[OpenWrt-Devel] [PATCH] BB: ralink/mt7530: fixbug: unused vlan entry will take effect to other vlan.

xfguo at credosemi.com xfguo at credosemi.com
Thu Dec 18 03:42:03 EST 2014


It will fail when you have an uci network config like this:

```
config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '15'
	option vid '1'
	option ports '0 6t'

config switch_port
	option name 'switch0'
	option port '0'
	option pvid '1'
```

It will be good until you run:

	$ swconfig dev switch0 vlan 1 set vid 333

So it seems that when REG_ESW_VLAN_VAWD1_VALID is unset, it will still take
effect for VTU matching when two VTU entries have a same VID.

Signed-off-by: Xiongfei Guo <xfguo at credosemi.com>
---
 .../files/drivers/net/ethernet/ralink/mt7530.c     | 26 ++++++++++++++--------
 1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c
index 1352b25..27fc51a 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mt7530.c
@@ -408,6 +408,22 @@ mt7530_apply_config(struct switch_dev *dev)
 		u8 etags = priv->vlan_entries[i].etags;
 		u32 val;
 
+
+		/* vlan port membership */
+		if (member)
+			mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
+				REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
+				REG_ESW_VLAN_VAWD1_VALID);
+		else {
+			mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
+
+			/* ignore vid (just set it to 0) when the ports is empty,
+			 * because even the REG_ESW_VLAN_VAWD1_VALID is set to disable,
+			 * it will still take effect to other vlan when they have
+			 * a same vid. */
+			vid = 0;
+		}
+
 		/* vid of vlan */
 		val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i));
 		if (i % 2 == 0) {
@@ -417,16 +433,8 @@ mt7530_apply_config(struct switch_dev *dev)
 			val &= 0xfff;
 			val |= (vid << 12);
 		}
-		mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
-
-		/* vlan port membership */
-		if (member)
-			mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC |
-				REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) |
-				REG_ESW_VLAN_VAWD1_VALID);
-		else
-			mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0);
 
+		mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val);
 		/* egress mode */
 		val = 0;
 		for (j = 0; j < MT7530_NUM_PORTS; j++) {
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list