[RFC PATCH] hostapd: Add support for APuP
gio at eigenlab.org
gio at eigenlab.org
Fri May 10 10:48:35 PDT 2024
From: Gioacchino Mazzurco <gio at polymathes.cc>
Add support for hostapd Access Point Micro Peering
Signed-off-by: Gioacchino Mazzurco <gio at polymathes.cc>
---
.../wifi-scripts/files/lib/netifd/hostapd.sh | 16 +-
package/network/services/hostapd/Makefile | 2 +-
...ment-APuP-Access-Point-Micro-Peering.patch | 426 ++++++++++++++++++
...us-notification-when-a-peer-comes-up.patch | 74 +++
...-ucode-hook-for-when-a-peer-comes-up.patch | 83 ++++
5 files changed, 599 insertions(+), 2 deletions(-)
create mode 100644 package/network/services/hostapd/patches/780-Implement-APuP-Access-Point-Micro-Peering.patch
create mode 100644 package/network/services/hostapd/patches/790-APuP-add-ubus-notification-when-a-peer-comes-up.patch
create mode 100644 package/network/services/hostapd/patches/800-APuP-add-ucode-hook-for-when-a-peer-comes-up.patch
diff --git a/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh
index 763702e76b..40266db065 100644
--- a/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh
+++ b/package/network/config/wifi-scripts/files/lib/netifd/hostapd.sh
@@ -383,6 +383,9 @@ hostapd_common_add_bss_config() {
config_add_string fils_dhcp
config_add_int ocv
+
+ config_add_boolean apup
+ config_add_string apup_peer_ifname_prefix
}
hostapd_set_vlan_file() {
@@ -569,7 +572,7 @@ hostapd_set_bss_options() {
ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \
multicast_to_unicast_all proxy_arp per_sta_vif \
eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \
- vendor_elements fils ocv
+ vendor_elements fils ocv apup
set_default fils 0
set_default isolate 0
@@ -593,6 +596,7 @@ hostapd_set_bss_options() {
set_default airtime_bss_weight 0
set_default airtime_bss_limit 0
set_default eap_server 0
+ set_default apup 0
/usr/sbin/hostapd -vfils || fils=0
@@ -1163,6 +1167,16 @@ hostapd_set_bss_options() {
append bss_conf "per_sta_vif=$per_sta_vif" "$N"
fi
+ if [ "$apup" -gt 0 ]; then
+ append bss_conf "apup=$apup" "$N"
+
+ local apup_peer_ifname_prefix
+ json_get_vars apup_peer_ifname_prefix
+ if [ -n "$apup_peer_ifname_prefix" ] ; then
+ append bss_conf "apup_peer_ifname_prefix=$apup_peer_ifname_prefix" "$N"
+ fi
+ fi
+
json_get_values opts hostapd_bss_options
for val in $opts; do
append bss_conf "$val" "$N"
diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile
index 0171bc0edc..1eaa67f992 100644
--- a/package/network/services/hostapd/Makefile
+++ b/package/network/services/hostapd/Makefile
@@ -87,7 +87,7 @@ DRIVER_MAKEOPTS= \
CONFIG_IEEE80211AC=$(HOSTAPD_IEEE80211AC) \
CONFIG_IEEE80211AX=$(HOSTAPD_IEEE80211AX) \
CONFIG_MBO=$(CONFIG_WPA_MBO_SUPPORT) \
- CONFIG_UCODE=y
+ CONFIG_UCODE=y CONFIG_APUP=y
ifeq ($(SSL_VARIANT),openssl)
DRIVER_MAKEOPTS += CONFIG_TLS=openssl CONFIG_SAE=y
diff --git a/package/network/services/hostapd/patches/780-Implement-APuP-Access-Point-Micro-Peering.patch b/package/network/services/hostapd/patches/780-Implement-APuP-Access-Point-Micro-Peering.patch
new file mode 100644
index 0000000000..db3a05e3e6
--- /dev/null
+++ b/package/network/services/hostapd/patches/780-Implement-APuP-Access-Point-Micro-Peering.patch
@@ -0,0 +1,426 @@
+From 99a9a4e97b4964e12749766de9c57bb7e59e740e Mon Sep 17 00:00:00 2001
+From: Gioacchino Mazzurco <gio at polymathes.cc>
+Date: Mon, 6 May 2024 13:53:48 +0200
+Subject: [PATCH 1/3] Implement APuP Access Point Micro Peering
+
+Access Point Micro Peering is a simpler and hopefully more useful successor to
+Ad Hoc, Wireless Distribution System, 802.11s mesh mode, Multi-AP and EasyMesh.
+When enabled almost plain APs communicate between them via 4-address mode,
+like in WDS but all of them are AP, so they can eventually communicate also with
+plain stations and more AP nodes in sight, without more trickery.
+APuP has low hardware requirements, just AP mode support + 4-address mode, and
+no more unnecessary complications, like hardcoded bridging or routing algorithm
+in WiFi stack.
+For each AP in sight an interface is created, and then it can be used as
+convenient in each case, bridging, routing etc.
+Those interfaces could be simply bridged in a trivial topology (which happens
+automatically if wds_bridge is not an empty string), or feeded to a
+routing daemon.
+
+Signed-off-by: Gioacchino Mazzurco <gio at polymathes.cc>
+---
+ hostapd/Makefile | 5 ++
+ hostapd/config_file.c | 8 ++
+ src/ap/ap_config.h | 29 +++++++
+ src/ap/ap_drv_ops.c | 31 +++++++-
+ src/ap/ap_drv_ops.h | 3 +
+ src/ap/apup.c | 149 +++++++++++++++++++++++++++++++++++
+ src/ap/apup.h | 25 ++++++
+ src/ap/ieee802_11.c | 11 ++-
+ src/ap/ieee802_11.h | 2 +
+ src/drivers/driver.h | 2 +-
+ src/drivers/driver_nl80211.c | 14 +---
+ 11 files changed, 262 insertions(+), 17 deletions(-)
+ create mode 100644 src/ap/apup.c
+ create mode 100644 src/ap/apup.h
+
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -1415,6 +1415,11 @@ ifdef CONFIG_NO_TKIP
+ CFLAGS += -DCONFIG_NO_TKIP
+ endif
+
++ifdef CONFIG_APUP
++CFLAGS += -DCONFIG_APUP
++OBJS += ../src/ap/apup.o
++endif
++
+ $(DESTDIR)$(BINDIR)/%: %
+ install -D $(<) $(@)
+
+--- a/hostapd/config_file.c
++++ b/hostapd/config_file.c
+@@ -5058,6 +5058,14 @@ static int hostapd_config_fill(struct ho
+ bss->mld_indicate_disabled = atoi(pos);
+ #endif /* CONFIG_TESTING_OPTIONS */
+ #endif /* CONFIG_IEEE80211BE */
++#ifdef CONFIG_APUP
++ } else if (os_strcmp(buf, "apup") == 0) {
++ bss->apup = !!atoi(pos);
++ if(bss->apup) bss->wds_sta = 1;
++ } else if (os_strcmp(buf, "apup_peer_ifname_prefix") == 0) {
++ os_strlcpy( bss->apup_peer_ifname_prefix,
++ pos, sizeof(bss->apup_peer_ifname_prefix) );
++#endif // def CONFIG_APUP
+ } else {
+ wpa_printf(MSG_ERROR,
+ "Line %d: unknown configuration item '%s'",
+--- a/src/ap/ap_config.h
++++ b/src/ap/ap_config.h
+@@ -970,6 +970,35 @@ struct hostapd_bss_config {
+ bool mld_indicate_disabled;
+ #endif /* CONFIG_TESTING_OPTIONS */
+ #endif /* CONFIG_IEEE80211BE */
++
++#ifdef CONFIG_APUP
++ /**
++ * Access Point Micro Peering
++ * A simpler and more useful successor to Ad Hoc,
++ * Wireless Distribution System, 802.11s mesh mode, Multi-AP and EasyMesh.
++ *
++ * Almost plain APs communicate between them via 4-address mode, like in WDS
++ * but all of them are AP, so they can eventually communicate also with
++ * plain stations and more AP nodes in sight.
++ * Low hardware requirements, just AP mode support + 4-address mode, and no
++ * more unnecessary complications, like hardcoded bridging or routing
++ * algorithm in WiFi stack.
++ * For each AP in sight an interface is created, and then it can be used as
++ * convenient in each case, bridging, routing etc.
++ */
++ bool apup;
++
++ /**
++ * In 4-address mode each peer AP in sight is associated to its own
++ * interface so we have more flexibility in "user-space".
++ * Those interfaces could be simply bridged in a trivial topology (which
++ * happens automatically if wds_bridge is not an empty string), or feeded to
++ * a routing daemon.
++ *
++ * If not defined interface names are generated following the WDS convention.
++ */
++ char apup_peer_ifname_prefix[IFNAMSIZ + 1];
++#endif /* CONFIG_APUP */
+ };
+
+ /**
+--- a/src/ap/ap_drv_ops.c
++++ b/src/ap/ap_drv_ops.c
+@@ -381,12 +381,39 @@ int hostapd_vlan_if_remove(struct hostap
+ int hostapd_set_wds_sta(struct hostapd_data *hapd, char *ifname_wds,
+ const u8 *addr, int aid, int val)
+ {
+- const char *bridge = NULL;
+-
+ if (hapd->driver == NULL || hapd->driver->set_wds_sta == NULL)
+ return -1;
++
++ const char *bridge = NULL;
++ char ifName[IFNAMSIZ + 1];
++
++ int mRet = 0;
++
++#ifdef CONFIG_APUP
++ if(hapd->conf->apup && hapd->conf->apup_peer_ifname_prefix[0])
++ {
++ mRet = os_snprintf(
++ ifName, sizeof(ifName), "%s%d",
++ hapd->conf->apup_peer_ifname_prefix, aid );
++ }
++ else
++#endif // def CONFIG_APUP
++ mRet = os_snprintf(
++ ifName, sizeof(ifName), "%s.sta%d",
++ hapd->conf->iface, aid );
++
++ if (mRet >= (int) sizeof(ifName))
++ wpa_printf( MSG_WARNING,
++ "nl80211: WDS interface name was truncated" );
++ else if (mRet < 0)
++ return mRet;
++
++ // Pass back to the caller the resulting interface name
++ if (ifname_wds) os_strlcpy(ifname_wds, ifName, IFNAMSIZ + 1);
++
+ if (hapd->conf->wds_bridge[0])
+ bridge = hapd->conf->wds_bridge;
++
+ return hapd->driver->set_wds_sta(hapd->drv_priv, addr, aid, val,
+ bridge, ifname_wds);
+ }
+--- a/src/ap/ap_drv_ops.h
++++ b/src/ap/ap_drv_ops.h
+@@ -33,6 +33,9 @@ int hostapd_set_drv_ieee8021x(struct hos
+ int enabled);
+ int hostapd_vlan_if_add(struct hostapd_data *hapd, const char *ifname);
+ int hostapd_vlan_if_remove(struct hostapd_data *hapd, const char *ifname);
++
++/** @param val as per nl80211 driver implementation, 1 means add 0 means remove
++ */
+ int hostapd_set_wds_sta(struct hostapd_data *hapd, char *ifname_wds,
+ const u8 *addr, int aid, int val);
+ int hostapd_sta_add(struct hostapd_data *hapd,
+--- /dev/null
++++ b/src/ap/apup.c
+@@ -0,0 +1,149 @@
++/*
++ * hostapd / APuP Access Point Micro Peering
++ *
++ * Copyright (C) 2023-2024 Gioacchino Mazzurco <gio at polymathes.cc>
++ * Copyright (C) 2023-2024 Asociación Civil Altermundi <info at altermundi.net>
++ *
++ * This software may be distributed under the terms of the BSD license.
++ * See README for more details.
++ */
++
++/* Be extremely careful altering include order, move just one in the wrong place
++ * and you will start getting a bunch of error of undefined bool, size_t etc. */
++
++#include "utils/includes.h"
++#include "utils/common.h"
++#include "utils/os.h"
++
++#include "apup.h"
++
++#include "drivers/driver.h"
++#include "wpa_auth.h"
++#include "ap_mlme.h"
++#include "ieee802_11.h"
++#include "ap_drv_ops.h"
++
++void apup_process_beacon(struct hostapd_data *hapd,
++ const struct ieee80211_mgmt *mgmt, size_t len,
++ const struct ieee802_11_elems *elems )
++{
++ if(!os_memcmp(hapd->own_addr, mgmt->bssid, ETH_ALEN))
++ {
++ wpa_printf( MSG_WARNING,
++ "apup_process_beacon(...) own beacon elems.ssid %.*s",
++ (int) elems->ssid_len, elems->ssid );
++ return;
++ }
++
++ if( elems->ssid_len != hapd->conf->ssid.ssid_len ||
++ os_memcmp(elems->ssid, hapd->conf->ssid.ssid, elems->ssid_len) )
++ return;
++
++ struct sta_info* sta_ret = ap_get_sta(hapd, mgmt->bssid);
++ if(sta_ret) return;
++
++ sta_ret = ap_sta_add(hapd, mgmt->bssid);
++
++ /* TODO: this has been added just to making compiler happy after breaking
++ * changes introduced in 11a607d121df512e010148bedcb4263a03329dc7 to support
++ * IEEE80211BE Multi Link Operation. Look at that commit with more time and
++ * understand what could be a proper implementation in this context too
++ */
++ const u8 *mld_link_addr = NULL;
++ bool mld_link_sta = false;
++
++ /* First add the station without more information */
++ int aRet = hostapd_sta_add(
++ hapd, mgmt->bssid, sta_ret->aid, 0,
++ NULL, 0, 0, NULL, NULL, NULL, 0, NULL, 0, NULL,
++ sta_ret->flags, 0, 0, 0,
++ 0, // 0 add, 1 set
++ mld_link_addr, mld_link_sta );
++
++ sta_ret->flags |= WLAN_STA_AUTH;
++ wpa_auth_sm_event(sta_ret->wpa_sm, WPA_AUTH);
++
++ /* TODO: Investigate if supporting WPA or other encryption method is
++ * possible */
++ sta_ret->auth_alg = WLAN_AUTH_OPEN;
++ mlme_authenticate_indication(hapd, sta_ret);
++
++ sta_ret->capability = le_to_host16(mgmt->u.beacon.capab_info);
++
++ if (sta_ret->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
++ sta_ret->flags |= WLAN_STA_SHORT_PREAMBLE;
++ else
++ sta_ret->flags &= ~WLAN_STA_SHORT_PREAMBLE;
++
++ copy_supp_rates(hapd, sta_ret, elems);
++
++ /* Whithout this flag copy_sta_[v]ht_capab will disable [V]HT
++ * capabilities even if available */
++ if(elems->ht_capabilities || elems->vht_capabilities)
++ sta_ret->flags |= WLAN_STA_WMM;
++
++ copy_sta_ht_capab(hapd, sta_ret, elems->ht_capabilities);
++#ifdef CONFIG_IEEE80211AC
++ copy_sta_vht_capab(hapd, sta_ret, elems->vht_capabilities);
++ copy_sta_vht_oper(hapd, sta_ret, elems->vht_operation);
++ copy_sta_vendor_vht(hapd, sta_ret, elems->vendor_vht, elems->vendor_vht_len);
++#endif // def CONFIG_IEEE80211AC
++#ifdef CONFIG_IEEE80211AX
++ copy_sta_he_6ghz_capab(hapd, sta_ret, elems->he_6ghz_band_cap);
++#endif // def CONFIG_IEEE80211AX
++#ifdef CONFIG_IEEE80211BE
++ copy_sta_eht_capab( hapd, sta_ret,
++ IEEE80211_MODE_AP, // TODO: Make sure is the right value
++ elems->he_capabilities, elems->he_capabilities_len,
++ elems->eht_capabilities, elems->eht_capabilities_len);
++#endif //def CONFIG_IEEE80211BE
++
++ update_ht_state(hapd, sta_ret);
++
++ if (hostapd_get_aid(hapd, sta_ret) < 0)
++ {
++ wpa_printf( MSG_INFO, "apup_process_beacon(...) No room for more AIDs");
++ return;
++ }
++
++ sta_ret->flags |= WLAN_STA_ASSOC_REQ_OK;
++
++ /* Make sure that the previously registered inactivity timer will not
++ * remove the STA immediately. */
++ sta_ret->timeout_next = STA_NULLFUNC;
++
++ sta_ret->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
++
++ /* Then set the paramethers */
++ int sRet = hostapd_sta_add(
++ hapd, mgmt->bssid, sta_ret->aid,
++ sta_ret->capability,
++ sta_ret->supported_rates, sta_ret->supported_rates_len,
++ 0, // u16 listen_interval TODO ?
++ sta_ret->ht_capabilities,
++ sta_ret->vht_capabilities,
++ sta_ret->he_capab, sta_ret->he_capab_len,
++ sta_ret->eht_capab, sta_ret->eht_capab_len,
++ sta_ret->he_6ghz_capab,
++ sta_ret->flags,
++ 0, // u8 qosinfo
++ sta_ret->vht_opmode,
++ 0, // int supp_p2p_ps
++ 1, // 0 add, 1 set
++ mld_link_addr, mld_link_sta );
++
++ ap_sta_set_authorized(hapd, sta_ret, 1);
++ hostapd_set_sta_flags(hapd, sta_ret);
++
++ char mIfname[IFNAMSIZ + 1];
++ os_memset(mIfname, 0, IFNAMSIZ + 1);
++
++ // last param 1 means add 0 means remove
++ int mRet = hostapd_set_wds_sta(
++ hapd, mIfname, mgmt->bssid, sta_ret->aid, 1 );
++
++ wpa_printf( MSG_INFO,
++ "apup_process_beacon(...) Added APuP peer at %s with flags: %d,"
++ " capabilities %d",
++ mIfname, sta_ret->flags, sta_ret->capability );
++}
+--- /dev/null
++++ b/src/ap/apup.h
+@@ -0,0 +1,25 @@
++/*
++ * hostapd / APuP Access Point Micro Peering
++ *
++ * Copyright (C) 2023-2024 Gioacchino Mazzurco <gio at polymathes.cc>
++ * Copyright (C) 2023-2024 Asociación Civil Altermundi <info at altermundi.net>
++ *
++ * This software may be distributed under the terms of the BSD license.
++ * See README for more details.
++ */
++
++/* Be extremely careful altering include order, move just one in the wrong place
++ * and you will start getting a bunch of error of undefined bool, size_t etc. */
++
++#include "utils/includes.h"
++#include "utils/common.h"
++
++#include "hostapd.h"
++#include "common/ieee802_11_defs.h"
++
++/** When beacons from other Access Point are received, if the SSID is matching
++ * add them as APuP peers (aka WDS STA to our own AP) the same happens on the
++ * peer when receiving our beacons */
++void apup_process_beacon(struct hostapd_data *hapd,
++ const struct ieee80211_mgmt *mgmt, size_t len,
++ const struct ieee802_11_elems *elems );
+--- a/src/ap/ieee802_11.c
++++ b/src/ap/ieee802_11.c
+@@ -59,6 +59,9 @@
+ #include "nan_usd_ap.h"
+ #include "pasn/pasn_common.h"
+
++#ifdef CONFIG_APUP
++# include "apup.h"
++#endif // def CONFIG_APUP
+
+ #ifdef CONFIG_FILS
+ static struct wpabuf *
+@@ -3469,8 +3472,8 @@ static u16 check_multi_ap(struct hostapd
+ }
+
+
+-static u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
+- struct ieee802_11_elems *elems)
++u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
++ const struct ieee802_11_elems *elems)
+ {
+ /* Supported rates not used in IEEE 802.11ad/DMG */
+ if (hapd->iface->current_mode &&
+@@ -5927,6 +5930,10 @@ static void handle_beacon(struct hostapd
+ 0);
+
+ ap_list_process_beacon(hapd->iface, mgmt, &elems, fi);
++
++#ifdef CONFIG_APUP
++ if(hapd->conf->apup) apup_process_beacon(hapd, mgmt, len, &elems);
++#endif // def CONFIG_APUP
+ }
+
+
+--- a/src/ap/ieee802_11.h
++++ b/src/ap/ieee802_11.h
+@@ -108,6 +108,8 @@ int hostapd_process_ml_assoc_req_addr(st
+ const u8 *basic_mle, size_t basic_mle_len,
+ u8 *mld_addr);
+ int hostapd_get_aid(struct hostapd_data *hapd, struct sta_info *sta);
++u16 copy_supp_rates(struct hostapd_data *hapd, struct sta_info *sta,
++ const struct ieee802_11_elems *elems);
+ u16 copy_sta_ht_capab(struct hostapd_data *hapd, struct sta_info *sta,
+ const u8 *ht_capab);
+ u16 copy_sta_vendor_vht(struct hostapd_data *hapd, struct sta_info *sta,
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -3976,7 +3976,7 @@ struct wpa_driver_ops {
+ * Returns: 0 on success, -1 on failure
+ */
+ int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val,
+- const char *bridge_ifname, char *ifname_wds);
++ const char *bridge_ifname, const char *ifname_wds);
+
+ /**
+ * send_action - Transmit an Action frame
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -8415,24 +8415,14 @@ static int have_ifidx(struct wpa_driver_
+
+
+ static int i802_set_wds_sta(void *priv, const u8 *addr, int aid, int val,
+- const char *bridge_ifname, char *ifname_wds)
++ const char *bridge_ifname, const char *ifname_wds)
+ {
+ struct i802_bss *bss = priv;
+ struct wpa_driver_nl80211_data *drv = bss->drv;
+- char name[IFNAMSIZ + 1];
++ const char *name = ifname_wds; // Kept to reduce changes to the minimum
+ union wpa_event_data event;
+ int ret;
+
+- ret = os_snprintf(name, sizeof(name), "%s.sta%d", bss->ifname, aid);
+- if (ret >= (int) sizeof(name))
+- wpa_printf(MSG_WARNING,
+- "nl80211: WDS interface name was truncated");
+- else if (ret < 0)
+- return ret;
+-
+- if (ifname_wds)
+- os_strlcpy(ifname_wds, name, IFNAMSIZ + 1);
+-
+ wpa_printf(MSG_DEBUG, "nl80211: Set WDS STA addr=" MACSTR
+ " aid=%d val=%d name=%s", MAC2STR(addr), aid, val, name);
+ if (val) {
diff --git a/package/network/services/hostapd/patches/790-APuP-add-ubus-notification-when-a-peer-comes-up.patch b/package/network/services/hostapd/patches/790-APuP-add-ubus-notification-when-a-peer-comes-up.patch
new file mode 100644
index 0000000000..86da7d0e5e
--- /dev/null
+++ b/package/network/services/hostapd/patches/790-APuP-add-ubus-notification-when-a-peer-comes-up.patch
@@ -0,0 +1,74 @@
+From 82eddeb699fcdb041ad21f4dd6cd97cf674b9685 Mon Sep 17 00:00:00 2001
+From: Gioacchino Mazzurco <gio at polymathes.cc>
+Date: Tue, 7 May 2024 10:37:54 +0200
+Subject: [PATCH 2/3] APuP add ubus notification when a peer comes up
+
+The notification ones get looks like
+{ "apup-newpeer": {"address":"02:0a:ab:45:5a:ab","ifname":"wlan0.peer1"} }
+
+Signed-off-by: Gioacchino Mazzurco <gio at polymathes.cc>
+---
+ src/ap/apup.c | 8 ++++++++
+ src/ap/ubus.c | 15 +++++++++++++++
+ src/ap/ubus.h | 5 +++++
+ 3 files changed, 28 insertions(+)
+
+--- a/src/ap/apup.c
++++ b/src/ap/apup.c
+@@ -23,6 +23,10 @@
+ #include "ieee802_11.h"
+ #include "ap_drv_ops.h"
+
++#ifdef UBUS_SUPPORT
++# include "ubus.h"
++#endif
++
+ void apup_process_beacon(struct hostapd_data *hapd,
+ const struct ieee80211_mgmt *mgmt, size_t len,
+ const struct ieee802_11_elems *elems )
+@@ -142,6 +146,10 @@ void apup_process_beacon(struct hostapd_
+ int mRet = hostapd_set_wds_sta(
+ hapd, mIfname, mgmt->bssid, sta_ret->aid, 1 );
+
++#ifdef UBUS_SUPPORT
++ hostapd_ubus_notify_apup_newpeer(hapd, mgmt->bssid, mIfname);
++#endif
++
+ wpa_printf( MSG_INFO,
+ "apup_process_beacon(...) Added APuP peer at %s with flags: %d,"
+ " capabilities %d",
+--- a/src/ap/ubus.c
++++ b/src/ap/ubus.c
+@@ -2004,3 +2004,18 @@ int hostapd_ubus_notify_bss_transition_q
+ return ureq.resp;
+ #endif
+ }
++
++#ifdef CONFIG_APUP
++void hostapd_ubus_notify_apup_newpeer(
++ struct hostapd_data *hapd, const u8 *addr, const char *ifname )
++{
++ if (!hapd->ubus.obj.has_subscribers)
++ return;
++
++ blob_buf_init(&b, 0);
++ blobmsg_add_macaddr(&b, "address", addr);
++ blobmsg_add_string(&b, "ifname", ifname);
++
++ ubus_notify(ctx, &hapd->ubus.obj, "apup-newpeer", b.head, -1);
++}
++#endif // def CONFIG_APUP
+--- a/src/ap/ubus.h
++++ b/src/ap/ubus.h
+@@ -71,6 +71,11 @@ int hostapd_ubus_notify_bss_transition_q
+ void hostapd_ubus_notify_authorized(struct hostapd_data *hapd, struct sta_info *sta,
+ const char *auth_alg);
+
++#ifdef CONFIG_APUP
++void hostapd_ubus_notify_apup_newpeer(
++ struct hostapd_data *hapd, const u8 *addr, const char *ifname );
++#endif // def CONFIG_APUP
++
+ #else
+
+ struct hostapd_ubus_bss {};
diff --git a/package/network/services/hostapd/patches/800-APuP-add-ucode-hook-for-when-a-peer-comes-up.patch b/package/network/services/hostapd/patches/800-APuP-add-ucode-hook-for-when-a-peer-comes-up.patch
new file mode 100644
index 0000000000..ab89eb9543
--- /dev/null
+++ b/package/network/services/hostapd/patches/800-APuP-add-ucode-hook-for-when-a-peer-comes-up.patch
@@ -0,0 +1,83 @@
+From f5682a5f73108fa43977864351cd8f770f10aee0 Mon Sep 17 00:00:00 2001
+From: Gioacchino Mazzurco <gio at polymathes.cc>
+Date: Tue, 7 May 2024 11:54:23 +0200
+Subject: [PATCH 3/3] APuP add ucode hook for when a peer comes up
+
+Signed-off-by: Gioacchino Mazzurco <gio at polymathes.cc>
+---
+ src/ap/apup.c | 16 ++++++++++++----
+ src/ap/ucode.c | 18 ++++++++++++++++++
+ src/ap/ucode.h | 4 ++++
+ 3 files changed, 34 insertions(+), 4 deletions(-)
+
+--- a/src/ap/apup.c
++++ b/src/ap/apup.c
+@@ -27,6 +27,10 @@
+ # include "ubus.h"
+ #endif
+
++#ifdef UCODE_SUPPORT
++# include "ucode.h"
++#endif
++
+ void apup_process_beacon(struct hostapd_data *hapd,
+ const struct ieee80211_mgmt *mgmt, size_t len,
+ const struct ieee802_11_elems *elems )
+@@ -146,12 +150,16 @@ void apup_process_beacon(struct hostapd_
+ int mRet = hostapd_set_wds_sta(
+ hapd, mIfname, mgmt->bssid, sta_ret->aid, 1 );
+
+-#ifdef UBUS_SUPPORT
+- hostapd_ubus_notify_apup_newpeer(hapd, mgmt->bssid, mIfname);
+-#endif
+-
+ wpa_printf( MSG_INFO,
+ "apup_process_beacon(...) Added APuP peer at %s with flags: %d,"
+ " capabilities %d",
+ mIfname, sta_ret->flags, sta_ret->capability );
++
++#ifdef UBUS_SUPPORT
++ hostapd_ubus_notify_apup_newpeer(hapd, mgmt->bssid, mIfname);
++#endif
++
++#ifdef UCODE_SUPPORT
++ hostapd_ucode_apup_newpeer(hapd, mIfname);
++#endif
+ }
+--- a/src/ap/ucode.c
++++ b/src/ap/ucode.c
+@@ -811,3 +811,21 @@ void hostapd_ucode_free_bss(struct hosta
+ ucv_put(wpa_ucode_call(2));
+ ucv_gc(vm);
+ }
++
++#ifdef CONFIG_APUP
++void hostapd_ucode_apup_newpeer(
++ struct hostapd_data *hapd, const char *ifname )
++{
++ uc_value_t *val;
++
++ if (wpa_ucode_call_prepare("apup_newpeer"))
++ return;
++
++ val = hostapd_ucode_bss_get_uval(hapd);
++ uc_value_push(ucv_get(ucv_string_new(hapd->conf->iface))); // BSS ifname
++ uc_value_push(ucv_get(val));
++ uc_value_push(ucv_get(ucv_string_new(ifname))); // APuP peer ifname
++ ucv_put(wpa_ucode_call(2));
++ ucv_gc(vm);
++}
++#endif // def CONFIG_APUP
+--- a/src/ap/ucode.h
++++ b/src/ap/ucode.h
+@@ -27,6 +27,10 @@ void hostapd_ucode_add_bss(struct hostap
+ void hostapd_ucode_free_bss(struct hostapd_data *hapd);
+ void hostapd_ucode_reload_bss(struct hostapd_data *hapd);
+
++#ifdef CONFIG_APUP
++void hostapd_ucode_apup_newpeer(struct hostapd_data *hapd, const char *ifname);
++#endif // def CONFIG_APUP
++
+ #else
+
+ static inline int hostapd_ucode_init(struct hapd_interfaces *ifaces)
--
2.43.2
More information about the openwrt-devel
mailing list