .gpio = ESR900_GPIO_LED_WLAN_5G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button esr900_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ESR900_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ESR900_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg esr900_ar8327_pad0_cfg;
+static struct ar8327_pad_cfg esr900_ar8327_pad6_cfg;
+
+static struct ar8327_platform_data esr900_ar8327_data = {
+ .pad0_cfg = &esr900_ar8327_pad0_cfg,
+ .pad6_cfg = &esr900_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info esr900_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &esr900_ar8327_data,
+ },
+};
+
+static void __init esr900_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+ t |= QCA955X_ETH_CFG_RGMII_EN;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init esr900_common_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(ESR900_CONFIG_ADDR);
+ u8 *art = (u8 *) KSEG1ADDR(ESR900_CALDATA_ADDR);
+ u8 lan_mac[6];
+ u8 wlan0_mac[6];
+ u8 wlan1_mac[6];
+
+ if (ath79_nvram_parse_mac_addr(config, ESR900_CONFIG_SIZE,
+ "ethaddr=", lan_mac) == 0) {
+ ath79_init_local_mac(ath79_eth0_data.mac_addr, lan_mac);
+ ath79_init_mac(wlan0_mac, lan_mac, 0);
+ ath79_init_mac(wlan1_mac, lan_mac, 1);
+ } else {
+ printk(KERN_ERR "mach-esr900: could not find ethaddr in u-boot
environment\n");
+ }
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(esr900_leds_gpio),
+ esr900_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, ESR900_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(esr900_gpio_keys),
+ esr900_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + ESR900_WMAC_CALDATA_OFFSET, wlan0_mac);
+
+ esr900_gmac_setup();
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(esr900_mdio0_info,
+ ARRAY_SIZE(esr900_mdio0_info));
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = ESR900_LAN_PHYMASK;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(1);
+
+ ap91_pci_init(art + ESR900_PCIE_CALDATA_OFFSET, wlan1_mac);
+}
+
+static void __init esr900_010_setup(void)
+{
+ /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
+ esr900_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
+ esr900_ar8327_pad0_cfg.txclk_delay_en = true;
+ esr900_ar8327_pad0_cfg.rxclk_delay_en = true;
+ esr900_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
+ esr900_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+
+ /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
+ esr900_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+ esr900_ar8327_pad6_cfg.rxclk_delay_en = true;
+ esr900_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
+
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ esr900_common_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_ESR900, "ESR900",
+ "EnGenius ESR900",
+ esr900_010_setup);
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
index 43911b8..9507239 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
@@ -16,6 +16,21 @@
#include "nvram.h"
+char *ath79_nvram_sanitize_mac(char *input)
+{
+ int i,j;
+ char *output=input;
+ for (i = 0, j = 0; i<strlen(input); i++,j++)
+ {
+ if (input[i]!='\"')
+ output[j]=input[i];
+ else
+ j--;
+ }
+ output[j]=0;
+ return output;
+}
+
char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
{
unsigned len = strlen(name);
@@ -59,6 +74,7 @@ int ath79_nvram_parse_mac_addr(const char *nvram,
unsigned nvram_len,
goto free;
}
+ mac_str = ath79_nvram_sanitize_mac(mac_str);
t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
diff --git a/target/linux/ar71xx/generic/profiles/engenius.mk
b/target/linux/ar71xx/generic/profiles/engenius.mk
new file mode 100644
index 0000000..343ced6
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/engenius.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2009-2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+define Profile/ESR900
+ NAME:=EnGenius ESR900
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
+endef
+
+define Profile/ESR900/Description
+ Package set optimized for the EnGenius ESR900
+endef
+
+$(eval $(call Profile,ESR900))
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index d0ee363..303a84b 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -264,6 +264,7 @@
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k at 0x7f0000(caldata_copy)
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k at 0x660000(caldata_orig),6208k at 0x50000(firmware_orig)
+esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,14656k(firmware),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k at 0x7f0000(caldata_copy)
@@ -1032,6 +1033,7 @@ $(eval $(call
SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,tt
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
diff --git a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
index 2dfecd2..12e1bbf 100644
--- a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,143 @@
+@@ -16,22 +16,144 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -35,6 +35,7 @@
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
++ ATH79_MACH_ESR900, /* EnGenius ESR900 */
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
@@ -208,7 +209,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -9,64 +64,736 @@ config ATH79_MACH_AP121
+@@ -9,64 +64,746 @@ config ATH79_MACH_AP121
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
@@ -353,6 +354,16 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_ESR900
++ bool "EnGenius ESR900 board support"
++ select SOC_QCA955X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_WZR_HP_AG300H
+ bool "Buffalo WZR-HP-AG300H board support"
+ select SOC_AR71XX
@@ -1059,7 +1070,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1085,6 +1096,7 @@
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
++obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
--
1.9.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list