[FS#3382] Kernel doesn't find the 5GHz interface on MikroTik RB962UiGS-5HacT2HnT (hAP ac)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3382 - Kernel doesn't find the 5GHz interface on MikroTik RB962UiGS-5HacT2HnT (hAP ac)
User who did this - Sergey Alirzaev (l29ah)

----------
Nah, it only brings up b/g mode and whines in the log about other missing blobs:
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4799.340671] pci 0000:01:00.0: using irq 41 for pin 1
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4799.347171] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.628654] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.639534] ath10k_pci 0000:01:00.0: Falling back to user helper
Tue Oct 13 00:21:12 2020 daemon.err procd: Could not find firmware /lib/firmware/ath10k/pre-cal-pci-0000:01:00.0.bin: No such file or directory
Tue Oct 13 00:21:12 2020 kern.err kernel: [ 4799.716510] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.725978] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.736515] ath10k_pci 0000:01:00.0: Falling back to user helper
Tue Oct 13 00:21:12 2020 daemon.err procd: failed to write to /sys//devices/pci0000:01/0000:01:00.0/firmware/ath10k!pre-cal-pci-0000:01:00.0.bin/loading: Out of memory
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.888166] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4799.899057] ath10k_pci 0000:01:00.0: Falling back to user helper
Tue Oct 13 00:21:12 2020 daemon.err procd: Could not find firmware /lib/firmware/ath10k/QCA988X/hw2.0/firmware-6.bin: No such file or directory
Tue Oct 13 00:21:12 2020 kern.err kernel: [ 4800.001758] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4800.013162] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4800.022573] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4800.035690] ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00047 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 35bd9258
Tue Oct 13 00:21:12 2020 daemon.err procd: failed to write to /sys//devices/pci0000:01/0000:01:00.0/firmware/ath10k!QCA988X!hw2.0!firmware-6.bin/loading: Out of memory
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4800.131077] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
Tue Oct 13 00:21:12 2020 kern.warn kernel: [ 4800.141720] ath10k_pci 0000:01:00.0: Falling back to user helper
Tue Oct 13 00:21:12 2020 daemon.err procd: Could not find firmware /lib/firmware/ath10k/QCA988X/hw2.0/board-2.bin: No such file or directory
Tue Oct 13 00:21:12 2020 daemon.err procd: failed to write to /sys//devices/pci0000:01/0000:01:00.0/firmware/ath10k!QCA988X!hw2.0!board-2.bin/loading: Out of memory
Tue Oct 13 00:21:12 2020 kern.err kernel: [ 4800.227052] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
Tue Oct 13 00:21:12 2020 kern.info kernel: [ 4800.236401] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
Tue Oct 13 00:21:14 2020 kern.info kernel: [ 4801.339500] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476547] ath: EEPROM regdomain: 0x0
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476555] ath: EEPROM indicates default country code should be used
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476559] ath: doing EEPROM country->regdmn map search
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476572] ath: country maps to regdmn code: 0x3a
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476576] ath: Country alpha2 being used: US
Tue Oct 13 00:21:14 2020 kern.debug kernel: [ 4801.476580] ath: Regpair used: 0x3a

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3382#comment8891

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.