[OpenWrt-Devel] [PATCH 1/1] [WEIO] Initial support for WeIO board

John Crispin john at phrozen.org
Tue Jul 1 05:07:21 EDT 2014


Hi,

comments inline

> 
> From c01a10928d2f27f89ff712896c948f549827acbe Mon Sep 17 00:00:00
> 2001 From: Drasko DRASKOVIC <drasko.draskovic at gmail.com> Date: Sun,
> 9 Feb 2014 03:46:43 +0100 Subject: [PATCH 1/2] weio: adding WeIO
> profile for OpenWrt
> 
> More changes on WeIO profile
> 
> Corrected board name detection in /tmp/sysinfo/board_name
> 
> weio: leds - enable STA and AP leds for WeIO board
> 
> mach-weio: led names to correspond to convention.
> 
> weio: buttons - added WeIO button support
> 
> button: Soft reset button moved to GPIO23
> 
> weio: i2c - add I2C functionality to WeIO kernel Signed-off-by:
> Drasko DRASKOVIC <drasko.draskovic at gmail.com> --- 
> .../ar71xx/base-files/etc/uci-defaults/01_leds     |   6 + 
> target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 + 
> .../ar71xx/base-files/lib/upgrade/platform.sh      |   3 +- 
> target/linux/ar71xx/config-3.10                    |   1 + 
> .../linux/ar71xx/files/arch/mips/ath79/mach-weio.c | 163
> +++++++++++++++++++++ target/linux/ar71xx/generic/profiles/weio.mk
> |  17 +++ target/linux/ar71xx/image/Makefile                 |   2
> + .../610-MIPS-ath79-openwrt-machines.patch          |  81
> +++++----- 8 files changed, 240 insertions(+), 36 deletions(-) 
> create mode 100644
> target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c create mode
> 100644 target/linux/ar71xx/generic/profiles/weio.mk
> 
> diff --git
> a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds 
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index
> fe5ff93..f0c2178 100755 ---
> a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++
> b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -57,6
> +57,12 @@ carambola2) ucidef_set_led_wlan "wlan" "WLAN"
> "carambola2:green:wlan" "phy0tpt" ;;
> 
> +weio) + ucidef_set_led_netdev "lan" "LAN" "weio:orange:eth0"
> "eth0" + ucidef_set_led_netdev "wan" "WAN" "weio:orange:eth1"
> "eth1" + ucidef_set_led_wlan "wlan" "WLAN" "weio:green:wlan"
> "phy0tpt" + ;; + db120) ucidef_set_led_usbdev "usb" "USB"
> "db120:green:usb" "1-1" ;; diff --git
> a/target/linux/ar71xx/base-files/lib/ar71xx.sh 
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh index
> 4656ac2..a9c0c99 100755 ---
> a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -679,6 +679,9 @@
> ar71xx_board_detect() { "8devices Carambola2"*) name="carambola2" 
> ;; + "WeIO"*) + name="weio" + ;; *"Sitecom WLR-8100") 
> name="wlr8100" ;; diff --git
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh 
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index
> 8af9580..5308cf6 100755 ---
> a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -178,7
> +178,8 @@ platform_check_image() { nbg460n_550n_550nh | \ unifi |
> \ unifi-outdoor | \ - carambola2 ) + carambola2 | \ +    weio ) [
> "$magic" != "2705" ] && { echo "Invalid image type." return 1 diff
> --git a/target/linux/ar71xx/config-3.10
> b/target/linux/ar71xx/config-3.10 index 1346c3f..36576a2 100644 ---
> a/target/linux/ar71xx/config-3.10 +++
> b/target/linux/ar71xx/config-3.10 @@ -100,6 +100,7 @@
> CONFIG_ATH79_MACH_TL_WR841N_V9=y CONFIG_ATH79_MACH_TL_WR941ND=y 
> CONFIG_ATH79_MACH_UBNT=y CONFIG_ATH79_MACH_UBNT_XM=y 
> +CONFIG_ATH79_MACH_WEIO=y CONFIG_ATH79_MACH_WHR_HP_G300N=y 
> CONFIG_ATH79_MACH_WLAE_AG300N=y CONFIG_ATH79_MACH_WLR8100=y diff
> --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c 
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c new file
> mode 100644 index 0000000..51534aa --- /dev/null +++
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c @@ -0,0
> +1,163 @@ +/** + * WEIO Web Of Things Platform + * + * Copyright
> (C) 2013 Drasko DRASKOVIC and Uros PETREVSKI + * All rights
> reserved + * + *              ##      ## ######## ####  ####### + *
> ##  ##  ## ##        ##  ##     ## + *              ##  ##  ## ##
> ##  ##     ## + *              ##  ##  ## ######    ##  ##     ## +
> *              ##  ##  ## ##        ##  ##     ## + *
> ##  ##  ## ##        ##  ##     ## + *               ###  ###
> ######## ####  ####### + * + *                   Web Of Things
> Platform + * + * This file is part of WEIO + * WEIO is free
> software: you can redistribute it and/or modify + * it under the
> terms of the GNU General Public License as published by + * the
> Free Software Foundation, either version 3 of the License, or + *
> (at your option) any later version.


linux is gpl 2 only



> + * + * WEIO is distributed in the hope that it will be useful, + *
> but WITHOUT ANY WARRANTY; without even the implied warranty of + *
> MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + *
> GNU General Public License for more details. + * + * You should
> have received a copy of the GNU General Public License + * along
> with this program.  If not, see <http://www.gnu.org/licenses/>. +
> * + * Authors : + * Drasko DRASKOVIC <drasko.draskovic at gmail.com> +
> * Uros PETREVSKI <uros at nodesign.net> + */ + +#include
> <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> 
> +#include "common.h" +#include "dev-eth.h" +#include
> "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include
> "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" 
> +#include "dev-wmac.h" +#include "machtypes.h" +#include
> "linux/i2c-gpio.h" +#include "linux/platform_device.h" + +#define
> WEIO_GPIO_LED_STA 1 +#define WEIO_GPIO_LED_AP 16 +//#define
> WEIO_GPIO_LED_ETH0 13 + +#define WEIO_GPIO_BTN_AP    20 +#define
> WEIO_GPIO_BTN_RESET 23 + +#define WEIO_KEYS_POLL_INTERVAL 20 /*
> msecs */ +#define WEIO_KEYS_DEBOUNCE_INTERVAL (3 *
> WEIO_KEYS_POLL_INTERVAL) + +#define WEIO_MAC0_OFFSET 0x0000 
> +#define WEIO_MAC1_OFFSET 0x0006 +#define WEIO_CALDATA_OFFSET
> 0x1000 +#define WEIO_WMAC_MAC_OFFSET 0x1002 + +static struct
> gpio_led weio_leds_gpio[] __initdata = { + { + .name =
> "weio:green:sta", + .gpio = WEIO_GPIO_LED_STA, + .active_low = 1, +
> .default_state = LEDS_GPIO_DEFSTATE_ON, + }, { + .name =
> "weio:green:ap", + .gpio = WEIO_GPIO_LED_AP, + .active_low = 1, +
> .default_state = LEDS_GPIO_DEFSTATE_ON, + } +}; + +static struct
> gpio_keys_button weio_gpio_keys[] __initdata = { + { + .desc = "ap
> button", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval =
> WEIO_KEYS_DEBOUNCE_INTERVAL, + .gpio = WEIO_GPIO_BTN_AP, +
> .active_low = 1, + }, + { + .desc = "soft-reset button", + .type =
> EV_KEY, + .code = BTN_1, + .debounce_interval =
> WEIO_KEYS_DEBOUNCE_INTERVAL, + .gpio = WEIO_GPIO_BTN_RESET, +
> .active_low = 1, + } +}; + +static struct i2c_gpio_platform_data
> weio_i2c_gpio_data = { + .sda_pin        = 18, + .scl_pin        =
> 19, +}; + +static struct platform_device weio_i2c_gpio = { + .name
> = "i2c-gpio", + .id             = 0, + .dev     = { +
> .platform_data  = &weio_i2c_gpio_data, + }, +}; + +static struct
> platform_device *weio_devices[] __initdata = { +
> &weio_i2c_gpio +}; + +static void __init weio_common_setup(void) 
> +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + +
> ath79_register_m25p80(NULL); + ath79_register_wmac(art +
> WEIO_CALDATA_OFFSET, +    art + WEIO_WMAC_MAC_OFFSET); + +    /**
> WeIO does not use ETH - only WiFi by default */ +#if 0


dont add dead code please

> + ath79_setup_ar933x_phy4_switch(true, true); + +
> ath79_init_mac(ath79_eth0_data.mac_addr, art + WEIO_MAC0_OFFSET,
> 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art +
> WEIO_MAC1_OFFSET, 0); + + ath79_register_mdio(0, 0x0); + + /* LAN
> ports */ + ath79_register_eth(1); + + /* WAN port */ +
> ath79_register_eth(0); +#endif /** commented out ETH */ +} + 
> +static void __init weio_setup(void) +{ + weio_common_setup(); + + 
> + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN
> | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | +
> AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | +
> AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | +
> AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + +
> platform_add_devices(weio_devices, ARRAY_SIZE(weio_devices)); + +
> ath79_register_leds_gpio(-1, ARRAY_SIZE(weio_leds_gpio), +
> weio_leds_gpio); + + ath79_register_gpio_keys_polled(-1,
> WEIO_KEYS_POLL_INTERVAL, + ARRAY_SIZE(weio_gpio_keys), +
> weio_gpio_keys); + ath79_register_usb(); +} + 
> +MIPS_MACHINE(ATH79_MACH_WEIO, "WEIO", "WeIO board from Drasko 
> DRASKOVIC and Uros PETREVSKI", + weio_setup); diff --git
> a/target/linux/ar71xx/generic/profiles/weio.mk 
> b/target/linux/ar71xx/generic/profiles/weio.mk


patch is line broken here

> new file mode 100644 index 0000000..227cec9 --- /dev/null +++
> b/target/linux/ar71xx/generic/profiles/weio.mk @@ -0,0 +1,17 @@ +# 
> +# Copyright (C) 2013 OpenWrt.org +# +# This is free software,
> licensed under the GNU General Public License v2. +# See /LICENSE
> for more information. +# + +define Profile/WEIO +
> NAME:=WeIO +        PACKAGES:=kmod-usb-core kmod-usb2 +endef + 
> +define Profile/WEIO/Description +        Package set optimized for
> the WeIO board. +endef + +$(eval $(call Profile,WEIO)) diff --git
> a/target/linux/ar71xx/image/Makefile 
> b/target/linux/ar71xx/image/Makefile index 6bc1105..dc61472 100644 
> --- a/target/linux/ar71xx/image/Makefile +++
> b/target/linux/ar71xx/image/Makefile @@ -249,6 +249,7 @@ 
> ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRA
>
> 
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k at 0x10000(firmware)
> ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k at 0x50000(firmware)
>
> 
carambola2_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
> +weio_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
>
> 
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k at 0x50000(firmware)
> ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
>
> 
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k at 0x50000(firmware)
> @@ -1019,6 +1020,7 @@ $(eval $(call 
> SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_ 
> $(eval $(call
> SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage))
>
> 
$(eval $(call
SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
> $(eval $(call
> SingleProfile,AthLzma,64k,CARAMBOLA2,carambola2,CARAMBOLA2,ttyATH0,115200,$$(carambola2_mtdlayout_16M),KRuImage,65536))
>
> 
+$(eval $(call
SingleProfile,AthLzma,64k,WEIO,weio,WEIO,ttyATH0,115200,$$(weio_mtdlayout_16M),KRuImage,65536))
> $(eval $(call
> SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
>
> 
$(eval $(call
SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
> $(eval $(call
> SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
>
> 
diff --git
a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
> b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
>
> 
index 2dfecd2..c2c7472 100644
> ---
> a/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch
>
> 
+++ b/target/linux/ar71xx/patches-3.10/610-MIPS-ath79-openwrt-machines.patch


this file is patched with a pile of unrelated things and i fail to see
in the jungle what actually gets changed. you certainly are patching
boards that are not weio

> @@ -24,6 +24,7 @@ + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2
> A1 */ + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ +
> ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ ++
> ATH79_MACH_WEIO, /* WeIO board */ ATH79_MACH_DB120, /* Atheros
> DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference
> board */ + ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ @@
> -208,13 +209,13 @@ config ATH79_MACH_AP121 bool "Atheros AP121
> reference board" select SOC_AR933X -@@ -9,64 +64,736 @@ config
> ATH79_MACH_AP121 - select ATH79_DEV_GPIO_BUTTONS - select
> ATH79_DEV_LEDS_GPIO +@@ -11,62 +66,734 @@ config ATH79_MACH_AP121 
> select ATH79_DEV_M25P80 -- select ATH79_DEV_USB -+ select
> ATH79_DEV_USB -+ select ATH79_DEV_WMAC + select ATH79_DEV_USB +
> select ATH79_DEV_WMAC +- help +-  Say 'Y' here if you want your
> kernel to support the +-  Atheros AP121 reference board. + help +
> Say 'Y' here if you want your kernel to support the +  Atheros
> AP121 reference board. @@ -677,13 +678,8 @@ + select
> ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select
> ATH79_DEV_M25P80 - select ATH79_DEV_WMAC -- help --  Say 'Y' here
> if you want your kernel to support the --  Atheros AP121 reference
> board. - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135
> reference board" ++ select ATH79_DEV_WMAC ++ +config
> ATH79_MACH_EAP7660D + bool "Senao EAP7660D support" + select
> SOC_AR71XX @@ -694,20 +690,14 @@ + +config ATH79_MACH_ARCHER_C7 +
> bool "TP-LINK Archer C7 board support" - select SOC_QCA955X ++
> select SOC_QCA955X + select ATH79_DEV_ETH - select
> ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select
> ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB -
> select ATH79_DEV_WMAC -- help --  Say 'Y' here if you want your
> kernel to support the --  Atheros AP136 or AP135 reference boards. 
> - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" 
> ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++
> select ATH79_DEV_SPI ++ select ATH79_DEV_USB ++ select
> ATH79_DEV_WMAC ++ +config ATH79_MACH_TL_MR11U + bool "TP-LINK
> TL-MR11U/TL-MR3040 support" + select SOC_AR933X @@ -717,17 +707,27
> @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select
> ATH79_DEV_WMAC -+ + +-config ATH79_MACH_AP136 +- bool "Atheros
> AP136/AP135 reference board" +- select SOC_QCA955X +config
> ATH79_MACH_TL_MR13U + bool "TP-LINK TL-MR13U support" + select
> SOC_AR933X + select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS 
> -+ select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_GPIO_BUTTONS +
> select ATH79_DEV_LEDS_GPIO +- select ATH79_DEV_NFC +- select
> ATH79_DEV_SPI + select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+
> select ATH79_DEV_WMAC -+ + select ATH79_DEV_USB + select
> ATH79_DEV_WMAC +- help +-  Say 'Y' here if you want your kernel to
> support the +-  Atheros AP136 or AP135 reference boards. + +-config
> ATH79_MACH_AP81 +- bool "Atheros AP81 reference board" +config
> ATH79_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select
> SOC_AR933X @@ -971,7 +971,7 @@
> 
> config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" 
> -@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +810,75 @@
> config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to
> support the Ubiquiti Networks XM (rev 1.0) board.
> 
> @@ -1024,6 +1024,16 @@ + select ATH79_DEV_USB + select
> ATH79_DEV_WMAC + ++config ATH79_MACH_WEIO ++ bool "WeIO board by
> Drasko DRASKOVIC and Uros PETREVSKI" ++ select SOC_AR933X ++ select
> ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select
> ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select
> ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ +config
> ATH79_MACH_BHU_BXU2000N2_A + bool "BHU BXU2000n-2 rev. A support" +
> select SOC_AR934X @@ -1037,7 +1047,7 @@ endmenu
> 
> config SOC_AR71XX -@@ -132,7 +918,10 @@ config ATH79_DEV_DSA +@@
> -132,7 +928,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH 
> def_bool n
> 
> @@ -1049,7 +1059,7 @@ def_bool n
> 
> config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +953,7 @@ config
> ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +963,7 @@ config
> ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n
> 
> @@ -1150,6 +1160,7 @@ +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) +=
> mach-wzr-hp-g450h.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) +=
> mach-zcn-1523h.o +obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) +=
> mach-carambola2.o ++obj-$(CONFIG_ATH79_MACH_WEIO)      +=
> mach-weio.o --- a/arch/mips/ath79/prom.c +++
> b/arch/mips/ath79/prom.c @@ -180,6 +180,12 @@ void __init
> prom_init(void)
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list