[FS#3468] FriendlyElec NanoPi R2S mmc_host clock error

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - xiaobo (peterwillcn) 

Attached to Project - OpenWrt/LEDE Project
Summary - FriendlyElec NanoPi R2S mmc_host clock error
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details -  - FriendlyElec NanoPi R2S 
 - OpenWrt latest release

   
[    0.198279] rk_gmac-dwmac ff540000.ethernet: phy regulator is not available yet, deferred probing
[    0.200603] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2

[   35.824776] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   35.878229] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   36.037807] dwmmc_rockchip ff500000.dwmmc: Successfully tuned phase to 190
[   44.388814] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   44.548904] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   44.590737] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.
[   45.361969] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   45.520553] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   45.558426] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.
[   55.906843] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   56.087807] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   56.125748] dwmmc_rockchip ff500000.dwmmc: All phases work, using default phase 0.

 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3468

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.