[FS#4101] Meraki 5G radio : cannot use high channels (52 upwards)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Mark Shickell (mash2895) 

Attached to Project - OpenWrt/LEDE Project
Summary - Meraki 5G radio : cannot use high channels (52 upwards)
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - Name the tree/revision/version
OpenWrt 19.07.8 r11364-ef56c85848 / LuCI openwrt-19.07 branch git-21.189.23240-7b931da

Name the affected device
Meraki MR33

What does it do that it should not do / what does it not do that it should do
Channels 36-48 seem ok on the 5G radio but others don't work

Steps to reproduce
I set radio0 to channel 52 and the radio becomes inactive

What you have already done to workaround/fix the problem
fix to channel 48

Any additional info you think is important
I can get you one to play with remotely if it helps

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4101

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.