[OpenWrt-Devel] [PATCH] ramips: enable additional GPIOs on HAME MPR-A1

[Paul Fertser]

On Fri, Aug 08, 2014 at 06:32:15PM +0200, Álvaro Fernández Rojas wrote:
> If you also add "spi_cs1" GPIO#27 will be exposed.
> This was added on https://dev.openwrt.org/changeset/41938 for VoCore.

Yes, but it's not routed from under the SoC, unfortunately, so there's
no reason to do it.

-- 
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel