HPE 1920-8G-PoE+ 180W (JG922A) PoE problems - after cold boot

[Janusz Dziedzic]

niedz., 20 paź 2024 o 14:16 Janusz Dziedzic
<janusz.dziedzic at gmail.com> napisał(a):
>
> Works fine directly after OpenWrt flash (restart without power off/on).
> But after cold boot see this problems.
> Any idea?
>
>
> [  117.066131] switch: port 7(lan7) entered blocking state
> [  117.083632] switch: port 7(lan7) entered forwarding state
> [  118.469049] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported
> [  118.490963] rtl83xx_fib_event: FIB_RULE ADD/DEL for IPv6 not supported
>
> root at OpenWrt:~# logread |grep poe
> Thu Jan  1 00:01:48 1970 daemon.notice realtek-poe: MCU rejected
> command: request-incomplete
> Thu Jan  1 00:01:48 1970 daemon.notice realtek-poe:     CMD:    23 0c
> ff ff ff ff ff ff ff ff ff 26
> Thu Jan  1 00:01:48 1970 daemon.notice realtek-poe:     reply:  fd ff
> ff ff ff ff ff ff ff ff ff f3
> Thu Jan  1 00:01:52 1970 daemon.notice realtek-poe: MCU rejected
> command: request-incomplete
> Thu Jan  1 00:01:52 1970 daemon.notice realtek-poe:     CMD:    28 15
> 00 01 01 01 02 01 03 01 ff 46
> Thu Jan  1 00:01:52 1970 daemon.notice realtek-poe:     reply:  fd ff
> ff ff ff ff ff ff ff ff ff f3
> Thu Jan  1 00:01:52 1970 daemon.err realtek-poe: received unsolicited reply
> root at OpenWrt:~#
> root at OpenWrt:~#
> root at OpenWrt:~# ubus call system board
> {
>        "kernel": "6.6.57",
>        "hostname": "OpenWrt",
>        "system": "RTL8380",
>        "model": "HPE 1920-8G-PoE+ 180W (JG922A)",
>        "board_name": "hpe,1920-8g-poe-180w",
>        "rootfs_type": "initramfs",
>        "release": {
>                "distribution": "OpenWrt",
>                "version": "SNAPSHOT",
>                "revision": "r27647+185-b5ffbe7c75",
>                "target": "realtek/rtl838x",
>                "description": "OpenWrt SNAPSHOT r27647+185-b5ffbe7c75"
>        }
> }
> root at OpenWrt:~#
>

root at OpenWrt:/# ubus call poe info
{
       "firmware": "v20.3",
       "mcu": "Nuvoton M05xx LAN Microcontroller",
       "budget": 170.000000,
       "consumption": 0.000000,
       "ports": {
               "lan1": {
                       "priority": 2,
                       "mode": "PoE+",
                       "status": "Searching"
               }
       }
}

Seems, don't deliver power - does it ever works before?

BR
Janusz