November 2023 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Nov 1 20:39:06 PDT 2023
Ending: Thu Nov 30 15:33:21 PST 2023
Messages: 175

• Adding a new platform: renesas rz   Mathew McBride
  • Adding a new platform: renesas rz   Michele Bisogno
    • Adding a new platform: renesas rz   Michele Bisogno
      • Adding a new platform: renesas rz   Torsten Duwe
      • Adding a new platform: renesas rz   Michele Bisogno
  • Adding a new platform: renesas rz   Torsten Duwe
  • Adding a new platform: renesas rz   Michele Bisogno
• [PATCH firmware-utils] add dlink-sge-image for D-Link devices by SGE   Paul Spooren
• [PATCH v2 firmware-utils] add dlink-sge-image for D-Link devices by SGE   Sebastian Schaper
  • [PATCH v2 firmware-utils] add dlink-sge-image for D-Link devices by SGE   Paul Spooren
• [PATCH v2 0/2] Add support for rtw8822bu   Alexis Lothoré
  • [PATCH v2 1/2] mac80211: split rtw88 configuration for each supported chip   Alexis Lothoré
  • [PATCH v2 2/2] mac80211: add support for rtw88_8822bu   Alexis Lothoré
• [PATCH] x86 64: Add new device Cordoba Edge Platform   Philip Prindeville
  • [PATCH] x86 64: Add new device Cordoba Edge Platform   Philip Prindeville
  • [PATCH] x86 64: Add new device Cordoba Edge Platform   Xiaojun Liu
• [sdwalker/sdwalker.github.io] eb55ce: This week's update   Stephen Walker
• [PATCH v1] x86 64: Add driver for Silicom Platform device   Xiaojun Liu
• [PATCH] valgrind: fix config missing in menuconfig.   quic_shoudil at quicinc.com
• [PATCH] treewide: disable CONFIG_SLUB_DEBUG in target configs   Rafał Miłecki
• [PATCH] kernel: provide better control & help for SLUB configuration   Rafał Miłecki
  • [PATCH] kernel: provide better control & help for SLUB configuration   Thibaut
• netifd issue   e9hack
  • netifd issue   Hannu Nyman
    • netifd issue   Felix Fietkau
      • netifd issue   Felix Fietkau
      • netifd issue   e9hack
      • netifd issue   e9hack
      • netifd issue   Felix Fietkau
      • netifd issue   Hannu Nyman
• [PATCH] kernel: of: remove "mac-address-ascii" support hack   Shiji Yang
  • [PATCH] kernel: of: remove "mac-address-ascii" support hack   Rafał Miłecki
  • [PATCH] kernel: of: remove "mac-address-ascii" support hack   Rosen Penev
• [PATCH] kernel: of: add DT MAC address bitwise operation support   Shiji Yang
  • [PATCH] kernel: of: add DT MAC address bitwise operation support   Rafał Miłecki
  • [PATCH] kernel: of: add DT MAC address bitwise operation support   Shiji Yang
• [PATCH] ath79: use "fixed-layout" for Embedded Wireless devices   Rafał Miłecki
  • Approved RE: [PATCH] ath79: use "fixed-layout" for Embedded Wireless devices   Catrinel Catrinescu
  • [PATCH] ath79: use "fixed-layout" for Embedded Wireless devices   Rosen Penev
• [PATCH ustream-ssl 1/2] ustream-mbedtls: Add compatibility with Mbed TLS 3.0.0   Hauke Mehrtens
  • [PATCH ustream-ssl 1/2] ustream-mbedtls: Add compatibility with Mbed TLS 3.0.0   Rosen Penev
    • [PATCH ustream-ssl 1/2] ustream-mbedtls: Add compatibility with Mbed TLS 3.0.0   Hauke Mehrtens
• [PATCH ustream-ssl 2/2] cmake: Fail if undefined symbols are used   Hauke Mehrtens
  • [PATCH ustream-ssl 2/2] cmake: Fail if undefined symbols are used   Rosen Penev
• [PATCH 0/2] Enable USB serial console on the D-Link DNS-313   Linus Walleij
  • [PATCH 1/2] kernel: usb: Autoprobe g_serial   Linus Walleij
    • [PATCH 1/2] kernel: usb: Autoprobe g_serial   Chuanhong Guo
      • [PATCH 1/2] kernel: usb: Autoprobe g_serial   Linus Walleij
    • [PATCH 1/2] kernel: usb: Autoprobe g_serial   Lech Perczak
  • [PATCH 2/2] gemini: Activate serial USB console on the DNS-313   Linus Walleij
• [sdwalker/sdwalker.github.io] 141bf6: This week's update   Stephen Walker
• Adding a new x86 image or related packages to the default x86 image   Philip Prindeville
  • Adding a new x86 image or related packages to the default x86 image   Elliott Mitchell
    • Adding a new x86 image or related packages to the default x86 image   Paul Spooren
      • Adding a new x86 image or related packages to the default x86 image   Daniel Golle
      • Adding a new x86 image or related packages to the default x86 image   Elliott Mitchell
      • Adding a new x86 image or related packages to the default x86 image   Daniel Golle
      • Adding a new x86 image or related packages to the default x86 image   Elliott Mitchell
      • Adding a new x86 image or related packages to the default x86 image   Philip Prindeville
      • Adding a new x86 image or related packages to the default x86 image   Elliott Mitchell
      • Adding a new x86 image or related packages to the default x86 image   Philip Prindeville
      • Adding a new x86 image or related packages to the default x86 image   Petr Štetiar
      • Adding a new x86 image or related packages to the default x86 image   Daniel Golle
      • Adding a new x86 image or related packages to the default x86 image   David Bauer
      • Adding a new x86 image or related packages to the default x86 image   Petr Štetiar
      • Adding a new x86 image or related packages to the default x86 image   Til Kaiser
• Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Hannu Nyman
  • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Thibaut
    • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Petr Štetiar
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Thibaut
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Robert Marko
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Petr Štetiar
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Thibaut
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Petr Štetiar
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Thibaut
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Petr Štetiar
      • Unbalanced prioritization in the images buildbot? (main branch deprioritized too much)   Thibaut
• [PATCH 00/20] Kernel build fixups, split object directory off (partial WIP)   Elliott Mitchell
  • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Elliott Mitchell
    • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Felix Fietkau
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Elliott Mitchell
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Felix Fietkau
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Elliott Mitchell
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Jonas Gorski
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Elliott Mitchell
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Felix Fietkau
      • [PATCH 07/20] kernel: copy all built kernel modules to root filesystem image   Elliott Mitchell
  • [PATCH 06/20] kernel: remove drivers marked as modules   Elliott Mitchell
    • [PATCH 06/20] kernel: remove drivers marked as modules   Bjørn Mork
      • [PATCH 06/20] kernel: remove drivers marked as modules   Elliott Mitchell
  • [PATCH 08/20] build: add make variables for kernel source and object directories   Elliott Mitchell
  • [PATCH 10/20] [WIP] build: use dtc from $(LINUX_OBJ_DIR)   Elliott Mitchell
  • [PATCH 11/20] [WIP] package/target: update to get modules from $(LINUX_OBJ_DIR)   Elliott Mitchell
    • [PATCH 11/20] [WIP] package/target: update to get modules from $(LINUX_OBJ_DIR)   Elliott Mitchell
  • [PATCH 12/20] [WIP] build: adjust include paths to use LINUX_SRC_DIR/LINUX_OBJ_DIR   Elliott Mitchell
  • [PATCH 13/20] [WIP] build: point user_headers at $(LINUX_OBJ_DIR)   Elliott Mitchell
  • [PATCH 14/20] [WIP] build: update quilt references to use $(LINUX_SRC_DIR)   Elliott Mitchell
  • [PATCH 15/20] [WIP] package: update packages with explicit make flags   Elliott Mitchell
  • [PATCH 16/20] [WIP] build: point kernel build tasks at $(LINUX_OBJ_DIR)   Elliott Mitchell
  • [PATCH 17/20] [WIP] build: split kernel object directory from kernel source directory   Elliott Mitchell
  • [PATCH 18/20] [WIP] build: point remaining obvious cases at $(LINUX_SRC_DIR)   Elliott Mitchell
  • [PATCH 19/20] [WIP] build: point remainder at $(LINUX_SRC_DIR)   Elliott Mitchell
  • [PATCH 01/20] ppp: make copy of compiler_types.h unconditional   Elliott Mitchell
  • [PATCH 20/20] [TEST] TESTING: try separating build from sources   Elliott Mitchell
    • [PATCH 20/20] [TEST] TESTING: try separating build from sources   Elliott Mitchell
  • [PATCH 03/20] bcm27xx: fix device-tree support patch for split source/build dirs   Elliott Mitchell
  • [PATCH 02/20] package/lantiq: use make -C instead of `cd;`   Elliott Mitchell
  • [PATCH 09/20] [WIP] build: split $(DTB_DIR) off of $(DTS_DIR)   Elliott Mitchell
  • [PATCH 04/20] patch: always backup files   Elliott Mitchell
  • [PATCH 05/20] build: merge Kernel/Prepare steps together   Elliott Mitchell
• [PATCH 00/11] Misc kernel config cleanup and small adjustments   Elliott Mitchell
  • [PATCH 06/11] Revert "x86/geode: enable X86_INTEL_LPSS to select PINCTRL"   Elliott Mitchell
  • [PATCH 01/11] kernel: change CONFIG_HW_RANDOM default to y   Elliott Mitchell
  • [PATCH 02/11] kernel/generic: remove CONFIG_FB_NOTIFY   Elliott Mitchell
  • [PATCH 03/11] kernel: purge CONFIG_FS_MBCACHE   Elliott Mitchell
  • [PATCH 04/11] kernel: remove ext2 support from kernel   Elliott Mitchell
  • [PATCH 05/11] kernel/x86: remove CONFIG_HDMI   Elliott Mitchell
  • [PATCH 07/11] kernel/x86: move Geode HW random from generic to geode   Elliott Mitchell
  • [PATCH 08/11] kernel/x86: move SCx200 support from generic to geode   Elliott Mitchell
    • [PATCH 08/11] kernel/x86: move SCx200 support from generic to geode   Stefan Lippers-Hollmann
      • [PATCH 08/11] kernel/x86: move SCx200 support from generic to geode   Elliott Mitchell
  • [PATCH 09/11] kernel/x86: remove CONFIG_M686 from common configuration   Elliott Mitchell
  • [PATCH 10/11] packages/x86: detect architecture, not x86/64 target   Elliott Mitchell
  • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Elliott Mitchell
    • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Stefan Lippers-Hollmann
      • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Stefan Lippers-Hollmann
      • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Elliott Mitchell
      • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Stefan Lippers-Hollmann
      • [PATCH 11/11] kernel/x86: enable x32 support for amd64   Elliott Mitchell
• [PATCH] kernel: drop "mac-address-increment-byte" DT property support   Rafał Miłecki
• OpenWrt 23.05.2 - Service Release   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 2/2] ipq40xx: add support for Aruba AP-303   Luca Olivetti
  • [OpenWrt-Devel] [PATCH 2/2] ipq40xx: add support for Aruba AP-303   Robert Marko
    • [OpenWrt-Devel] [PATCH 2/2] ipq40xx: add support for Aruba AP-303   Luca Olivetti
      • [OpenWrt-Devel] [PATCH 2/2] ipq40xx: add support for Aruba AP-303   Sridhar
• Xen VM Configuration example   Elliott Mitchell
• [PATCH] dnsmasq: mark global ubus context as closed after fork   Sven Eckelmann
  • [PATCH] dnsmasq: mark global ubus context as closed after fork   Eric
• [PATCH v2] dnsmasq: mark global ubus context as closed after fork   Sven Eckelmann
• Best practices for shell libraries (specifically error-checking)   Philip Prindeville
  • Best practices for shell libraries (specifically error-checking)   reiner otto
  • Best practices for shell libraries (specifically error-checking)   Paul D
• [sdwalker/sdwalker.github.io] 7df39f: This week's update   Stephen Walker
• Słowa kluczowe do wypozycjonowania   Kamil Tralewski
• Describing LEDs roles in device tree?   Rafał Miłecki
• [PATCH] mediatek: filogic: add Acelink EW-7886CAX support   Rafał Miłecki
  • [PATCH] mediatek: filogic: add Acelink EW-7886CAX support   Daniel Golle
• [patch] ubox: logread: add option to filter priority (log level)   Isaev Ruslan
• [PATCH] ipq40xx: add PCIe magic hack to improve VRX518 compatibility   Felix Maurer
• [PATCH] firmware-utils: bump compat_level for EAP615-Wall   Stijn Segers
  • [PATCH] firmware-utils: bump compat_level for EAP615-Wall   Sander Vanheule
    • [PATCH] firmware-utils: bump compat_level for EAP615-Wall   Stijn Segers
• Battlemesh x OpenWrt meeting in Cyprus?   Paul Spooren
  • Battlemesh x OpenWrt meeting in Cyprus?   Arınç ÜNAL
    • Battlemesh x OpenWrt meeting in Cyprus?   Hauke Mehrtens
      • Battlemesh x OpenWrt meeting in Cyprus?   Arınç ÜNAL
      • Battlemesh x OpenWrt meeting in Cyprus?   Daniel Golle
• unreliable AP VLAN Interfaces 23.05   André Valentin
• [PATCH] mediatek: filogic: add support for GL.iNet GL-MT2500   Enrico Mioso
  • [PATCH] mediatek: filogic: add support for GL.iNet GL-MT2500   Daniel Golle
    • [PATCH] mediatek: filogic: add support for GL.iNet GL-MT2500   Enrico Mioso
• [PATCH V2] mediatek: filogic: add support for GL.iNet GL-MT2500   Enrico Mioso
• [PATCH RFC] base-files: execute package's "postinst" after executing uci-defaults   Rafał Miłecki
• [PATCH] uhttpd: uhttpd-mod-ubus: reload uhttpd only if it's runtime install   Rafał Miłecki
• [sdwalker/sdwalker.github.io] 12bc2b: This week's update   Stephen Walker
• [PATCH] kernel: force atomic renames in ubifs   Rafał Miłecki
• [PATCH] kernel: add kernel module support for input sparse devices   Xiaojun Liu
• libubox compile issue   e9hack
  • libubox compile issue   Felix Fietkau
• United Nations Announcement for Battlemesh x OpenWrt summit   Arınç ÜNAL
• ARM BCM53573 SoC hangs/lockups caused by locks/clock/random changes   Rafał Miłecki
  • ARM BCM53573 SoC hangs/lockups caused by locks/clock/random changes   Linus Walleij
• [PATCH 1/5] scripts/kconfig.pl: fixup subroutine style   Elliott Mitchell
• [PATCH 2/5] scripts/kconfig.pl: modify config_and()/config_sub() to match other ops   Elliott Mitchell
• [PATCH 3/5] scripts/kconfig.pl: switch to using function references/hash for operators   Elliott Mitchell

Last message date: Thu Nov 30 15:33:21 PST 2023
Archived on: Wed May 29 14:32:16 PDT 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...