[FS#3575] sysupgrade failing on Ubiquiti UniFi AC HD

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Matthew Tracy (mtracy) 

Attached to Project - OpenWrt/LEDE Project
Summary - sysupgrade failing on Ubiquiti UniFi AC HD
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details -  - Device problem occurs on
Ubiquiti UniFi UAP-AC-HD

 - Software versions of OpenWrt/LEDE release, packages, etc.
Builds off a fresh clone of master, and current SNAPSHOT release from downloads.openwrt.org

 - Steps to reproduce
Following the commit notes from:

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=4e46beb31342a2b02e32185e91806093f68a77be

Using firmware compiled from master or using the SNAPSHOT downlaod, will boot and run successfully on UAP-AC-HD.

However, "sysupgrade -n" using the same SNAPSHOT build it is running is resulting in an instant crash and reboot.


 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3575

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.