[OpenWrt-Users] Warning: unable to open an initial console on speedport w701v

Thomas Schäfer tschaefer at t-online.de
Thu Aug 9 21:11:27 CEST 2007


Hi Jan and list.

the image you provided has the same problem:

[FLASH:] SPANSION Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 127 sectors a 64kB)
[FLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz

Eva_AVM >AVM decompress Kernel:
................done
start kernel
Linux version 2.6.22.1 (jan at server) (gcc version 4.2.1) #1 Fri Aug 3 13:38:50 
C7
CPU revision is: 00018448
Clocks: Async mode
Clocks: Setting DSP clock
Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 2, 
postdi0
Clocks: Setting CPU clock
Adjusted requested frequency 211000000 to 211968000                             
...

NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 104k freed
Warning: unable to open an initial console.
  

My steps:


thomas at witz:~/openwrt/mailliste> ftp 192.168.178.1
Connected to 192.168.178.1.
220 ADAM2 FTP Server ready
Name (192.168.178.1:thomas): adam2
331 Password required for adam2
Password:
230 User adam2 successfully logged in
Remote system type is AVM.
ftp> passiv
Passive mode: off; fallback to active mode: off.
ftp> passiv
Passive mode: on; fallback to active mode: on.
ftp> bin
200 Type set to BINARY
ftp> quote MEDIA FLSH
200 Media set to MEDIA_FLASH
ftp> put openwrt-ar7-2.6-squashfs.bin mtd1
local: openwrt-ar7-2.6-squashfs.bin remote: mtd1
502 Command not implemented
227 Entering Passive Mode (192,168,178,1,6,51)
150 Opening BINARY data connection
100% |*************************************|  2048 KB  186.52 KB/s    00:00 
ETA
226 Transfer complete
2097156 bytes sent in 00:11 (184.79 KB/s)
ftp> bye
221 Thank you for using the FTP service on ADAM2
thomas at witz:~/openwrt/mailliste>  

Then "restart" at the console. 
Is there something with configuration of the mtds?

Regards,
Thomas 





More information about the openwrt-users mailing list