[FS#3629] Not able to Flash Current OpenWRT 19.07.7 on Archer A7 v5
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Wed Feb 17 13:51:07 EST 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - skom91 (skom91)
Attached to Project - OpenWrt/LEDE Project
Summary - Not able to Flash Current OpenWRT 19.07.7 on Archer A7 v5
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - I have a TP-Link Archer A7 v5. I already had OpenWrt installed on it, but for testing a flashed back the Stock Firmware [1.1.0 Build 20201120 rel.50399(4555)]
After that i was not able to Flash the OpenWrt Firmware. I Have a serial console with the following output:
1.1.0 Build 20201120 rel.50399
upgrade firmware...
true
file_len:4491641
md5 verify ok!
[Error]sysmgr_proinfo_buildStruct(): 605 @ unknown id(device_name), skip it.
[Error]sysmgr_proinfo_buildStruct(): 605 @ unknown id(hw_id), skip it.
[Error]sysmgr_proinfo_buildStruct(): 605 @ unknown id(oem_id), skip it.
[Error]sysmgr_proinfo_buildStruct(): 605 @ unknown id(country), skip it.
[Error]sysmgr_proinfo_buildStruct(): 605 @ unknown id(hw_ver), skip it.
--------------------------------------------------------------------
vendorName : TP-Link
vendorUrl : www.tp-link.com
productName : Archer A7
productLanguage : EU
productId : 00070005
productVer : ff050000
specialId : 45550000
hwlId :
oemId :
--------------------------------------------------------------------
Firmwave supports, check OK.
(curFw_ver, newFw_ver) == (1.1, 1.0) [NM_Error](nm_checkSoftVer) 00848: Firmwave not supports, check failed.
[NM_Error](nm_checkUpdateContent) 01084: software version dismatched
[NM_Error](nm_buildUpgradeStruct) 01188: checkUpdateContent failed.
check firmware error!
[NM_Error](nvrammanager_verifyFirmware) 00476: upgradeFirmware failed
Is this maby because of the Version that is named in the Firmware and can this be fixed?
Thank you for your work!
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3629
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list