[OpenWrt-Users] no sit0 interface
Brian J. Murrell
brian at interlinx.bc.ca
Fri Jan 4 23:12:29 CET 2008
On Kamikaze I have the ipv6 kernel module loaded yet I don't seem to
have any sit* interfaces nor can I seem to create any:
# uname -r
2.6.23.1
# ip tunnel add tun6to4 mode sit ttl 64 remote any local 97.123.43.62
ioctl: No such device
# ip link set sit0 up
SIOCGIFFLAGS: No such device
# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 795 7 0 0 0 0 0 0 795 7 0 0 0 0 0 0
eth0:1703247193 9382722 0 0 0 0 0 21831 1665308337 9366620 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
eth0.0:975744128 8159391 0 0 0 0 0 123637 1409157816 8315314 0 0 0 0 0 0
eth0.1:558607311 1223079 0 0 0 0 0 6 212021326 1051204 0 0 0 0 0 0
br-lan:943105249 8159384 0 0 0 0 0 144135 1375895872 8315306 0 0 0 0 0 0
wmaster0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ppp0:10381896 54007 0 0 0 0 0 0 5665872 52355 0 0 0 0 0 0
tun0: 1489954 17986 0 0 0 0 0 0 1587994 5652 0 0 0 0 0 0
All of my other linux boxes with ipv6 seem to have one of these
interfaces. Any idea how I get one plumbed on openwrt?
Thanx,
b.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.openwrt.org/pipermail/openwrt-users/attachments/20080104/591b3753/attachment.pgp
More information about the openwrt-users
mailing list