[OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus
David Hutchison
dhutchison at bluemesh.net
Mon Dec 29 23:42:08 EST 2014
Does the new kernel / ath9k address the RF Filter on this board? I
came up with an old patch for this board, but whenever I changed the
channel inside OpenWRT the signal would just disappear. The RF Filter
has to be toggled somehow ( I assume it's a GPIO of some sort ). I am
just curious on how it was fixed, or if it's still an issue.
-- Davey
On Mon, Dec 29, 2014 at 8:01 PM, Matthias Schiffer
<mschiffer at universe-factory.net> wrote:
> Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 3 ++
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 ++
> .../ar71xx/base-files/lib/upgrade/platform.sh | 2 +
> target/linux/ar71xx/image/Makefile | 3 +-
> .../610-MIPS-ath79-openwrt-machines.patch | 3 +-
> .../patches-3.14/616-MIPS-ath79-ubnt-xw.patch | 61 +++++++++++++++++++++-
> 6 files changed, 72 insertions(+), 3 deletions(-)
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
> index 06b96a3..30e4aeb 100755
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -254,6 +254,9 @@ get_status_led() {
> uap-pro)
> status_led="ubnt:white:dome"
> ;;
> + unifi-outdoor-plus)
> + status_led="ubnt:white:front"
> + ;;
> airgateway)
> status_led="ubnt:white:status"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 9b056e9..a12101a 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -732,6 +732,9 @@ ar71xx_board_detect() {
> *"UniFiAP Outdoor")
> name="unifi-outdoor"
> ;;
> + *"UniFiAP Outdoor+")
> + name="unifi-outdoor-plus"
> + ;;
> *WP543)
> name="wp543"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 6dabf4e..2752729 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -368,6 +368,7 @@ platform_check_image() {
> return 1
> ;;
>
> + unifi-outdoor-plus | \
> uap-pro)
> [ "$magic_long" != "19852003" ] && {
> echo "Invalid image type."
> @@ -483,6 +484,7 @@ platform_do_upgrade() {
> om5p)
> platform_do_upgrade_openmesh "$ARGV"
> ;;
> + unifi-outdoor-plus | \
> uap-pro)
> MTD_CONFIG_ARGS="-s 0x180000"
> default_do_upgrade "$ARGV"
> diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
> index 18c9637..3eb2f07 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -1333,6 +1333,7 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,tty
> $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
>
> $(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
> +$(eval $(call SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-UOP,ttyS0,115200,BZ,BZ,ar7240))
>
> $(eval $(call SingleProfile,UBDEV,64kraw,UBDEV01,ubdev01,UBNT-UF,ttyS0,115200,XM,XM,ar7240))
>
> @@ -1396,7 +1397,7 @@ $(eval $(call MultiProfile,TLWR941,TLWR941NV2 TLWR941NV3 TLWR941NV4 TLWR941NV6))
> $(eval $(call MultiProfile,TLWR1043,TLWR1043V1 TLWR1043V2))
> $(eval $(call MultiProfile,TLWDR4300,TLWDR3500V1 TLWDR3600V1 TLWDR4300V1 TLWDR4300V1IL TLWDR4310V1 MW4530RV1))
> $(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
> -$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UAPPRO UBNTAIRGW))
> +$(eval $(call MultiProfile,UBNT,UBNTAIRROUTER UBNTRS UBNTRSPRO UBNTLSSR71 UBNTBULLETM UBNTROCKETM UBNTNANOM UBNTNANOMXW UBNTLOCOXW UBNTUNIFI UBNTUNIFIOUTDOOR UBNTUNIFIOUTDOORPLUS UAPPRO UBNTAIRGW))
> $(eval $(call MultiProfile,WNDR3700,WNDR3700V1 WNDR3700V2 WNDR3800 WNDR3800CH WNDRMAC WNDRMACV2))
> $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
> $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
> diff --git a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
> index 4ce9268..b01c5de 100644
> --- a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
> +++ b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch
> @@ -1,6 +1,6 @@
> --- a/arch/mips/ath79/machtypes.h
> +++ b/arch/mips/ath79/machtypes.h
> -@@ -16,22 +16,145 @@
> +@@ -16,22 +16,146 @@
>
> enum ath79_mach_type {
> ATH79_MACH_GENERIC = 0,
> @@ -119,6 +119,7 @@
> ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
> ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
> ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
> ++ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
> ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
> + ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
> + ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
> diff --git a/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
> index 3675518..8e16697 100644
> --- a/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
> +++ b/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
> @@ -1,6 +1,65 @@
> --- a/arch/mips/ath79/mach-ubnt-xm.c
> +++ b/arch/mips/ath79/mach-ubnt-xm.c
> -@@ -332,3 +332,78 @@ static void __init ubnt_uap_pro_setup(vo
> +@@ -186,6 +186,19 @@ static struct gpio_led ubnt_unifi_outdoo
> + }
> + };
> +
> ++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
> ++ {
> ++ .name = "ubnt:white:front",
> ++ .gpio = 1,
> ++ .active_low = 0,
> ++ }, {
> ++ .name = "ubnt:blue:front",
> ++ .gpio = 0,
> ++ .active_low = 0,
> ++ }
> ++};
> ++
> ++
> + static void __init ubnt_unifi_setup(void)
> + {
> + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
> +@@ -245,6 +258,38 @@ MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDO
> + "Ubiquiti UniFiAP Outdoor",
> + ubnt_unifi_outdoor_setup);
> +
> ++
> ++static void __init ubnt_unifi_outdoor_plus_setup(void)
> ++{
> ++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
> ++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
> ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
> ++
> ++ ath79_register_m25p80(NULL);
> ++
> ++ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
> ++ UBNT_UNIFIOD_2ND_PHYMASK));
> ++
> ++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
> ++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
> ++ ath79_register_eth(0);
> ++ ath79_register_eth(1);
> ++
> ++ ap91_pci_init(ee, NULL);
> ++
> ++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
> ++ ubnt_unifi_outdoor_plus_leds_gpio);
> ++
> ++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
> ++ ARRAY_SIZE(ubnt_xm_gpio_keys),
> ++ ubnt_xm_gpio_keys);
> ++}
> ++
> ++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
> ++ "Ubiquiti UniFiAP Outdoor+",
> ++ ubnt_unifi_outdoor_plus_setup);
> ++
> ++
> + static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
> + {
> + .name = "ubnt:white:dome",
> +@@ -332,3 +377,78 @@ static void __init ubnt_uap_pro_setup(vo
> MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
> ubnt_uap_pro_setup);
>
> --
> 2.2.1
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list