[OpenWrt-Users] Warning: unable to open an initial console on speedport w701v

Fri Aug 10 21:14:50 CEST 2007

Am Donnerstag, 9. August 2007 23:15 schrieb Jan Willies:
> Thomas Schäfer wrote:
> > the image you provided has the same problem
>
> I have set kernel_args to "init=/etc/preinit".

Thank you!

It is on the wiki, but i think not at the right place  ( chronological order).

My first openwrt-image is running, the output differs to yours, because of 
some things with mtd-partitions. 

so, now i will a little bit play with it.

Regards,
Thomas Schäfer

Eva_AVM >AVM decompress Kernel:
...................done
start kernel
Linux version 2.6.22.1 (thomas at witz) (gcc version 4.1.2) #1 Mon Aug 6 10:24:38 
7
CPU revision is: 00018448
Clocks: Async mode
Clocks: Setting DSP clock
Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 2, 
postdi0
Clocks: Setting CPU clock
Adjusted requested frequency 211000000 to 211968000
Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 1, 
postdi6
Clocks: Setting USB clock
Adjusted requested frequency 48000000 to 48076920
Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv = 1, 
postd5
TI AR7 (TNETD7200), ID: 0x002b, Revision: 0x11
Determined physical RAM map:
 memory: 02000000 @ 14000000 (usable)
Built 1 zonelists.  Total pages: 8128
Kernel command line: init=/etc/preinit console=ttyS0,38400n8r
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 105.984 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 28728k/32768k available (2077k kernel code, 4040k reserved, 427k 
data, )
Mount-cache hash table entries: 512
NET: Registered protocol family 16
vlynq0: regs 0x08611800, irq 29, mem 0x04000000
VLYNQ: Adjusted requested frequency 62500000 to 70656000
VLYNQ: Setting clock to 70656000 (clock divider 3)
vlynq0: linked
vlynq-pci: skipping unknown device 0000:0029 at vlynq0
registering PCI controller with io_map_base unset
Generic PHY: Registered new driver
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
ar7_wdt: failed to unlock WDT disable reg
ar7_wdt: failed to unlock WDT prescale reg
ar7_wdt: failed to unlock WDT change reg
ar7_wdt: timer margin 59 seconds (prescale 65535, change 57180, freq 62500000)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x8610e00 (irq = 15) is a TI-AR7
console handover: boot [early0] -> real [ttyS0]
Fixed PHY: Registered new driver
cpmac-mii: probed
cpmac: device eth0 (regs: 08610000, irq: 27, phy: fixed at 100:1, mac: 
00:1a:4f:bf)
physmap platform flash device: 00400000 at 10000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
NOR chip too large to fit in mapping. Attempting to cope...
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Reducing visibility of 8192KiB chip to 4096KiB
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Parsing AR7 partition map...
4 ar7part partitions found on MTD device physmap-flash.0
Creating 4 MTD partitions on "physmap-flash.0":
0x00000000-0x00010000 : "loader"
0x003f0000-0x00400000 : "config"
0x00010000-0x003f0000 : "linux"
0x000e0000-0x003f0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=210000, len=1E0000
0x00210000-0x003f0000 : "rootfs_data"
Registered led device: ar7:status
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 108k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
- preinit -
jffs2 not ready yet; using ramdisk
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
- init -
iinit started:  BusyBox v1.4.2 (2007-08-06 10:11:16 CEST) multi-call binary
Please press Enter to activate this console. ar7_wdt: failed to unlock WDT 
disag
ar7_wdt: failed to unlock WDT kick reg
PHY: fixed at 100:1 - Link is Up - 10/Half
NET: Registered protocol family 8
NET: Registered protocol family 20
PPP generic driver version 2.4.2
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit 
http://acx1n
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as 
nm
acx: running on a little-endian CPU
acx: PCI module v0.3.36 initialized, waiting for cards to probe...
registered device TI Avalanche SAR
Ohio250(7200/7100A2) detected
requesting firmware image "ar0700xx.bin"
Creating new root folder avalanche in the proc for the driver stats
Texas Instruments ATM driver: version:[7.01.00.10]
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs

BusyBox v1.4.2 (2007-08-06 10:11:16 CEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 KAMIKAZE (bleeding edge, r8346) -------------------
  * 10 oz Vodka       Shake well with ice and strain
  * 10 oz Triple sec  mixture into 10 shot glasses.
  * 10 oz lime juice  Salute!
 ---------------------------------------------------
root at OpenWrt:/# 