[OpenWrt-Devel] [PATCH RESEND 1/2] kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file

[Luka Perkov]

Hi Richard,

On Mon, Dec 08, 2014 at 10:41:28PM +0100, Richard Kunze wrote:
> Signed-off-by: Richard Kunze <richard.kunze at web.de>
> ---
>  .../linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch  | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch

Did you send this to linux kernel arm mailing list? If not please do
that and ping me after. Thanks.

Luka

> diff --git a/target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch b/target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch
> new file mode 100644
> index 0000000..62f244c
> --- /dev/null
> +++ b/target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch
> @@ -0,0 +1,13 @@
> +--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
> ++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
> +@@ -168,6 +168,10 @@
> + 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> + 		};
> + 	};
> ++	gpio-poweroff {
> ++		compatible = "gpio-poweroff";
> ++		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
> ++	};
> + };
> + 
> + &nand {
> -- 
> 1.9.1
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel