[FS#3471] Mikrotik RB911-5Hn propper nand detection failed

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sun Nov 29 10:36:23 EST 2020


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3471 - Mikrotik RB911-5Hn propper nand detection failed
User who did this - rogerpueyo (rogerpueyo)

----------
Hi,

// LAN & WLAN MAC addresses are correct
LEDs do work as expected (wifi signal strength included)  //

Brilliant! Sorry, I think I didn't upload the sysupgrade image. It's at https://we.tl/t-tDBQxBkZD1.

Could you please give the sysupgrade image a try and tell me if it works? Or you can compile it from my branch (linked above). Then the patch will be ready.

Can I add "Tested-by: Alexandros C. Couloumbis " to the commit?


// on the latest stable-19-trunk, ath9k is unable to successfully load on this arch

on your tftpboot-19-shapshot image you sent me though, ath9k is loading & is operational

what am I missing ?

personally, I find access to /proc/config.gz quite usefull

I am attaching a diff between the two dmesg from a vanilla 19-shnapshot & 19-rogerpueyo images
//

Sorry, this is difficult to understand! ;)

We have the 19.07.4-ar71xx release. As far as I can recall, that image made your device enter failsafe mode. Was it initramfs or sysupgrade?

I also sent you a 19.07-ar71xx image I compiled from the fresh 19.07 branch. This is, the same as above (19.07.4-ar71xx release) plus a few commits that have been added to the branch since the release. As far as I remember, that one worked. Therefore, if there's a 19.07.5-ar71xx release, it should work.

// dmesg-19-snapshot_vs_19-rogerpueyo-diff.txt //

I am not sure what's going on there, but in the "r11208-ce6496d796" image (I assume it is 19.07.4-ar71xx) the br-lan interface does not appear anywhere. This looks to me like entering failsafe.

Cheers!
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3471#comment9069

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list