[OpenWrt-Users] recap: should i be able to run the OpenWRT ImageBuilder for kamikaze?

[Georg Lippold]

A "make distclean" may help you. Remember to save your .config before
you do that. After a distclean you'll have to "make package/symlinks"
again. Alternatively, you may just checkout into a different directory
and copy your .config over.

Regards,

George

On 12/13/07 22:13, Robert P. J. Day wrote:
> On Wed, 12 Dec 2007, Georg Lippold wrote:
> 
>> I don't know the image-builder. But I assume the image-builder is
>> being built from the cvs (there is an option during make menuconfig
>> to build the image-builder). So there are two ways to go: either
>> compile the image-builder from source or just compile your custom
>> image from source (then you don't need the image-builder).
>>
>> Regards,
>>
>> Georg
>>
>> P.S: yes, just follow the instructions on dev.openwrt.org
> 
> just FYI, i've been playing with building my own images, and been
> having less than total success:
> 
> http://forum.openwrt.org/viewtopic.php?id=13735
> 
> but i'm going to keep hacking at it.  i'm sure i'm just doing
> something silly.
> 
> rday
> --
> ========================================================================
> Robert P. J. Day
> Linux Consulting, Training and Annoying Kernel Pedantry
> Waterloo, Ontario, CANADA
> 
> http://crashcourse.ca
> ========================================================================
> _______________________________________________
> openwrt-users mailing list
> openwrt-users at lists.openwrt.org
> http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
> 
>