[OpenWrt-Users] no wlan connection on my wrt54gl

[Ingo Jannick]

Hi

somehow it doesnt work out for me to access my router via wlan - and i
dont now whats the problem. the machine i want to hoock up is right now
connect via wlan to my speedport v701W. so that is out of question.

ad a) i dont see any signals on the webif of my eth1 interface -
strange?! My config is


> wl0_akm=psk
> wl0_antdiv=3
> wl0_ap_isolate=0
> wl0_bcn=100
> wl0_channel=7
> wl0_closed=0
> wl0_crypto=tkip
> wl0_distance=2000
> wl0_dtim=1
> wl0_frag=2346
> wl0_frameburst=1
> wl0_gmode=2
> wl0_gmode_protection=1
> wl0_ifname=eth1
> wl0_infra=1
> wl0_lazywds=0
> wl0_macmode=disabled
> wl0_mode=ap
> wl0_plcphdr=long
> wl0_radio=1
> wl0_rts=2347
> wl0_ssid=air.boxs
> wl0_txant=3
> wl0_txpwr=28
> wl0_wep=disabled
> wl0_wpa_psk=#########

ad b) or might it be the config for my dnsmasq ? i have no idea where to
switch on logging, to see whats (not) happening...


> # filter what we send upstream
> domain-needed
> bogus-priv
> filterwin2k
> localise-queries
> 
> # allow /etc/hosts and dhcp lookups via *.lan
> local=/lan/
> domain=lan
> expand-hosts
> no-negcache
> #resolv-file=/tmp/resolv.conf.auto
> 
> # enable dhcp (start,end,netmask,leasetime)
> dhcp-authoritative
> dhcp-leasefile=/tmp/dhcp.leases
> 
> #njays
> dhcp-range=lan,192.168.25.8,192.168.25.25,255.255.255.0,15min
> dhcp-option=lan,1,255.255.255.0
> dhcp-option=lan,3,192.168.25.7
> dhcp-option=lan,4,192.168.24.7
> dhcp-option=lan,6,192.168.25.7
> dhcp-option=lan,7,192.168.24.7:514
> dhcp-option=lan,15,njays
> dhcp-option=lan,28,192.168.25.255
> dhcp-option=lan,42,192.168.24.7
> 
> ##logging
> log-queries
> #log-dhcp
> 
> 

Would it help if i just reset all nvram vars (how would i do that??) and
flash a fresh ???

Any soggestions welcome!
Ingo

=>Whoever has lived long enough to find out what life is, knows how deep
a debt of gratitude we owe to Adam, the first great benefactor of our
race. He brought death into the world. -- Mark Twain, "Pudd'nhead
Wilson's Calendar"