[OpenWrt-Devel] [PATCH] ar71xx: add support for TP-Link TL-MR3020 (V2.1)

Hartmut Knaack knaack.h at gmx.de
Mon Jan 2 23:28:09 CET 2012


Christian Cier-Zniewski schrieb:
> Sorry, patch v2 did not compile due to a typo.
>
> V2.1 compiles successfully.
>
> ---
> This patch adds support for the TP-Link device TL-MR3020 which is very 
> similiar to the TL-WR703N.
> The correct LED and button GPIO assignments have been added in this 
> second version of the patch.
> The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
> Only four LEDs can be controlled via GPIO. The power LED is connected to 
> the power supply.
> The WPS push button has been mapped to KEY_WPS_BUTTON.
> The two GPIO signals of the sliding switch have been mapped to BTN_0 and 
> BTN_1.
>
> I have also setup a wiki page with details here:
> http://wiki.openwrt.org/toh/tp-link/tl-mr3020
>
> USB is working and has been tested with USB mass storage and USB UMTS stick.
>
> Wifi also seems to work.
>
> Ethernet is working too.
>
> Signed-off-by: Christian Cier-Zniewski <c.cier at gmx.de>
>
>
Hi,
even though you claim it to be very similar to the wr703, I would recommend to keep alphabetic sort order (meaning to put it next to the mr models instead of the wr models).


More information about the openwrt-devel mailing list