[FS#3454] Netgear WNDR3800 VLAN switch broken 19.07.4

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sun Nov 15 21:41:42 EST 2020


There is a checkbox that needs to be checked to use all 4K vlans, can you 
confirm that that is set on your config?

David Lang

On Mon, 16 Nov 2020, OpenWrt Bugs wrote:

> Date: Mon, 16 Nov 2020 02:24:43 +0000
> From: OpenWrt Bugs <openwrt-bugs at lists.openwrt.org>
> To: openwrt-bugs at lists.openwrt.org
> Subject: [FS#3454] Netgear WNDR3800 VLAN switch broken 19.07.4
> 
> THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
>
> A new Flyspray task has been opened.  Details are below.
>
> User who did this - Daniel F. Dickinson (danielfdickinson)
>
> Attached to Project - OpenWrt/LEDE Project
> Summary - Netgear WNDR3800 VLAN switch broken 19.07.4
> Task Type - Bug Report
> Category - Base system
> Status - Unconfirmed
> Assigned To -
> Operating System - All
> Severity - Medium
> Priority - Very Low
> Reported Version - openwrt-19.07
> Due in Version - Undecided
> Due Date - Undecided
> Details - Supply the following if possible:
> - Device problem occurs on
> - Software versions of OpenWrt/LEDE release, packages, etc.
> - Steps to reproduce
>
>
> With the latest release of OpenWrt (19.07.4) using a VLAN > 16 fails.  It's rather strange as this was a problem years ago with the RTL8366s switch on these devices. I verified the firmware is reporting itself as 19.07.4 (I wondered if the files got mixed up and I was using some 18.xx version due to issues with the download site, but that is not the case).
>
> As long as the VLAN/VID are below 16 everything works properly, but for a VLAN > 16 (regardless of whether one keeps the VLAN
>
> _______________________________________________
> openwrt-bugs mailing list
> openwrt-bugs at lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-bugs
>



More information about the openwrt-bugs mailing list