[PATCH 0/2] mvebu: use PHY LED trigger "SPEED" LEDs on FortiGate 50E

[INAGAKI Hiroshi]

Enable PHY LED trigger on mvebu/cortexa9 and use it for each "SPEED" LEDs
on Fortinet FortiGate 50E to indicate 100M/1000M link speed on each ports.

When I add the support for 50E, I forgot that trigger and set netdev(link)
trigger for green:speed_* LEDs instead.
But I recently noticed PHY LED trigger which can be used to indicate link
speed (100M/1000M), so replace the default trigger to it.

INAGAKI Hiroshi (2):
  mvebu: cortexa9: enable Ethernet PHY LED trigger
  mvebu: use PHY LED trigger for speed LEDs on FortiGate 50E

 .../mvebu/cortexa9/base-files/etc/board.d/01_leds    |  9 ---------
 target/linux/mvebu/cortexa9/config-5.15              |  1 +
 .../arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts | 12 ++++++++++++
 3 files changed, 13 insertions(+), 9 deletions(-)

-- 
2.39.1.windows.1