[PATCH] ipq807x: prpl-haze: fix sysupgrade flashing from bootloader

Petr Štetiar ynezz at true.cz
Thu Jun 29 07:51:34 PDT 2023

While flashing sysupgrade image from U-Boot, then the rootfs_data
overlay filesystem formatting is left for the fstools during firstboot,
but that wont work as mkfs.f2fs is missing in the sysupgrade image:

 mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
 mount_root: no usable overlay filesystem found, using tmpfs overlay
 sh: mkfs.f2fs: not found

 Filesystem                Size      Used Available Use% Mounted on
 /dev/loop0              139.6M     46.9M     92.6M  34% /overlay

 Number  Start (sector)    End (sector)  Size       Code  Name
  20           98850          406349   150.1 MiB   FFFF  rootfs

So lets fix it by adding f2fs support to the sysupgrade image.

Signed-off-by: Petr Štetiar <ynezz at true.cz>
 target/linux/qualcommax/image/ipq807x.mk | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/target/linux/qualcommax/image/ipq807x.mk b/target/linux/qualcommax/image/ipq807x.mk
index 54f8caf5d7a2..555c723c5f42 100644
--- a/target/linux/qualcommax/image/ipq807x.mk
+++ b/target/linux/qualcommax/image/ipq807x.mk
@@ -115,7 +115,8 @@ define Device/prpl_haze
 	DEVICE_DTS_CONFIG := config at hk09
 	SOC := ipq8072
-	DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
+	DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci \
+		mkf2fs f2fsck kmod-fs-f2fs
 TARGET_DEVICES += prpl_haze

More information about the openwrt-devel mailing list