[OpenWrt-Devel] [PATCH] ar71xx: add an extra check on board_name for ath10k firmware patchs

[Alexander Couzens]

It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
---
 .../ar71xx/base-files/lib/preinit/82_patch_ath10k    | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
index c5c60ef..0455ecb 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
+++ b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
@@ -3,13 +3,13 @@
 . /lib/functions/system.sh
 . /lib/ar71xx.sh
 
-firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin"
-firmware_md5_orig="5163aa8de591f80b06c77f22e9777473"
-firmware_md5_current="$(md5sum $firmware_file)"
-firmware_md5_current="${firmware_md5_current%% *}"
-
 
 do_patch_ath10k_firmware() {
+	local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin"
+	local firmware_md5_orig="5163aa8de591f80b06c77f22e9777473"
+	local firmware_md5_current="$(md5sum $firmware_file)"
+	local firmware_md5_current="${firmware_md5_current%% *}"
+
 	# verify md5sum before patching
 	[ "firmware_md5_orig" != "firmware_md5_current" ] || {
 		return
@@ -34,4 +34,12 @@ do_patch_ath10k_firmware() {
 	rm /tmp/ath10k-firmware.bin
 }
 
-boot_hook_add preinit_main do_patch_ath10k_firmware
+check_patch_ath10k_firmware() {
+	case $(ar71xx_board_name) in
+		dgl-5500-a1)
+			do_patch_ath10k_firmware
+		;;
+	esac
+}
+
+boot_hook_add preinit_main check_patch_ath10k_firmware
-- 
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel