[FS#4115] Wireless device is always disabled when using STA+AP with Travelmate
openwrt-bugs at lists.openwrt.org
Fri Oct 29 09:34:06 PDT 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - ychromosome (ychromosome)
Attached to Project - OpenWrt/LEDE Project
Summary - Wireless device is always disabled when using STA+AP with Travelmate
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - High
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - root at OpenWrt:~# opkg list | grep ath10k
ath10k-board-qca4019 - 20201118-3
ath10k-firmware-qca4019-ct - 2020-11-08-1
kmod-ath10k-ct - 5.4.154+2021-09-22-e6a7d5b5-1
root at OpenWrt:~# cat /etc/openwrt_release
DISTRIB_DESCRIPTION='OpenWrt 21.02.1 r16325-88151b8303'
I am running Openwrt on my new Fritzbox 4040.
I would like to make it my camping wifi AP, therefore I have installed travelmate.
Sadly it does not work as it should.
After every reboot, every and every change to the "Client" or "Master" Device, the "Client" Wifi is always disabled and has to be enabled manually. Also sometimes it takes ages to even get it going - with constant resetting of the device.
Also if the client wifi channels change, the AP+STA "Construct" does not work most of the time, even if enabled manually. This is by far not an ideal experience.
I am not sure if it additionally has something to do with DFS, thats why I have left my bug report at the ath10-ct github open. But greearb meant I should also contact you guys here.
I have posted a syslog and dmesg there.
More information can be found at the following URL:
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs