[FS#3220] X86 kernel has no emmc support, cause it can't boot from emmc enabled devices

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Simon Li (xixixihaha) 

Attached to Project - OpenWrt/LEDE Project
Summary - X86 kernel has no emmc support, cause it can't boot from emmc enabled devices
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
 - Device problem occurs on: Z83II mini pc. https://www.minipcdb.com/articles/Meet-Z83II-Mini-PC
 - Software versions of OpenWrt/LEDE release, packages, etc.:  19.07.3, snapshots
 - Steps to reproduce:  Write to image to the embedded emmc disk and boot it.
   

I've tested both 19.07.3 and latest snapshots build of openwrt x86-64 build  on the Intel Z8350 fanless mini PC. Both failed, the kernel is boot up correctly, but the system hang at waiting for root device. 
I searched on google and found this post. Maybe there is need to patch the kernel to support booting from emmc devices.

https://forum.archive.openwrt.org/viewtopic.php?id=72195

Thanks!



More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3220

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.