[FS#4004] mt7915e, 5GHz radio in Belkin RT3200 not showing up in r17470-43f0e386d4

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sat Sep 4 15:55:31 PDT 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Tim (Cmd-Q) 

Attached to Project - OpenWrt/LEDE Project
Summary - mt7915e, 5GHz radio in Belkin RT3200 not showing up in r17470-43f0e386d4
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on Belkin RT3200/AX3200, Linksys E8450
 - Software versions: OpenWrt SNAPSHOT, r17470-43f0e386d4
 - Update to or flash snapshot

The second radio does not show up. I can see references to the device in the kernel log:
Fri Sep  3 07:53:39 2021 kern.debug kernel: [    8.157849] mt7915e 0000:01:00.0: assign IRQ: got 143
Fri Sep  3 07:53:39 2021 kern.info kernel: [    8.167980] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
Fri Sep  3 07:53:39 2021 kern.debug kernel: [    8.174080] mt7915e 0000:01:00.0: enabling bus mastering
Fri Sep  3 07:53:39 2021 kern.info kernel: [    8.254567] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20201105222230a
Fri Sep  3 07:53:39 2021 kern.info kernel: [    8.378506] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20201105222304
Fri Sep  3 07:53:39 2021 kern.info kernel: [    8.460898] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323
Fri Sep  3 07:53:39 2021 kern.warn kernel: [    8.611314] mt7915e: probe of 0000:01:00.0 failed with error -22
   
This is 100% reproducible upon every boot, reboot as well as manually loading/removing the kernel module (/lib/modules/5.10.61/mt7615e.ko).
 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4004

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list