[OpenWrt-Devel] [PATCH] kirkwood: enable EA4500 switch on 3.18

[Claudio Leite]

Signed-off-by: Claudio Leite <leitec at staticky.com>
---
 target/linux/kirkwood/patches-3.18/160-ea4500.patch | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/target/linux/kirkwood/patches-3.18/160-ea4500.patch b/target/linux/kirkwood/patches-3.18/160-ea4500.patch
index bf33756..7456b13 100644
--- a/target/linux/kirkwood/patches-3.18/160-ea4500.patch
+++ b/target/linux/kirkwood/patches-3.18/160-ea4500.patch
@@ -10,7 +10,7 @@
  	kirkwood-ib62x0.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-ea4500.dts
-@@ -0,0 +1,156 @@
+@@ -0,0 +1,167 @@
 +/*
 + * kirkwood-ea4500.dts - Device Tree file for Linksys EA4500
 + *
@@ -120,6 +120,17 @@
 +			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
++
++	mvsw6171 {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
++
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
++	};
 +};
 +
 +&nand {
-- 
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel