[FS#3471] Mikrotik RB911-5Hn propper nand detection failed (Attachment added)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3471 - Mikrotik RB911-5Hn propper nand detection failed
User who did this - Alexandros C. Couloumbis (acoul)

----------
//⇒ Sorry I didn't make myself clear. On point 2) I was asking you to boot the new ath79 image for the sxt5n, which you can find at External Linkhttps://downloads.openwrt.org/snapshots/targets/ath79/mikrotik/openwrt-ath79-mikrotik-mikrotik_routerboard-sxt-5nd-r2-initramfs-kernel.bin. The ath79 has a new driver for MikroTik devices to expose the device information, calibration data, etc. under /sys/firmware/mikrotik/hard_config , which is not in ar71xx. //

I am attaching the /tmp/dmesg-rb911-trunk-r15003-b19a684f46.txt

the /sys/firmware/mikrotik directory remains empty. it may be due to the fact that the ath9k device is not recognized due to a bus incompatibility (see attached dmesg)

I am also attaching a full listing under the /sys/firmware (ls_laR_sys_firmware.txt)

sysupgrading openwrt-ath79-mikrotik-mikrotik_routerboard-sxt-5nd-r2-squashfs-sysupgrade.bin is not successful. I have not (yet) a serial access to the board to further debug the problem 
----------

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3471#comment9044

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.