[FS#4204] the Device hardware version Info in bin file is Incorrect for tplink_cpe210-v1 (Attachment added)
openwrt-bugs at lists.openwrt.org
Sat Dec 25 00:07:50 PST 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - mxlong (mxlong)
Attached to Project - OpenWrt/LEDE Project
Summary - the Device hardware version Info in bin file is Incorrect for tplink_cpe210-v1
Task Type - Bug Report
Category - Packages
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-21.02
Due in Version - Undecided
Due Date - Undecided
Details - When I try to update the firmware to openwrt-21.02.1 in the TP-Link pharos UI, occurred the error "The hardware version is not supported."
I checked the Device hardware version and bin file.
They are match.
Device hardware version: tplink cpe210 v1
But when I open the bin file with Editor to check the hardware version of the bin file, I found the string:
"CPE__510__(TP-LINK|UN|N300-5):1.0\r\n" in the header of the file
but not "CPE__210__(TP-LINK|UN|N300-5):1.0\r\n"
So I think that the Device hardware version Info in bin file is not match for tplink_cpe210-v1.
Could you please check it?
Thank you very much!
Firmware OpenWrt Install URL: https://downloads.openwrt.org/releases/21.02.1/targets/ath79/generic/openwrt-21.02.1-ath79-generic-tplink_cpe210-v1-squashfs-factory.bin
Firmware OpenWrt snapshot Install URL: https://downloads.openwrt.org/snapshots/targets/ath79/generic/openwrt-ath79-generic-tplink_cpe210-v1-squashfs-factory.bin
One or more files have been attached.
More information can be found at the following URL:
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs