[OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix

[Chris Green]

On Sat, Dec 13, 2014 at 04:42:03PM -0700, Davey Hutchison wrote:
> The boot loader on these boards is routerboot. I do not know if routerboot 
> provides a md like command or not. 
> 
Here's the RouterBOOT menu on my RB2011:-


RouterBOOT booter 3.18

RouterBoard 2011UiAS-2HnD

CPU frequency: 600 MHz
 Memory speed: 200 MHz
  Memory size: 128 MiB
    NAND size: 128 MiB

Press any key within 9 seconds to enter setup

RouterBOOT-3.18
What do you want to configure?
   d - boot delay
   k - boot key
   s - serial console
   n - silent boot
   o - boot device
   f - cpu frequency
   r - reset booter configuration
   e - format nand
   w - repartition nand
   g - upgrade firmware
   i - board info
   p - boot protocol
   b - booter options
   t - do memory testing
   x - exit setup
your choice: 

-- 
Chris Green
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel