[OpenWrt-Devel] ar934x+ar8327v4

[Chris Green]

On Mon, Dec 08, 2014 at 11:13:07AM -0700, David Hutchison wrote:
> 
> root at OpenWrt:/dev# ifconfig eth0
> eth0      Link encap:Ethernet  HWaddr 4C:5E:0C:6D:24:43
>           inet addr:10.128.41.249  Bcast:10.128.41.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:144 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:8996 (8.7 KiB)  TX bytes:1292 (1.2 KiB)
>           Interrupt:4
> 
If it's of any use/interest my rb-2011uias-2hnd gives the following
MAC addresses:-

    br-lan    Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:3E  
    eth0      Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:3E  
    eth0.1    Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:3E  
    eth0.2    Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:3E  
    eth0.3    Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:3E  
    eth1      Link encap:Ethernet  HWaddr 4C:5E:0C:73:87:43  

Oddly it's eth1, the 10/100 fast ethernet switch built into the
processor that works and eth0 the Gigabit switch that doesn't work. 

Running an ARP scan from another computer on the LAN shows the
mikrotik (192.168.1.40) as follows:-

    192.168.1.40     mikrotik                    4C:5E:0C:73:87:3E (Unknown)  


-- 
Chris Green
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel