[PATCH] ramips: add support for Huasifei WS1208V2

[Enrico Mioso]

On Thu, 26 Jan 2023, Arınç ÜNAL wrote:

> Date: Thu, 26 Jan 2023 20:40:15
> From: Arınç ÜNAL <arinc.unal at arinc9.com>
> To: Enrico Mioso <mrkiko.rs at gmail.com>
> Cc: openwrt-devel at lists.openwrt.org
> Subject: Re: [PATCH] ramips: add support for Huasifei WS1208V2
> 
> On 26.01.2023 22:31, Enrico Mioso wrote:
>> 
>> 
>> 
>> On Thu, 26 Jan 2023, arinc9.unal at gmail.com wrote:
>> 
>>> Date: Thu, 26 Jan 2023 19:35:27
>>> From: arinc9.unal at gmail.com
>>> To: openwrt-devel at lists.openwrt.org
>>> Cc: Arınç ÜNAL <arinc.unal at arinc9.com>
>>> Subject: [PATCH] ramips: add support for Huasifei WS1208V2
>>> 
>>> From: Arınç ÜNAL <arinc.unal at arinc9.com>
>>> 
>>> The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with 
>>> a
>>> Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.
>>> 
>>> Specifications:
>>> - MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
>>> - MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
>>> - Quectel RM520N-GL Cellular Modem
>>> - 2 WLAN & 4 Cellular Antennas
>>> - 5 Gigabit Ethernet Ports
>>> - 1 USB 2.0 port
>>> - 1 PCI-E Slot
>>> - 1 M.2 slot
>>> - 1 SIM card slot
>>> - 1 SD card slot
>>> 
>>> Installation:
>>> - Install sysupgrade image via ROOter OS.
>> 
>> Thanks a lot! Seems a nice device.
>> Does it offer any recovery mechanism? In case it does, would you mind 
>> adding the procedure description to this commit? Thanks!
>
> No special recovery mechanism is there. It's the usual tftp recovery with 
> U-Boot.
>

Thanks for the information. Maybe you can specify if the UART is needed and write in the commit a suitable command to recover the device (e.g.: via tftpboot if that's the right one).

Thanks again,

Enrico
> Arınç
>