[OpenWrt-Devel] [PATCH 2/3] uboot-oxnas: adjust digtial drive strength of IC+ phy
Daniel Golle
daniel at makrotopia.org
Wed Dec 3 10:04:16 EST 2014
This is what the vendor bootloader does on KD20.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
package/boot/uboot-oxnas/patches/200-icplus-phy.patch | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch b/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
index 3db7816..b378331 100644
--- a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
+++ b/package/boot/uboot-oxnas/patches/200-icplus-phy.patch
@@ -24,7 +24,7 @@ Add it back, so we can use it.
obj-$(CONFIG_PHY_MICREL) += micrel.o
--- /dev/null
+++ b/drivers/net/phy/icplus.c
-@@ -0,0 +1,80 @@
+@@ -0,0 +1,93 @@
+/*
+ * ICPlus PHY drivers
+ *
@@ -43,6 +43,15 @@ Add it back, so we can use it.
+#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
++#define IP1001LF_DRIVE_MASK (15 << 5)
++#define IP1001LF_RXCLKDRIVE_HI (2 << 5)
++#define IP1001LF_RXDDRIVE_HI (2 << 7)
++#define IP1001LF_RXCLKDRIVE_M (1 << 5)
++#define IP1001LF_RXDDRIVE_M (1 << 7)
++#define IP1001LF_RXCLKDRIVE_L (0 << 5)
++#define IP1001LF_RXDDRIVE_L (0 << 7)
++#define IP1001LF_RXCLKDRIVE_VL (3 << 5)
++#define IP1001LF_RXDDRIVE_VL (3 << 7)
+
+static int ip1001_config(struct phy_device *phydev)
+{
@@ -73,6 +82,10 @@ Add it back, so we can use it.
+ return c;
+
+ c |= IP1001_PHASE_SEL_MASK;
++ /* adjust digtial drive strength */
++ c &= ~IP1001LF_DRIVE_MASK;
++ c |= IP1001LF_RXCLKDRIVE_M;
++ c |= IP1001LF_RXDDRIVE_M;
+ c = phy_write(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS,
+ c);
+ if (c < 0)
--
2.1.3
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list