[OpenWrt-Devel] [PATCH 1/4] lantiq: improve ARV7519RW22 support

[Álvaro Fernández Rojas]

- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 22dea2a..2dee0c1 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -156,7 +156,7 @@ TDW8970)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	;;
 
-ARV7519*)
+ARV7519RW22)
 	lan_mac=$(mtd_get_mac_binary boardconfig 22)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	;;
diff --git a/target/linux/lantiq/dts/ARV7519RW.dtsi b/target/linux/lantiq/dts/ARV7519RW.dtsi
index eff337e..d2d083f 100644
--- a/target/linux/lantiq/dts/ARV7519RW.dtsi
+++ b/target/linux/lantiq/dts/ARV7519RW.dtsi
@@ -1,7 +1,7 @@
 /include/ "vr9.dtsi"
 
 / {
-	model = "ARV7519 - Astoria Networks ARV7519RW22-A-LT";
+	model = "ARV7519RW22 - Astoria Networks ARV7519RW22-A-LT";
 
 	chosen {
 		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
@@ -27,17 +27,22 @@
 				};
 
 				partition at 60000 {
-					label = "uboot_cfg";
+					label = "uboot-env";
 					reg = <0x60000 0x20000>;
 					read-only;
 				};
 
 				partition at 80000 {
 					label = "firmware";
-					reg = <0x80000 0x1f00000>;
+					reg = <0x80000 0x1e00000>;
 				};
 
-				partition at 1f80000 {
+				partition at 1e80000 {
+					label = "dsl_fw";
+					reg = <0x1e80000 0x100000>;
+				};
+
+				boardconfig: partition at 1f80000 {
 					label = "boardconfig";
 					reg = <0x1f80000 0x80000>;
 					read-only;
@@ -54,19 +59,6 @@
 					lantiq,groups = "mdio";
 					lantiq,function = "mdio";
 				};
-				gphy-leds {
-					lantiq,groups = "gphy0 led1", "gphy1 led1";
-					lantiq,function = "gphy";
-					lantiq,pull = <2>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
-				phy-rst {
-					lantiq,pins = "io42";
-					lantiq,pull = <0>;
-					lantiq,open-drain = <0>;
-					lantiq,output = <1>;
-				};
 				pcie-rst {
 					lantiq,pins = "io21";
 					lantiq,pull = <0>;
@@ -92,8 +84,15 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0>;
-				mac-address = [ 00 11 22 33 44 55 ];
+				mtd-mac-address = <&boardconfig 0x16>;
+				lantiq,switch;
 
+				ethernet at 0 {
+					compatible = "lantiq,xrx200-pdi-port";
+					reg = <0>;
+					phy-mode = "rgmii";
+					phy-handle = <&phy0>;
+				};
 				ethernet at 1 {
 					compatible = "lantiq,xrx200-pdi-port";
 					reg = <4>;
@@ -120,21 +119,6 @@
 				};
 			};
 
-			wan: interface at 1 {
-				compatible = "lantiq,xrx200-pdi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>;
-				mac-address = [ 00 11 22 33 44 56 ];
-				lantiq,wan;
-				ethernet at 0 {
-					compatible = "lantiq,xrx200-pdi-port";
-					reg = <0>;
-					phy-mode = "rgmii";
-					phy-handle = <&phy0>;
-				};
-			};
-
 			mdio at 0 {
 				#address-cells = <1>;
 				#size-cells = <0>;
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel