[OpenWrt-Users] AR7 status (wrt DG834Gv3 particularly, WAG354G too)

[Marco Simioni]

I think so.
I had to build up a jtag interface and reflash with the original flash content.
If you open it, and connect an rs232 interface (see various
instructions on openwrt wiki), you can see that the bootloader boots
up, but there is no way to break it: in the original adam2, i remember
that you can break its execution pressing a key via rs232. In this
modified version, you can't, so you can't use the "command line"
commands, and you can't use the tftp (it's disabled).

Regards,
Marco


2007/8/22, Paul Jakma <paul at jakma.org>:
> On Tue, 21 Aug 2007, Marco Simioni wrote:
>
> > device uses. If i remember correctly, the dg834v3 has a modified
> > adam2 bootloader, with the tftp and ftp support disabled, so you
> > can't recover the device via ftp/tftp, like you would with the
> > original adam2 boot loader.
>
> Aha, so that's why I've been having problems trying to reflash my
> DG834Gv3...
>
> So I have to open it up?
>
> regards,
> --
> Paul Jakma      paul at clubi.ie   paul at jakma.org  Key ID: 64A2FF6A
> Fortune:
> An authority is a person who can tell you more about something than you
> really care to know.
> _______________________________________________
> openwrt-users mailing list
> openwrt-users at lists.openwrt.org
> http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
>