[FS#4159] hostapd-common update breaks WiFi completely when using the config file for the previous version

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sun Nov 28 12:29:48 PST 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#4159 - hostapd-common update breaks WiFi completely when using the config file for the previous version
User who did this - Michael C Wescott (wescott)

----------
Also occurs with 
  Buffalo WZR-600DHP
  OpenWrt 21.02.1 r16325-88151b8303

Upgrade to 

Syslog:
Sun Nov 28 20:13:03 2021 daemon.notice hostapd: wlan0: AP-DISABLED
Sun Nov 28 20:13:03 2021 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Sun Nov 28 20:13:03 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Sun Nov 28 20:13:03 2021 kern.info kernel: [  945.088067] device wlan0 left promiscuous mode
Sun Nov 28 20:13:03 2021 kern.info kernel: [  945.092801] br-lan: port 3(wlan0) entered disabled state
Sun Nov 28 20:13:03 2021 daemon.notice netifd: Network device 'wlan0' link is down
Sun Nov 28 20:13:03 2021 daemon.notice wpa_supplicant[3497]: Successfully initialized wpa_supplicant
Sun Nov 28 20:13:04 2021 daemon.notice netifd: radio0 (3520): Command failed: Invalid argument
Sun Nov 28 20:13:04 2021 daemon.notice netifd: radio1 (3521): Command failed: Invalid argument
Sun Nov 28 20:13:06 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 41: unknown configuration item 'snoop_iface'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 48: unknown configuration item 'vlan_no_bridge'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 50: unknown configuration item 'qos_map_set'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: 3 errors found in configuration file '/var/run/hostapd-phy0.conf'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Failed to set up interface with /var/run/hostapd-phy0.conf
Sun Nov 28 20:13:06 2021 daemon.notice netifd: radio0 (3545): Command failed: Invalid argument
Sun Nov 28 20:13:06 2021 daemon.notice netifd: radio0 (3545): Device setup failed: HOSTAPD_START_FAILED
Sun Nov 28 20:13:06 2021 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 39: unknown configuration item 'snoop_iface'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 46: unknown configuration item 'vlan_no_bridge'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Line 48: unknown configuration item 'qos_map_set'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: 3 errors found in configuration file '/var/run/hostapd-phy1.conf'
Sun Nov 28 20:13:06 2021 daemon.err hostapd: Failed to set up interface with /var/run/hostapd-phy1.conf
Sun Nov 28 20:13:06 2021 daemon.notice netifd: radio1 (3547): Command failed: Invalid argument
Sun Nov 28 20:13:06 2021 daemon.notice netifd: radio1 (3547): Device setup failed: HOSTAPD_START_FAILED
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4159#comment10355

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list