[OpenWrt-Devel] [PATCH 1/1] [kernel] ar71xx: reset problem fix

Michael Uray Michael.Uray at ctb.co.at
Fri Dec 5 04:00:05 EST 2014


Hello guys,

I got no response here in this mailing list to my last e-mail regarding to the reset patch.
The problem is still active and it also concerns the trunk version.
Please also see the corresponding ticket: https://dev.openwrt.org/ticket/17839

The patch which I used for BB is also available by the following download link, if you prefer this way:
http://www.ctb.co.at/download/OpenWRT/14.07-rf/ar71xx/generic/903-MIPS-ath79-fix-restart.patch

Is there a special reason why this patch gets not accepted?

Michael

---
This patch fixes the reset bug on the ar71xx platform.

The reboot command causes sometimes hanging routers with TL-WDR3600 (HW V1.5) and TL-WDR4300 (HW V1.7) platforms and probably also on other devices.

Sometimes a reboot is successful, sometimes not and a power cycle of the device is required.
This patch runs an endless loop when the mask for the FULL_CHIP_RESET gets set, the write to the reset register is done and waits then until the CPU reboots.

There is also a ticket #17839 to this bug.
https://dev.openwrt.org/ticket/17839

Signed-off-by: Michael Uray <michael.uray at ctb.co.at>

---
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -83,6 +83,8 @@ void ath79_device_reset_set(u32 mask)
        spin_lock_irqsave(&ath79_device_reset_lock, flags);
        t = ath79_reset_rr(reg);
        ath79_reset_wr(reg, t | mask);
+       if (mask == AR71XX_RESET_FULL_CHIP)
+                for (;;);
        spin_unlock_irqrestore(&ath79_device_reset_lock, flags);  }  EXPORT_SYMBOL_GPL(ath79_device_reset_set);


-----Ursprüngliche Nachricht-----
Von: Michael Uray 
Gesendet: Dienstag, 21. Oktober 2014 14:31
An: openwrt-devel at lists.openwrt.org
Betreff: AW: [OpenWrt-Devel] [PATCH 1/1] [kernel] ar71xx: reset problem fix

John,

I have tried to use your recommended macro but it did not work.
Please see comment #70 for details: https://dev.openwrt.org/ticket/17839#comment:70

The patch should be then fine so far as I can see, I just corrected the comments.

Michael

---
This patch fixes the reset bug on the ar71xx platform.

The reboot command causes sometimes hanging routers with TL-WDR3600 (HW V1.5) and TL-WDR4300 (HW V1.7) platforms and probably also on other devices.

Sometimes a reboot is successful, sometimes not and a power cycle of the device is required.
This patch runs an endless loop when the mask for the FULL_CHIP_RESET gets set, the write to the reset register is done and waits then until the CPU reboots.

There is also a ticket #17839 to this bug.
https://dev.openwrt.org/ticket/17839

Signed-off-by: Michael Uray <michael.uray at ctb.co.at>

---
--- a/arch/mips/ath79/common.c
+++ b/arch/mips/ath79/common.c
@@ -83,6 +83,8 @@ void ath79_device_reset_set(u32 mask)
        spin_lock_irqsave(&ath79_device_reset_lock, flags);
        t = ath79_reset_rr(reg);
        ath79_reset_wr(reg, t | mask);
+       if (mask == AR71XX_RESET_FULL_CHIP)
+                for (;;);
        spin_unlock_irqrestore(&ath79_device_reset_lock, flags);  }  EXPORT_SYMBOL_GPL(ath79_device_reset_set);



-----Ursprüngliche Nachricht-----
Von: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] Im Auftrag von John Crispin
Gesendet: Samstag, 18. Oktober 2014 07:37
An: openwrt-devel at lists.openwrt.org
Betreff: Re: [OpenWrt-Devel] [PATCH 1/1] [kernel] ar71xx: reset problem fix


On 18/10/2014 00:10, Michael Uray wrote:
> This patch fixes the reset bug on the ar71xx platform.
>
> The reboot command causes sometimes hanging routers with TL-WDR3600 (HW V1.5) and TL-WDR4300 (HW V1.7) platforms and probably also on other devices.
>
> Sometimes a reboot is successful, sometimes not and a power cycle of the device is required.
> This patch runs an endless loop after the interrupts get disabled and the FULL_CHIP_RESET gets set and waits then until the CPU reboots.
Hi,

the code does not set the FULL_CHIP_RESET but checks whether it is set.
also please look at the unreachable() macro instead of using a endless loop

    John



>
> There is also a ticket #17839 to this bug.
> https://dev.openwrt.org/ticket/17839
>
> Signed-off-by: Michael Uray <michael.uray at ctb.co.at>
>
> I am not subscribed to the mailing list, so please put me on CC if you answer.
>
> ---
> --- a/arch/mips/ath79/common.c
> +++ b/arch/mips/ath79/common.c
> @@ -83,6 +83,8 @@ void ath79_device_reset_set(u32 mask)
>         spin_lock_irqsave(&ath79_device_reset_lock, flags);
>         t = ath79_reset_rr(reg);
>         ath79_reset_wr(reg, t | mask);
> +       if (mask == AR71XX_RESET_FULL_CHIP)
> +                for (;;);
>         spin_unlock_irqrestore(&ath79_device_reset_lock, flags);  } 
> EXPORT_SYMBOL_GPL(ath79_device_reset_set);
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list