[FS#3320] Ubiquiti Routerstation compilation produces no sysupgrade image anymore

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Tue Dec 8 13:41:33 EST 2020


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3320 - Ubiquiti Routerstation compilation produces no sysupgrade image anymore
User who did this - william wortel (wwortel)

----------
Cannot confirm or deny the exact start moment of the problem. Did not look into it as I went the trial and error way, before starting to understand what the underlying issues were.
Ever since OpenWrts with a sysupgrade that is aware of the problem but still with the problem in the kernel, it will reject the upgrade. You can safely test using the -T option; it will not write anything.

Much older firmwares will be OK. So the risk is in those of in-between when the problem existed but had not been discovered yet. To go a safe way I recommend the one-time factory upgrade.
The flash writing is then done by the bootloader. In case the RS(pro) is difficult to physically access but the power supply can be accessed there is a trick. A pin hole opening in the power supply and pressing a miniature switch behind it with a pin and connecting power will bring the RS in tftp upload mode. 

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3320#comment9120

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list